Wheels Manufacturing 386evo Bottom Bracket Fitting Guide
ฝัง
- เผยแพร่เมื่อ 7 ก.ย. 2024
- Wheels Manufacturing 386evo Bottom Bracket Fitting Guide If you find the videos helpful and would like to make a small donation to help support the channel you can do so here www.paypal.com...
Buy Me A Coffee
www.buymeacoff...
Support the channel via the Patreon Page for early video access
/ freetocycle
Follow me on Instagram
www.instagram....
info@freetocycle.co.uk
Thanks for watching.
Your TH-cam videos are the best. Best tecnic
I just got a frame with one of these in there already. It has GXP sized bearings and I need shimano. Do I have to buy a whole new BB or can I knock the old bearings out and the new ones in to the existing BB? Thanks!
EDIT: To anyone interested in the answer. You can reuse the BB shell and replace the bearings. The OD is 37 and the ID (For shimano is 24mm). The bearings you need for the shimano conversion are two MRA2437 LLB (or 2RS). They will be 24x37x7mm, can be had for about $15-20USD each. Hope that helps!
Love the video! Thank you!
Thank you ❤
Thanks.. subbed
Nice one 👍
Greetings from spain
Excellent as always, thank you
Cheers
I’ve fitted one of these BBs to my bike and it’s creaking on every pedal stroke. I didn’t torque it to 35nm as I was concerned about crushing the carbon bb shell on the bike. Just wondering if I’m being too cautious and if you can advise how tight it too tight? If its useful bike is a giant propel. Thank you!
How are you getting on since the accident
Can you assist me please? I am just about to fit a the same Wheels Manufacturing 366EVO BB which is designed to take a 24mm Shimano Crankset. Is it ok for me to use the FSA Adapters which I removed from the original 386EVO press fit bracket on the Wheels BB? If so, can you confirm that I can do away with the spacers which come with the Wheels BB?
If you can help me it will be much appreciated.
Thanks in advance.
Does the BB need to be faced when using a this type of wheels manufacturing bb with a lip? won't it creak or click if it's not faced?
Wouldnt hurt, that is if its steal or aluminum.
This will fit into a threaded frame? Or is it for press fit. Also the diameter looks bigger. This won't fit in bsa square taper frames?
No. It is only meant for a bike with a press fit bottom bracket. In this case the BB386 designation. Some like time bikes refer to it as PF BB386. Which means PRESS FIT BB386.
Refer to your manual or online references to verify what bottom bracket your frame uses.
Is bb386 the same as bb86? Im trying to find this bb to install using a shimano crankset. The bb the bike currently has is a shimano 72-41. What bb does it use if its that?
BB86 uses the 24mm axle, BB386evo uses a 30mm axle or 24 with adapters! So you would need the BB86 for the Shimano crankset!
@@FreeToCycle thank you
@@FreeToCycleheya! saw this comment and wanted to ask something
currently have a bb386evo with a 30mm crankset but want to change for a 24mm crankset
are adapters (30mm to 24mm reducers) fine to use? or should i buy a bb386 specced for a 24mm crankset
@@niconico9702 best is to get the same wheels manufacturing BB for a 24mm crank