[Overview] The MHP-15 Full Auto Katana Mag Flywheel Blaster
ฝัง
- เผยแพร่เมื่อ 22 มิ.ย. 2018
- Overview, Chrony and Accuracy test of Heath Heil's MHP-15 full auto, katana mag fed flywheel blaster which fires half-length darts.
Heath's Thingiverse files: www.thingiverse.com/thing:282...
Heath's TH-cam: / @heathheil
Heath's Instagram: mrheathpant...
Katana adapter: www.jet-blaster.com/product/k...
Katana spare mags: www.jet-blaster.com/product/p...
#MHP15 - บันเทิง
Damn you're lucky. Also, what are you using for those mag pouches? Also you're lowest is 125. 3fps. Think you forgot that.
Arsenic, I'm using these rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com.au%2Fulk%2Fitm%2F183194296181
Also yeah just noticed that lol
Bradley Phillips are you sure that's the correct link? It just automatically closes the tab.
m.ebay.com.au/itm/Tactical-9mm-Molle-Pistol-Mag-Pouch-Military-Magazine-Holster-Fastmag-Quick-Pull-/183194296181?_mwBanner=1&_rdt=1
Hope that link works now. The first one I clicked share and copied the link.
You think they would fit in here? www.amazon.com/dp/B004BHYTNC/ref=cm_sw_r_cp_tai_qq5QEb3N4DFET
I *LOVE* Heath's jamdoors. These look awesome, should be pretty scary going up against two. That's awesome he actually built them himself for the commission and didn't just send you the parts or something aha
“Since this is a close range blaster I’ll be merely 100ft away” ummmm no
Omg sweet you got one of these ?!?! Awesome! love heath hail’s work! Can’t wait for the gameplay!!!
All these open source blasters really make me want to invest into Katana. I’m really excited for his desert pigeon blaster!
Ben Lam me too!
Maybe for dual wielding put pouches on both hips, facing up? So you can slam the blasters down and reload instantly. Love Heath's work as always.
Quindarious Gooch, I think the other mags would get in the way
Bradley Phillips th-cam.com/video/VI4NZW8q6nU/w-d-xo.html
Lol saw that video the other day, it's hilarious
i enjoy rewatching your video. it helps me when i can't play with my friends or its pooring raining out side. thank you 😏
😍😍😍 those are some dope blasters!!
This was a very nice review, thank you. I hope these blasters serve you well in the field
Heath Heil, I'm sure they will. I'll try to repair the mag lever this week sometime using epoxy.
How much would it cost me to get a fully assembled custom one?
Where do I buy them?
Jef Liu I start these guys at 200 plus shipping. You can send me an email at heathheil@hotmail.com and we can discuss a commission
Bryan Vangilder I might be able to take a commission, but I'm not sending anything for free
I can't wait to finish mine!
Dude, that looks badass.
Heath made you those himself? You lucky duck....
LightningEagle14, sure did
If you're interested in one, send me an email, and we could work out a commission ;)
Heath Heil As awesome as it would be to commission something from you, I really just couldn’t afford it. Sorry :(
LightningEagle14 I totally understand
@@HeathHeil health I got a great deal for you.
How about we take things to next nerf level.
Are you up to the challenge?????
Coolest flyweel blaster
Swweeettttt!!! That't a nice lookin blaster!!! liked as ways :-)
*Wow!*
Wow this looks promising
Woah! Those worker darts in slo-mo sound awesome!
Arkaovos 717, like artillery
Mate if we don't get dual wielding gameplay fronm the next war there will be porblems.
Sir Benny, I've tried friction fitting the katana mags using electrical tape, but the tightness on the mags causes the follower to get stuck.
Bradley Phillips, sorry, let me clarify.
If we don't get dual wielding footage from the next war after you've gotten the replacement mag release, there will be problems ;)
I'll try epoxy
@@Load_the_ducks the real question: did he have problems?
I'm a bit of a newbie in this, why don't these use 18650 batterys? (vape batterys)
We’re can i buy it
Siiiiiick!
HOLLY MOLLY I NEED THOSE
Did u get a holster for the blaster?
😳 ......holy crap.
idc if you like real guns or airsoft guns, you have to admit, that is a sexy gun
Usually for chrono tests on full auto people seem to use mags with just one dart in them, but this is probably better, since it accounts for flywheel rpm sag, as small as it might be.
J yang, yeah that would give a low reading for this since I can't get it to full RPM before it fires by design
Looks amazing. With that mag rig u have U could reload by having the mag facing up N the right way. Then just reach back and push blaster down on mag. It will clip in then pull up to pull out of pouch. It will be crazy quick. Less fiddled. Link bad ads lol. The 3d printed arms race is heating up. TkEZ»UK
Ian Farquharson, I tried doing that and my mag holders grip too tight such that I think it would break the mag release lever rather than pull the mag out. Also with three mags all in the pouches the ones next to it kinda get in the way. Good idea though.
