VIOFO A129 Duo Dash Camera 3-Wire Hardwire Installation, Unboxing, and Setup | 2019 Acura RDX A-Spec
ฝัง
- เผยแพร่เมื่อ 30 ก.ย. 2019
- The A129 is a full-featured camera with all the bells and whistles, while keeping prices low compared to the other cameras in its class.
We go through some setup and tips, and a general installation (Although this is specifically on a 2019 Acura RDX A-Spec), including the hardwiring portion. The installation techniques in this video is applicable to most, if not all vehicles!
Only DASHOTO.com's bundle includes the hardwiring accessories shown in this video.
You can purchase the A129 at:
www.dashoto.com
VIOFO A129: amzn.to/32S7KKu
VIOFO A129 PRO: amzn.to/3cCrCWk
And you can purchase the DASHOTO installation kit here:
DASHOTO Installation Toolkit: amzn.to/2PSFkLf
Tip: Before mounting the camera check that windscreen wiper blades do indeed reach that spot so its always clean.
THANK YOU, I would not have considered that.
For the rear camera as well, if you have a wiper there.
Smart!
or hit me up to ceramic coat your glass and you wont have to worry
this is point 3. on page 13 of the installation manual that comes with the camera lol
I've just discovered fuse taps, thank you for this video. I learn something new everyday.
very helpful. i was pondering to order one or not and this youtube led me to the final decision to get this gadget.
Thanks for the review :)
Great video...for the front camera, was waiting for the rear install, but it was not to be 🤷♂️
i heard bout this cam....will get this cam after watching this vid! thnx!
Glad you enjoyed it! Remember, you only get the install kit with the DASHOTO bundle :)
Helpful info but damn if that isn't the most repetitive annoying background music
No idea what you are talking ab ♫DOOTA DOOT DOOTOO, DOOTA DEET DOOTOO♫
Jon Agreed. Didn’t make my ears bleed much at all. 🎼zeeel zooo zeee zaaa zeeel zooo zeee zaaa🎼
Someday TH-cam will let you change the background music if the creator has opted for an arbitrary YT backing track
Annoying. Duck the music more and fade it out. No need for it.
I was ready to see that airbag deploy
The orientation of the fuse takeoff matters. The +12V supply from the fuse box terminals is intended to be on the fuse terminal furthest away from the wire on the takeoff. That will feed 12V from the fuse box to both fuses. If you reverse the takeoff, then the original fuse is feeding both the original circuit in the car and the dash cam (through the second fuse in the takeoff adapter).
That increases the current through the original fuse, which is fine in most cases.
I don't have the kit yet, I ordered the duo camera camera kit and optional harness for my Camry Hybrid a week ago from Amazon. I have a couple questions. The circuit tester, what brand did you use? Also, did you disconnect the car battery at any point and did you use a circuit keep alive plug in as to not lose any settings? Thanx
Great video, but it ended like the Sopranos...lol
I learned something new from this video today and that there is a word "unboxening". I'll have to add that word to my language skills library.
Thanks for the informative and easy to comprehend video! Also, is there a reason why you have the camera offset to the passenger's side rather than mounting directly under the rear view mirror? Thanks!!!!
Nice video, question can I ask the best method of hiding the wire, i wired the rear dash cam and have about 4 ft of wire left over,, do i just tuk it all under the roof panel or do i cut and solder it ?
Thx
When you put the original fuse near the prongs, what fuse type do you put in the other fuse port near cable? You did not cover this. Should I put in a 3A, 5A, 10A? Missing vital information. Please advise thanks
Hi, nice review. If the dash cam detected an incident during parking mode. How does it notify you when you've returned to your car?
It actually does not notify you; but it will have a locked recording if there was an impact. Otherwise, all motion recordings are going to be overwritten eventually.
Definitely recommend checking the vehicle for any damage before driving off!
The videos dont flow smooth, I think I changed the bitrate? Whats the proper settings for normal video speeds? Thanks!!!
The wiring that I received for Viofo had it marked Battery (red wire), ACC (yellow), and ground (black). The red is connected directly to the battery. My question is would that require some kind of in-line fuse to be connected to the red wire and the battery?
