I've been waiting patiently for this, I did my R60 ALL4 clutch off the garage floor couple years ago and I can attest that it's a pain in the ass, I didn't put mine into front end service mode, dropped the sub-frame out instead and disconnected the prop shaft at the transfer case. Great job Kevin.
Kevin i can't believe how much quick and responsible you are !! You are probably the most popular and responsible mechanic in great Britain !! I suppose you are Liverpool fan !! Only Liverpool FC!!
Extremely helpful! I'm doing the turbo, timing chain, head gaskets, and clutch on a bargain 2013 R60 I picked up. I literally could not have done it without this video.
Bonsoir Kevin-Albert Williams. Vous avez du mérite, la Mini est très bien réalisé comme conception, la moindre mécanique démonter toute la voiture incroyable.
The video came in very handy!! It also shows how pro you must be! Doing this with Jack stands in the driveway?! I had a hell of a time and I took the whole front off and had a lift 😆 also I feel like you made several parts look a lot easier than it really ought to be lol. Great video! I subbed just to see more stuff like this!
I replaced a snappped rear sway bar and links on a golf mk5 2005 on Saturday. The heat and the rusty bolts nearly killed me. Only ever did one clutch. Mitshubishi galant whilst it was snowing. Never touched a clutch again. Something satisfying about watching this fella work.
I think you have great business and I want to see you succeed. You do this all on the ground which in a challenge in itself. To me it looks like you're good at what you do and fast at it. Keep up the good work and keep releasing the awesome content for us.
Holy crap, the amount of work to replace the clutch is way more than I expected. I'm gonna have to take it to a mechanic because I just don't have the patience for that.
Really enjoy watching your videos, I work alot on cars myself, Got a cosworth myself, And i do hate to replace the clutch and such on that thing but i do it in a garage. So its nothing compared to your work!
By heck mammoth job! I bet when they rang up you cringed when told it was 4wd!!!! I take my hat off to you doing that job 🎩 As ever Kev, your a master at your work 🙏👍🏻
I've got to do one of those soon you normally make job's look simple 😩 I'm half way through sorting a diesel one with a camb chain failure engine out full strip etc the prop shaft was difficult and the transfer box doesn't seem to come out until the gearbox is loose I was hoping to find a easy way to go with the next one 😢
Another great job kevin, have just inherited the wifes 2016 countryman reckon the clutch is getting fairly close as well!!, damn shame your not closer to margate!!.
Can someone please tell me what that piece is hes using to those 2 pieces together at 49:29? Also is he just spraying water on the clutch and inside the transmission to clean out excess?
Great video.... the bolt at 16:58... I missed that and fought with transmission for 2 hrs before I realized that bolt was there! ughh. Should have been paying attention...
Awesome camera work! Thanks for the effort! I’ll be doing this soon, it’s nice to know what you’re getting into. Looks helpful to remove the front end but not necessarily? Im surprised you didn’t replace the main seal while you were in there
Lots of work on this car. Lots to disassemble. When do you show us how to replace the clutch on a Citroen C5 ? I understand it's 7 hours of work. I know you replaced the clutches on the Citroen C5. Thanks king Kevin ! Thanks teacher Kevin !
I am doing one of these now. Clutch came with an instruction sheet indicating special tools are needed to install the self adjusting clutch or the clutch wont work correctly. I take it you had no problems afterward?
Good afternoon Kevin, I hope you are enjoying this sunny day. This will be my evening viewing, I bet this mini was a job and a half to do being all wheel drive
Hey there thanks for the video. I too am having to replace the clutch in my R61 paceman. I have gottan everything apart and bolts removed inorder to separate the bell housing from the engine just as you did in the video. My question to you Kevin is im having a hell of a time seperating the bell housing. I have the engine supported by a floor jack and im positive that all bolts are removed. How did you do it so easily. I know the bell housing has 2 dowels for alignment up top. I am struggling here. Any advice would be greatly appreciated. Thank you.
did you use any special tools? the one in the middle of the pressure plate and disc is just a centering tool right? You didnt have to do anything with the self adjusting mechanism? currently just did this job and car wont go into gear with clutch to the floor, it will roll slightly when i try and force it into first gear like its not disengaging the pressure plate.
it never ceases to amaze me how far BMW will go to make everything that typically goes wrong so incredibly impossible to get to. They have absolutely no consideration for maintenance except to hope you take it to the dealer and pay a small fortune for them to get more gray hair. It must be part of their business model. Great video but I think I will sell my Mini before the clutch goes :)
What a great job well done properly I salute you, I'm sure taking it to a garage that would cost you an arm and a leg just for labour. Do you know how to do the wishbones on this car does it involve dropping the subframe as well like the older models to get access to the 2 bolts hidden at the top of the end bush or you can simply do them from the bottom of the subframe, thanks?
