MR04 EV02 8500KV AAA Setup | Kyosho Class - Group B
ฝัง
- เผยแพร่เมื่อ 28 ส.ค. 2024
- We have Kyosho Class! Checkout ILR-Reunion under Racing Classes, Group B here:
sites.google.c...
If you have Mini-Z, old or new, bring it! We’ll put you in a class.
I intentionally made this MR04 EVO slower with Kyosho 30 tires in the front so that I can enjoy driving the car and making it steer using the car's body roll. This kind of reminds me of the PN70 Class we have back in the days (2008) where I would even put a coin in the roof (inside the body) to make the car "roll" a bit and get traction using Kyosho tires. Anyway, I'm hoping we can get this Kyosho Mini-Z MR0/MA0 Chassis back in because it's super simple to tune and drive. No need to do anything to the tires other than using a tire tape and you're set!
For reference on lap times:
RX28 2500KV LiPo Jomurema KS1042: 8.09
MR04 8500KV AAA Jomurema KS1042: 8.25
MR04 8500KV AAA Audi R8 LMS Kyosho 30: 8.40
MR04 5600KV AAA McLaren 12C GT3 Kyosho 30: 8.83
MR04 Setup List:
MR04 Kyosho Front Yellow Springs
MR04 Kyosho -1 Toe Bar
Refex Racing 0.5mm wheel shims
PN F1 19mm +1.5 offset wheels
Kyosho 30 Low Height tires
PN Balance Weight (T-Plate holder)
PN #4 T-plate Carbon
PN 94-98mm Motor Mount v4 (MR3311AK)
www.kenonhobby...
PN Disc Damper Set with top disc, green spring
Kyosho Ball Diff/Stock Spur
Kyosho 8T Pinion
5g wheel weight in front of motor
Kyosho Audi R8 LMS
Kyosho/PN Steel Hex Screws
PN F1 19mm +3 offset wheels
Gekko Soft Tires (GKM-015-S) nexx-racing-pr...
😮 great channel. Just what I was looking for.
Appreciate that, thanks! I also post pictures and comments in my TH-cam Community Page if you like to check that out. 👍
@@tjaymacRC cool
Thank you for showing the setup of your mr04! I am wondering how do you shim the front knuckle top arm to prevent PN rim from rubbing it? Where do you actually put the shim on sir? 1:36sec
No shims. I showed that I shaved/sanded down the edge of the upper arm to prevent it from hitting the PN wheels.
@tjaymacRC thank you sir! You are my mini-z idols! Like your clean fast and consistent driving!
you can also get a Lexan roof for the 12c.
Thank you! Its finally in stock! Pick a couple up for my 2500KV LiPo car.
Last question to ask you sir, not necessary to use the top shock & spring?
All depends on the setup. I suggest to start with PN Tplate #4 without top shock. Just use PN Disc Damper set. I personally don’t like to use top shock on MR04 because its top heavy.
@tjaymacRC you are the best! Do u use any silicone grease on the PN disc damper? Pls do advice the oil thickness if any. And which colour spring do u use for bottom and top? Wish to copy exact setup as ur mr04 as my starting base setup. Have a nice blessing day ahead sir.
Thanks. I use Kyosho Gear Diff Grease #5000 on top only. For the springs, I'm using NEXX Racing soft springs because its what I have. If I have PN, I would use PN's soft springs. I don't preload the springs too much so that the rear can return to center asap. All depends on the track and driving but on my current MR04, this is my setup.
You can try mpower steering seat😊
Lost me. Not sure what that is.
Hey TJay know you said top disc green spring just try figure out whether you ment ftom the bottom green spring disc, damper, top disc or ? I know this is a straigh forward question and self explanatory
Oh I’m only running 1 spring (green) and 1 disc, on top only. No spring, no disc in the bottom.
Ok will give it a go sorry for being a basic question thanks
@@bazmack4697 Not basic question at all, no worries. Ask anytime. 👍
Ok done as you said so it's right if it's a very loose rear end
@@bazmack4697 Sorry, I’m not sure if you’re telling me or asking me something here. I also don’t remember saying something about loose rearend.
why don't you use Marka tyres? you will become faster, front v5 25, post v1 10
Thank you. I run Marka rears and PN KS fronts on all of my race kit cars. The MR04 I bought it just to drive around the track but still be able to play around with the 2500KV LiPo cars running cheaper tires without traction roll (understeers).