What size fuse go in wire taps ? One is original and what about the other ? What amp is it ?
0:12 I love unboxening videos!
Can an additional cabin cam can be added to this camera since it only comes with rear cam not the insider cabin cam ?
What size bullet connectors are needed to connect the hardware kit to the fuse taps?
Do you need to use the battery wire if you don’t want constant? Just use the ACC only?
Please do a video showing the parking mode
Hey! If i don't want to use the parking mode, is it enough to connect ONLY the ACC wire?
I love the video I see that you only connect the accessory cable (yellow cable) and not the battery cable( Red) is that not needed to be connected? Just want to clarify before buying it.
At 3:04 he talks about constant 12V and ACC. After this he demonstrates how to use bullet connectors from his kit. You can buy separate taps from Amazon. You need to connect all 3 to work. For my application I will put ACC (yellow) to Audio/Nav, Battery (red) to door lock so I can enable the Park function. Also plug the USB power cable to the CAMERA and not the base unit. HTH
Hello everyone and DASHOTO, I'm looking to hardwire my dash cam on the 2022 Acura MDX, I just wanna make sure what type of fuse are those? And what fuse slot are you using? Since this is a 2019 RDX I'm assuming that both cars are typically the same. I tried looking at the manual and online and could not find the answer. Thank you!
Shows us a dual camera. Only shows install of front camera. Fail.
If my vehicle has an DC outlet that has power even with ignition off, can I use parking mode in this model without the hardwire kit and just use the included power supply? I ask because my model car does not have internal fuse box, everything is in the engine bay.
Would the wiring kit work for the A119 V3 version?
Do i need the optional hardwire kit if I'm using a Cellink Neo?
I have bought a hardware kit to make the camera work while the car is off and make it a recording while in motion only, but I want to make it work like a normal dash cam while the vehicle is moving. How do I switch between the two modes?
Question: So you're saying that if I'm using the hardwire kit and I plug it into the GPS modue, I can't use parking mode?? Just want to clarify. If so, then I can't use the GPS features on my Viofo with the hardwire kit. Please let me know. Thank you.
On the device screen is there a way to switch between front or back live feed?
I enjoyed this thorough review! 👍I picked this up last week and love it. Would you know if its possible to leave the screen always on while driving? Its still recording but the screen shuts off on its own after like 20-30 secs. I couldnt find any options in the settings. Thanks for the great review! 💯
Yup! You should actually see it under the screen saver setting near the bottom of the list, just turn it off
I really wish I had one of these earlier today as I just witnessed a hit and run and couldn't even tell the police the make and model of the car that was right in front of me. At least I'll have it for next time.
How do you feel about putting the dash cam on the driver side??
what new fuse amp do you use for the new dashcam?
What would happen if I connect power to USB port on the dongle and have parking mode on?
I have a 2021 rdx I did the exact same thing but my start-stop stopped working
Does yours work?
The kit says currently unavailable on Amazon. Do you have any other alternatives??
As I hear the explanation on your video about the hardwiring kit, as I purchased the A129 Duo is it right to say if I am using the parking mode and mine have the GPS dock for the front camera if I plug the cable on top (GPS) it won’t work for parking mode and I have to plug on the side (and lose GPS function)? Thanks
You won't lose GPS function when plugged into the side of the unit
The GPS will still be powered, and you'll have both parking mode and GPS
I think they changed this on new units Vortex radar (youtube) says you can use either power port now, and have parking mode.
Do you all still offer the installation kit free of charge with each dash cam purchase? I don't see any mention of this on your website and see it listed for $19.99.
Hi Donnie,
We do! The dash cameras on the website should have a drop down with the addition of "hardwire kit + installation kit". This option only charges for the hardwire kit, but the installation kit is still included free
So basically as long as you're getting a hardwire kit, you'll get it bundled with the installation kit for free
Didn't cover installation of the rear camera??
so after we hardwire...we have to plug into the usb not power slot ...so we can record while parked?
wait happened after you connect to the wifi and where is the video quality of the camera ?