I have a Kia Ceed 1.0. It’s only done 16,000 miles and I’m the second owner. The clutch doesn’t slip or drag, but it’s jerky when you release the pedal after changing gear, mainly from first to second. If you don’t release it really slowly it’s hard not to induce a slight jerk. It’s hard to be smooth around town because of this. Could it need a new clutch? No idea how the previous owner drove it. A friend mentioned the torque springs on the clutch could be worn. Would appreciate your thoughts.
@@WMCS thanks for your reply. Out of interest why does lack of driving affect the pressure plate springs? The car is three years old and 16,000 miles. Thanks.
Ciao from Italy i have an audi a3 1.6 tdi 105hp cay from 2012 with start stop. You can tell me if I have a single or dual mass flywheel?? Thanks good job
I'm 7 months late to the comment party, but dayum you are brave and a masochist. I ran a mobile repair service for several years,and I specifically didn't do jobs that required pulling engines and transmissions (I got talked into the odd clutch on Subaru or little pickup truck here and there, just because they are easy) just because they are such a PITA outside of a shop with a lift. Good on ya, and if I had to guess, you've got a good enough niche for it to be a successful enterprise. Gotta do the clutch in my wife's car (same thing as this vid) and no matter how many other cars I've done the same job on, it's great to see the specific model done beforehand, because damn does mini love making repairs into puzzles.
you should take a look at the little trolley the pakistani mechanics are using when removing the gearboxes ==> link here : th-cam.com/video/dcJoCar5hYU/w-d-xo.html
That was a serious amount of dismantling for the Mini-can't believe how patient you were, still getting the perfect camera angles
Thank you.
I've been waiting patiently for this, I did my R60 ALL4 clutch off the garage floor couple years ago and I can attest that it's a pain in the ass, I didn't put mine into front end service mode, dropped the sub-frame out instead and disconnected the prop shaft at the transfer case. Great job Kevin.
Kevin i can't believe how much quick and responsible you are !! You are probably the most popular and responsible mechanic in great Britain !! I suppose you are Liverpool fan !! Only Liverpool FC!!
Extremely helpful! I'm doing the turbo, timing chain, head gaskets, and clutch on a bargain 2013 R60 I picked up. I literally could not have done it without this video.
Thank you so much for sharing this! Saving me sooo much time on the clutch change!
Thankyou so much for the kind gesture. It’s been well received and very much appreciated
i’m thinking about buying one with 106k miles, is it a good idea? it probably still has the oem clutch.
The best mechanic in UK !
Thanks for sharing !
Respect king Kevin !
Bonsoir Kevin-Albert Williams. Vous avez du mérite, la Mini est très bien réalisé comme conception, la moindre mécanique démonter toute la voiture incroyable.
Just got this job before closing shop tonight. This video will be immensely helpful in the morning! Thank you so much!
No probs. Let us know how it goes down and if the videos came in handy.
The video came in very handy!! It also shows how pro you must be! Doing this with Jack stands in the driveway?! I had a hell of a time and I took the whole front off and had a lift 😆 also I feel like you made several parts look a lot easier than it really ought to be lol. Great video! I subbed just to see more stuff like this!
I replaced a snappped rear sway bar and links on a golf mk5 2005 on Saturday. The heat and the rusty bolts nearly killed me. Only ever did one clutch. Mitshubishi galant whilst it was snowing. Never touched a clutch again. Something satisfying about watching this fella work.
I think you have great business and I want to see you succeed. You do this all on the ground which in a challenge in itself. To me it looks like you're good at what you do and fast at it. Keep up the good work and keep releasing the awesome content for us.
Thank you.
Holy crap, the amount of work to replace the clutch is way more than I expected. I'm gonna have to take it to a mechanic because I just don't have the patience for that.
That’s some serious dismantling just for a clutch, well done especially in this heat 👍👍👍👍👍👍👍
Really enjoy watching your videos, I work alot on cars myself, Got a cosworth myself, And i do hate to replace the clutch and such on that thing but i do it in a garage. So its nothing compared to your work!
