วีดีโอ

Glad you liked it! 👍🏾

Glad you enjoyed it 👍🏾🙏🏾

Yes sure you can!

Merci beaucoup 🙏🏾👍🏾

Great! 👍🏾 glad to hear the video helped. Enjoy your RA2 select system ✨

Please expand your question ✌🏾

@@adeluxif you have lights in a room a fair distance away from the control panel you would obviously need to switch them locally, but you do not cover this!

Thank you for your input. I believe I mentioned Dali drivers have to powered separately from the distribution panel

@@adelux still doesn’t answer my question!

Sorry what’s your question exactly? I can only see « ! » in your comments no « ? »

Thanks Paul 🙏🏾

Thanks 🙏🏾

Yes would love too! I need to find a way to get the kits to do so as I’m based in the UK and don’t have Ketra here yet!

Thank you for your nice feedback and kind words 🙏🏾

Hi, I would suspect a loss on the communication from the lutron cable here. Try to re-address the module. If that fails check your communication cable ✌🏾

Ho well…that’s an occupancy sensor! 😅 also depends on what kind of room it’s fitted in …..couple of things though….while a room is occupied, if you change the light levels (from button or app) the light should stay where they are until you exit the room. Try that ✌🏾

@@adelux I actually need the light to stay on without anyone present in the room.

Thank you very much 🙏🏾

Correct!

Thank you very much for your kind words 🙏🏾

Hi, I could and would do just need to get the savant kit!

Hi thanks for your comment! Well you know really a pico is a pico, meaning it’s basically a remote to operate a power module. So yeah you could use pico ref: PJ2-3BRL-GWH-F01 which is a pico with fan control engraving. And that pico will remotely operate the Maestro RRD-2ANF-WH which is the fan control power module. Hope this helps ✌🏾

@@adelux thanks Xavier. Other questions the pico PJ2-4B-GIV-L21 works with the system RA02 select?

All you need to know 👉🏾www.lutron.com/en-US/products/pages/wholehomesystems/ra2select/components.aspx#?cat=PC1

@@adelux thanks for the información. Have a nice day

Thanks 🙏🏾

The drive inside remains the same but you can order replacement rollers with the width you want 👍🏾

@@adelux Thank you! Are they pricey to buy (this is for for home use) Or is it very possible to fabricate something?

You’ll have to get in touch with your local lutron rep

Yes just create a time clock where you enable / disable presence detectors based on time of day ✌🏾✌🏾

There you go 👉🏾 assets.lutron.com/a/documents/homeworks_international_system_architecture.pdf

@@adelux Thank you very much and may God bless you

Well this time you need to check the programming video 😅 👉🏾How to Program DALI Light on a Lutron Homeworks Lighting Control System - DALI Addressing - NEW 2024 th-cam.com/video/WXfV1B95NYs/w-d-xo.html

Correct! I mentioned that if not in this video then on the design video. As the installation is lutron related and they use the word “loop” on their module and documentation I had to use that same word to provide correct guidance when using their module. Again I agree with you Check out the DALI design video 👉🏾Lutron Homeworks QSX System Design with DALI Light Fittings // Adelux (NEW) [2022] th-cam.com/video/Xnyh__tQ9Ks/w-d-xo.html

Thanks Jeff for your feedback and kind words. Was great working on your project and team!

Thank you much appreciated 🙏🏾👍🏾

There are plenty on the channel!

There are plenty on the channel!

Thanks for your comment not sure I understand what you trying to find out? LED will be wired back to its Driver. Driver will be wired back to its dimmer. Hope this helps

Thanks for your comments🙏🏾 glad it helped a bit 👍🏾

You’re very welcome 😉 thanks

Been using dialux evo for years and results on site always been amazing. Thanks for your comments 🙏🏾

I sent you an email regarding meljacs and logic. Would love to hear your thoughts on it.

I’m sure it sets you apart when presenting a design. Being able to see the vision ahead of time definitely helps to bring that immersion to the client.

Dialux Evo

Thank you very much 🙏🏾👍🏾

I wish I can do a full series on RA3 but it’s not available in the UK where I’m based. If someone in the US is interested to send some kit and work on a deal for production, I’m here 🙋🏾‍♂️

It’s definitely there. Did you check in the drop down list?

@@adelux i found that, it depends on project location I chose in project setting. US location not support Dali universal

Check with your local lutron rep ✌🏾

США

Hahahah well let us know how it went and which part of the video helped you? Also next time you can just hire me for that sort of commissioning - easy! 😎

What build are you on, 😂 same here

Hahaha thanks

Thanks 🙏🏾

Wow all the way from Brazil!!??? Glad you enjoyed it!

Lutron Designer

Glad it was helpful! thanks for your comment

Wow Maroc!! Un pays que jaime particulièrement!! 🙏🏾 merci pour le commentaire

Thank you so much! It was such a great experience to put it together - I’m glad you’ve found it useful 👍🏾

Hi, Q-Design is for Lutron Quantum not lutron Homeworks

Hi, thanks for your message. My best word of advice would be for you to get in touch with a local lutron specialist. Good luck

Ca depends de la version….le mieux serait de se rapprocher d’un professionnel Lutron local ou d’appeler le tech support de Lutron 👍🏾

There so many features to cover! That’s definitely an idea for the future. If you have some insight or want to share with others, feel free to comment below. Surely that will be helpful for others ✌🏾

This is what we would prefer to program. We wouldn't want the lights to go off automatically from the PIR if they were already set to a scene in the first place, i.e. you would set a scene for the evening and expect it to stay on regardless of any motion activation. That said, this method for determining whether the PIR should activate based on no lighting being on is neat and requires less programming steps than we would normally use