I have a few questions. Why the camera is mounted on the passenger side? And I received two plastic films looking like screen protectors with my dashcam. As far as I understood thet are placed where the camera is mounted to reduce glare. Is it correct?
Nice review! Do u guys also have a Canadian Amazon link? Thank u :)
Yup :)
www.amazon.ca/Bundle-Installation-Channel-Hardwiring-Included/dp/B07HMBBFLP/ref=sr_1_10?keywords=viofo+a129&qid=1570037559&sr=8-10
What about the rear camera install?
If I don't want to use parking mode can I simply not hook up the RED/battery wire and just go with YELLOW/acc and ground??
I purchased an installation kit that didn't come with the attachments you had. I had to purchase a fuse tap myself. Also, my Door fuse and ACC are both constant 12V and are 15A, would it matter if my fuse tap is 10A and can i use both of those for the Dashcam? Another thing, mine didn't come with the extra fuse yours has just incase something were to happen. Where can i purchase those and what are they called?
You really should have purchased our kit then ;)
It's perfectly fine if you use the 10A fuse tap. That being said, 10A is a bit high but it'll still protect against short circuit scenarios.
For extra fuses, you can purchase those from any local auto store, they're pretty common
And the red cable?
Wouldn't this kill the battery when the car is off? btw I just picked up a TLX A-Spec 2020 !
Oh perfect! The TLX is a great car, congrats!
The hardwire kit actually has a cut-off built in, as long as it's installed correctly. You can set the voltage cutoff to your preference-- no battery issues here.
What if we don't want to parking mode? Do we still have to connect the RED wire?
Hey I'm attempting to do this as well. Question regarding the grounding bolt, did you disconnect the negative terminal on your battery before doing this or just removed it with nothing else done beforehand? Would this affect anything on the RDX?
No need, just make sure you hook the camera up after you've connected all the cables and checked they are correct.
You can't use obd2 for parking mode?
I want to use 2 spare fuse slots both have a 10amp fuse, I already tested and one is constant for the battery cable and one not for the accy but my fuse tap kit came with only 10 or 20 amp. Is it ok to use the 10 amp since nothing else is connected to the spares or should I buy 5amp?
It will be fine to use the 10A. The camera itself really only draws about 2A. The 10A fuse that's there will still be good for protecting against short circuits.
I have a question, I just set up my VIOFO A129 Duo with the hardwiring kit and was wondering if the power light stays on (on the cam) when in parking mode (when the vehicle is off) or does it go off or does the camera wake up once it notices movement outside the vehicle. Please let me know. Thanks.
Did you ever get an answer?
@@amyk9813 no
I just hardwired my dash cam but it doesn’t stay on in parking mode. What fuses are the Dashoto fuses? I used 7.5A fuses with my fuse taps.
Sounds likebyour bartery is dropping below the set voltage setting on the wiring kit; or you wired into a system that cuts power after a set amount of time that the vehicle is off and locked.
When will your website be back up?
How can i get the A129 duol kit from yous
What kind of "wings" are you using at @5:20.
Are you able to flip the front, if in case of getting interfered with an officer?
No only up and down, cannot be turned of to left or right,
My fuse taps did not come with any fuses. Is there a standard amperage for a fuse for dashcams. I keep running into 5A but I want to be sure. Thank you.
I am using 7.5A for the dash cam power leads. You can likely use 5A, but I wanted a bit more safety margin.
Very good Podcast. I have a small question what is the other fuse called to go behind the original fuse and is it the same amps and do you know the 12v batt and the accessory position for the G37? coupe
I watched this video to see how long the rear connector cable is and it wasn't even covered in this video.
Is this an 2019+ rdx? Pedals reminds me of the Aspec trim
Nevermind. it is. I just heard the noise it makes when you shut the rdx off lol
why not use the top power input port it would make a neater job.
Can the rear camera be hooked up to my kenwood stereo via yellow video cable?
Yes, but you'll need the optional AV out cable from VIOFO, which is a bit hard to find nowadays. It's a standard 3.5mm cable if that helps.