By heck mammoth job! I bet when they rang up you cringed when told it was 4wd!!!! I take my hat off to you doing that job 🎩 As ever Kev, your a master at your work 🙏👍🏻
I've got to do one of those soon you normally make job's look simple 😩 I'm half way through sorting a diesel one with a camb chain failure engine out full strip etc the prop shaft was difficult and the transfer box doesn't seem to come out until the gearbox is loose I was hoping to find a easy way to go with the next one 😢
Another great job kevin, have just inherited the wifes 2016 countryman reckon the clutch is getting fairly close as well!!, damn shame your not closer to margate!!.
Can someone please tell me what that piece is hes using to those 2 pieces together at 49:29? Also is he just spraying water on the clutch and inside the transmission to clean out excess?
Job and a half doing a clutch on a mini 😲 you make it look easy 😂😂😂👍👍
Excellent Kevin lad 👍👍👍
Andy thank you 🍻🍻🍻
Wow, that looked like a massive ballache to get to! Nice job!
These are the cars you need to Clutch up - massive profits here - keep Safe and clutching Kevin
Appreciate the feedback… it’s definitely worth getting out of bed for …
Good customers
Great video.... the bolt at 16:58... I missed that and fought with transmission for 2 hrs before I realized that bolt was there! ughh. Should have been paying attention...
Awesome camera work! Thanks for the effort! I’ll be doing this soon, it’s nice to know what you’re getting into. Looks helpful to remove the front end but not necessarily? Im surprised you didn’t replace the main seal while you were in there
Lots of work on this car.
Lots to disassemble.
When do you show us how to replace the clutch on a Citroen C5 ?
I understand it's 7 hours of work.
I know you replaced the clutches on the Citroen C5.
Thanks king Kevin !
Thanks teacher Kevin !
Watching from Canberra Australia. Big job mate, I just did the clutch on my td4 06 Freelander and I thought that was hard lol. Hat off to you dude.
Thanks mate. Really appreciate the feedback.
There’s a TD4 on the channel. Let me know your feedback
The first person i see working on youtube.
I am doing one of these now. Clutch came with an instruction sheet indicating special tools are needed to install the self adjusting clutch or the clutch wont work correctly. I take it you had no problems afterward?
Este si se merece su me encanta x que va paso a paso no como otros que cortan el video
Good afternoon Kevin, I hope you are enjoying this sunny day. This will be my evening viewing, I bet this mini was a job and a half to do being all wheel drive
Hey Phil.. definitely enjoying the day before getting baked next week 🍻🍻🍻
Hey there thanks for the video. I too am having to replace the clutch in my R61 paceman. I have gottan everything apart and bolts removed inorder to separate the bell housing from the engine just as you did in the video. My question to you Kevin is im having a hell of a time seperating the bell housing. I have the engine supported by a floor jack and im positive that all bolts are removed. How did you do it so easily. I know the bell housing has 2 dowels for alignment up top. I am struggling here. Any advice would be greatly appreciated. Thank you.
Great work! So much work to change clutch. Thank you for the share Bro ☺️🙏
Thankyou.
Thanks for posting, very helpful as I’m doing one tomorrow cheers pale
è un piacere vedere le tue mani muoversi con tanta maestria lavorare scomodo come lavori tu non è da tutti un ti seguo sempre saluto Gianni
how always friend Albert !! excellent work you do! greetings from Mexico!!
How much to change a mark 1 kuga clutch please
did you use any special tools? the one in the middle of the pressure plate and disc is just a centering tool right? You didnt have to do anything with the self adjusting mechanism? currently just did this job and car wont go into gear with clutch to the floor, it will roll slightly when i try and force it into first gear like its not disengaging the pressure plate.
You need to bleed the hydraulic system.
@WMCS did that already but will try again, thanks!
Приветствую вас Кевин! Удачи вам процветаний канала! 👍👏💪
Wow, job and a half! Bet you had enough parts left over after putting it all back together to build another mini!
lol 🍻🍻🍻
it never ceases to amaze me how far BMW will go to make everything that typically goes wrong so incredibly impossible to get to. They have absolutely no consideration for maintenance except to hope you take it to the dealer and pay a small fortune for them to get more gray hair. It must be part of their business model. Great video but I think I will sell my Mini before the clutch goes :)
Kevin you have iron nerves, all these plastics, fenders, cables, admiration
There’s so much of them
What a great job well done properly I salute you, I'm sure taking it to a garage that would cost you an arm and a leg just for labour.