I’m lucky in that I get to play with and against Heath pretty regularly. You should see him rock one of these.
Jeremy Tyler, I've watched some of his gameplay footage with it. Looks very effective.
How can i get that?
How do you plan to carry your MHP-15 whilst using a springer
Harry Shaw, just a single point sling around at my back.
Where di you get the katana mag holders? Been looking for cheap ones of them for ages
ALPHA, in the pinned comment. ;)
Do you know how he set up the double trigger? I'd like my Stryfe to both rev and fire using just one trigger.
Senior XJ, probably best asking Heath himself. I've never wired up a blaster.
I've tried it in a stryfe, and it's not pleasant. The trigger oull isn't really ling enough for a full rev, and then spamming shots isn't easy. This has an auto pusher in the single switch too, so it takes extra time between rev and shot by default, which it sort of needs for single switch
Could you show the internals so i know how to make it please?
I don't have this one anymore but it's likely Heath Heil has a video on how to assemble
Love the fact you bought two! Try turning your mags the other way up in the pouches and go full lara croft
Foam Alliance UK, the mags next to it get in the way, and the mag lever I doubt it strong enough to not break from the pulling. I already broke one so far (repaired it now though)
Thats sombras gun mate
Joseph Morales, oh cool, it does look like that gun from Overwatch. Wonder if Heath took inspiration from it.
Thought the 004 was an ammo counter from the thumbnail lol
Hey what chrony did you use for this vid?
Superboom 101, it's an Xcortec
Where can i buy this
Jakob Gwinner, anyone can do it, it's open source and 3D printed. But Heath Heil made mine.
how did you buy this
I sent Heath Heil a jar of money.
Looks like bloody uzi!
No.
I want to make one myself but not sure about if it works with 180 motors please ask him
Allen Hasbun it will, but the motor cover won't fit. I didn't have extra 180s in hand toeasire while I designed that part
I will stick to Neo Rhinos then
And one thing how did you get so many nerf screws do you have a link to where you bought it If you did and what did you print it in
Allen Hasbun I've been modding for over 3 years... That's a lot of accumulated screws
What do you recommend to print this in because my makespace only prints pla so if it’s like pc I should print it in I got to wait for my printer to come
Bradley, is your friend willing to assemble the gun for me? and how much would it cost?
Will need to check with Heath on the price. Look him up on Facebook. Heath Heil.
can I buy this fully assembled?
Charles Randall, you can. I suggest contacting Heath Heil.
I NEED THEASE if only i had a 3d printer WAIT HILL AIRFORCE BASE HAS 1 oh wait im not close to getting perms ther :(
Ohhh looks kinda like Dokeabis gun
How come I can't ever find someone who can build this for me? Willing to pay
for mag pouches flip the mags upside down and just slam the mags in
Who thinks this might be a great sombra prop gun for overwatch
It- ITS A NERF UZI!
ive ordered mine but i need a lipo i can get in au
taj adhial m.ebay.com.au/itm/RC-Turnigy-Bolt-V2-1000mAh-3S-65-130C-High-Voltage-Lipo-Pack-/162650382566?_mwBanner=1&_rdt=1
thanks and may i ask about a charger im new to the whole lipo scene
I use an imax B6. Also get a fireproof bag for putting it in while charging.
do you know the specific model
I have just the normal one
Do the dart test with them
Actually plan to do it with a different blaster soon which does full lengths too
@@BradleyPhillipsYT ok. Sounds like a great video
Holy shit it's an smg!!!
What is the ammo???
bananabro 1 9 1, Worker darts
Bradley Phillips thx dude PEACE!!!!!
If you have the mags pointing up instead of down you could reload faster
Possibly, but then your darts may fall out while running.
Wow nerf uzi
cool, finally a nerf uzi
everyone associates full auto pistols with uzi’s, what about mac 10 or glock 18
numbers are inconvenient, and it looks more line an uzi then the mac 10 or glock 18. you can mention another one that looks like it, but i've probably never heard of it
1:51 people load 1 dart into the mag shoot and repeat but your way is cooler
Nerf MAC-10
NEW NERF MP7 SMG
😐 ....😱*girlie scream*😱
Time to update nerf gears...
For what I can see air soft already catch gunpowder and nerf already catch airsoft 🤔
Waterguns are always behind, but I saw some good improvements 🤷♂️
JUST SAY IT IS AN MP7
100 ft? That's not close range
Closer than 200ft
@@BradleyPhillipsYT you're not wrong, but you're not right either
Drum mag
Aren't u a lil old to be playing with nerf guns? 🤷♂️
Says the person watching videos about Nerf blasters.