Really good video, we work a lot with DALI and you nailed it. By the way, Lutron released a notice that from now on, the LQSE-2DAL has been discontinued and now its something like LQSE-2DALUNV which need HWQS ver 15.1.
Well this time you need to check the programming video 😅 👉🏾How to Program DALI Light on a Lutron Homeworks Lighting Control System - DALI Addressing - NEW 2024 th-cam.com/video/WXfV1B95NYs/w-d-xo.html
what about zone numbers (Zone# column)? Are they importatnt when you assign loads to a loop? I always thought that zone number coresponds to DALI group number and has to be unique ? Is Zone Name alone enough to ensure that you won't end up with mixed up circuts (becase they will have the same zone number in different rooms)?
Good point! Zone name is automatically assigned to a zone #, this happens behind the scenes (that’s why I chose not to display that zone # column in the video, because no changes are needed there). Any zone name within a room has to be unique. So once you create your Dali zone and add the number of addressable driver to it and then assign that zone to the correct loop it is wired to, you good. I’ll post a dali programming video next week so stay tuned ✌🏾
on your video you are showing the wiring example for different zones on one loop on T-Tap connection. shouldn't the wiring be looped from driver 1 to 30 on daisy connection and the last connection be to the DALI module?
my question is, say in 1 loop you have 15 discovered Dali driver in a specific area, how do you map out specific DALI driver/fixture (i.e fixture #13) to match with the database fixture 13 you entered?
That’s a very good question! You would that when addressing the Dali drivers (from the addressing screen). This screen will allow you to flash the drivers one by one which you will do until you find the one you want. Then, you will assign it to the one you want in your list of drivers. Voila ✌🏾
![Future Automation Ghost Wired Panel for Lutron HomeWorks - Specification & Full Panel Build [NEW]](http://i.ytimg.com/vi/-nu2Y-BtrhQ/mqdefault.jpg)
![How to Design a Lutron Homeworks QSX System // Complete System Design Package [New] (June 2022)](/img/n.gif)
Other than anything else...I adore your laughing in intervals 😊
😂😂 that’s making me giggle 🤭 Thanks for the kind words 🙏🏾
Really good video, we work a lot with DALI and you nailed it. By the way, Lutron released a notice that from now on, the LQSE-2DAL has been discontinued and now its something like LQSE-2DALUNV which need HWQS ver 15.1.
Your videos are amazing and super helpful. I'm learning a lot from you. Thank you
You’re very welcome! Glad it helps
What's the difference between dali and ecosystem?
This video is very important for me thank a lot Xavier
You’re very welcome 😊👍🏾👍🏾
Thanks for the video Xavier, very clear, and instructive. Indeed this information is so important.
Thanks 🙏🏾 Andres
Great video. How do you address the dali drivers?
Well this time you need to check the programming video 😅
👉🏾How to Program DALI Light on a Lutron Homeworks Lighting Control System - DALI Addressing - NEW 2024
th-cam.com/video/WXfV1B95NYs/w-d-xo.html
What 24v dali drivers do u like for 24v hi output and multi channel products. I have some large ceiling coves
Great video. I would like to see one with DMX control.
Yes me too! I’m working on it! Thanks for your message!
Amazing content as usual!
Thanks 🙏🏾🙏🏾
have a question if the LED driver output is max. 48VDC, LED rating should also be 48VDC? Thank you!
Do you have a wiring diagram of the wiring going from the Dali Lutron module to the light fixture and also what is the recommended wire?
This is shown at the beginning of the video isn’t it? Wiring depends on lengths etc. Best to Google for full cable specs
thank you for this. For the Lutron RA2 system, do we need the fitting to have Dali?
No RA2 Sélect is not DALI compatible
Awesome video as usual. What design software do you use for your floor plans?
Thanks 🙏🏾. I use Microsoft Visio
Awesome content
Thanks !
Thank you for informative video. Is there Dali controller for RadioRa3?
I don’t think there is - we don’t have RA3 in Europe yet
Any idea how to get trained on Dali please?
Good question! I don’t know 🤷🏾♂️ that’s why I’m trying to share what I know on this channel. More to come on Dali, DMX install and program ✌🏾
what about zone numbers (Zone# column)? Are they importatnt when you assign loads to a loop? I always thought that zone number coresponds to DALI group number and has to be unique ? Is Zone Name alone enough to ensure that you won't end up with mixed up circuts (becase they will have the same zone number in different rooms)?
Good point! Zone name is automatically assigned to a zone #, this happens behind the scenes (that’s why I chose not to display that zone # column in the video, because no changes are needed there). Any zone name within a room has to be unique. So once you create your Dali zone and add the number of addressable driver to it and then assign that zone to the correct loop it is wired to, you good. I’ll post a dali programming video next week so stay tuned ✌🏾
on your video you are showing the wiring example for different zones on one loop on T-Tap connection. shouldn't the wiring be looped from driver 1 to 30 on daisy connection and the last connection be to the DALI module?
DALI is topology free
Hello Bro very good presentation can you make a video that design QP -2L Athena Edge Processor ? and about athena design software if there is
Hey bro I’d love to and will do once someone help me getting the kit
my question is, say in 1 loop you have 15 discovered Dali driver in a specific area, how do you map out specific DALI driver/fixture (i.e fixture #13) to match with the database fixture 13 you entered?
That’s a very good question! You would that when addressing the Dali drivers (from the addressing screen). This screen will allow you to flash the drivers one by one which you will do until you find the one you want. Then, you will assign it to the one you want in your list of drivers. Voila ✌🏾
Tres interesting
Merci!
Please share tutorials for Dali
There are plenty on the channel!
can I use Energi Savr Node app to program a DALI module?
Yes but only in a ESN application. In an HomeWorks application you must use lutron designer software
@@adelux Thanks for your quick reply!
Tel me about ACR area control for lighting control?
What would you like to know ?
Thanks
You’re welcome 👍🏾
J’ai pas compris la phase de commisioning ?
Cette vidéo est plus axée sur le design. J’en prépare une nouvelle avec le commissioning du DALI…. Très bientôt
We used Dali with cooper lightening co based uk product is better .