@@DASHOTO thank you.
I guess the battery cutoff means that parking mode will deactivate, and it won't record once the battery reaches the cutoff?
That's correct! This is a safety feature so the camera does not run the vehicle battery too low
@@DASHOTO So to have parking mode on, is it still being set to 12v, then wehn the camera detects something it turns on, records for a bit, then cuts off....?
@@T0Msykes That's correct, top dash cameras will work like this.
They enter a "standby mode" to wait for motion, and when motion is detected, it will start recording again.
This outfit sells piggyback Fuse holders, way slick Idea...........I ran from camera, under the windshield rubber under to the door post trim, passenger side and under the dash right into the fuse box driver side ..........Now If I can get a 2 minute loop going only when the ignition is on, engine running only, life well be good...........
is the hardwire kit necessary to run the parking mode ?
I wasn't expected to break my car into pieces when I bought the camera. I hope this is optional.
Only have to do this if you want the parking mode. If not, then you can use the cigarette lighter and hide the cable.
@@levihonsvick7716 oooooooH! Thank you, now I am more than interested to do it.
@@Chibby-Chubby any grown man or teenagers should have about common sense and be competent enough to run a couple wires in his vehicle.
The video was like cut off. Where's the other part?
Does this A129 Duo has Buffered Parking same as the one on A129 Pro Duo? I heard there’s some update but not really sure. Thanks.
Will hardwiring this dash cam drain my battery on my car?
Does it work even without wifi?
Yup! All options are available on screen with the buttons!
It would help if u didn’t have music playing when ur trying to talk.
Music blasting
Why did you not finish the video
Please do an installation process for the same dash cam on a Toyota camry XSE 2020 , i had the same one since 7 months and I couldn’t find a professional dude to trust in. Pls pls sir 😢😢😢😢 , hopefully you mention me if you going to do it
Good video. I love this camera. I'm a dash cam installer in Vancouver. cam-on.ca My customers are all happy with this camera.
Awesome video with annoying background sound.
Lots of parts left over. Should I throw away the duo cam?
NO YOU DONT GIVE IT AWAY YOU CHARGE FOR THE HARDWIRE KIT
We give away the installation kit with the purchase.
@@DASHOTO how is that? the camera is $249 you add the hardwiring kit it jumps to $259
@@bull5919 The installation kit and hardwiring kit are two different things. The hardwiring kit cost is $10 by itself, but we throw in the extra installation accessories e.g. add a fuses, circuit tester, cleaning tools
@@DASHOTO oh ok didn't see that
@@bull5919 No problem! We understand it's a bit confusing :) but the installation accessories included are huge help, and add an extra layer of protection.
Не покупайте этот ВР
Съёмка в сумерки и ночью полное мыло.
Звук тихий с шумом и треском.
Купил в Рашке в офф.магазе и теперь жалею.
На 4 PDA почитайте про это ВР последние посты и все станет понятно
Jesus, shake the camera more
Horrible install video
Viofo dash cam is last sh*t - I had two and both are defect after no a year (one after 6 month). Front camera doesn't work, rear camera records only in black/white, no upgrade is possible... For such one poor quality it's too expensive, actually it's a no go for anywhere priced products. Especially there is no support from Viofo team!
I defenitly don't recommend this Product (and manufacturer)!
Is a real piece of shit - going defect
Turn Off this disgusting Music!
You lost me when the fuse box appeared....
Thank you for taking the time to create these video explanations.
I am wondering why it seems we are stuck with seemingly only two choices: wire our dash cam to the car battery, or buy an expensive external battery.
1.) Could a battery used by off-grid/camper van enthusiasts be a good choice to run a dash cam, e.g., the Yeti or the Jackery?
2.) CURIOUS: How does the dash cam know when to engage Parking Mode if it is powered from an external battery, e.g., the Viofo A129 Pro Duo plugged into the Cellink Neo? Or is that functionality lost with the Cellink Neo and the like?
If the dash cam is not connected to the car's ignition at all, it will not be able to use parking mode.