Do you know how to do the wishbones on this car does it involve dropping the subframe as well like the older models to get access to the 2 bolts hidden at the top of the end bush or you can simply do them from the bottom of the subframe, thanks?
Thanks for the feedback
How did u get the transfer box and the gears box back in all toehyher ?
As seen in the video. Just wiggle the spline in ., slowly slowly
Hello Kevin, what are the easiest and fastest cars to repair?
Which models do you prefer?
Thanks for the videos
The mad lad did it on the 4WD mini
It was a bit involved that one ….🍻☀️
Hi did you had to take the subframe out? And why did you take the front bumper out?
?
I have a Kia Ceed 1.0. It’s only done 16,000 miles and I’m the second owner. The clutch doesn’t slip or drag, but it’s jerky when you release the pedal after changing gear, mainly from first to second. If you don’t release it really slowly it’s hard not to induce a slight jerk. It’s hard to be smooth around town because of this. Could it need a new clutch? No idea how the previous owner drove it. A friend mentioned the torque springs on the clutch could be worn.
Would appreciate your thoughts.
My thoughts are the pressure plate springs are at a fault due to lack of driving.
New clutch for sure will remedy the issue.
@@WMCS thanks for your reply. Out of interest why does lack of driving affect the pressure plate springs? The car is three years old and 16,000 miles. Thanks.
Excellent video! Do you do service call to Wisconsin,USA? How heavy was the tranny?My 2015 Mini all4 needs clutch,not sure its a diy job.Thankyou
Hello ! Great work, can I ask how long it took you ? Thank you for sharing
Ciao from Italy i have an audi a3 1.6 tdi 105hp cay from 2012 with start stop. You can tell me if I have a single or dual mass flywheel??
Thanks good job
Ворог усіх автосервісів👍💪👌
Apparently the mini cooper is a mass car for you in England, but it is very bad for work, congratulations again.
I'm 7 months late to the comment party, but dayum you are brave and a masochist. I ran a mobile repair service for several years,and I specifically didn't do jobs that required pulling engines and transmissions (I got talked into the odd clutch on Subaru or little pickup truck here and there, just because they are easy) just because they are such a PITA outside of a shop with a lift. Good on ya, and if I had to guess, you've got a good enough niche for it to be a successful enterprise. Gotta do the clutch in my wife's car (same thing as this vid) and no matter how many other cars I've done the same job on, it's great to see the specific model done beforehand, because damn does mini love making repairs into puzzles.
Thanks for the feedback. Really means a lot coming from a fellow mechanic. I’m sure it’ll go well .,, only advise is go for the full VALEO Kit.
Great video Kevin, top job done as always
Thanks Rico
total respect sir!
i was wondering what should a clutch job cost a 2011 mini s turbo clubman cost?
It all depends. If you need a price send over your details
www.williamsmobileclutch.co.uk
Excellent work. Don't suppose you could film doing a 2.0 TSI Scirocco if you have any?
Gracias bro
Approximately, how many fixes do you use to make in a day?
Have you ever encountered stuck driveshafts in the gearbox? If so, how do you deal with them?
Not as of yet mate.
@@WMCS th-cam.com/video/-KFabO3-1C8/w-d-xo.html
Excellent video, thanks for posting!
Did this job take any special tools?
Grande,ingamba davvero bravo....
These vids are awesome 😎😎
Viel Arbeit. Tolles Video 👍
Its a case of removing the car from the clutch instead of removing clutch from the car.
😁😆
thank you Kevin 🙏✌️🍻🍻
Muy bueno.. es verdad que hay algunos mini con el motor PSA, ya sabes , Citroën / Peugeot? 👏👏👏👏
Hello from Serbia💪💪💪
That is a major op, not for the faint-hearted.
Beau travail 💪🇲🇦
Question is: engeneering komplete garbage or smart :-)
Great work.
outstanding, and thumbs up from me👍
Thanks max. See you tomorrow 🍻☀️
@@WMCS thanks kevin 👍
Mate get the gen 2 mid torque milwaukee perfect for clutches
Have you got a link pls.
@@WMCS www.eurocarparts.com/p/milwaukee-m18-fuel-mid-torque-1-2-gen2-impact-wrench-kit-881nm-MIL478451?gclid=CjwKCAjwruSHBhAtEiwA_qCppjZCI_RZah_8mDAAQ3Wg6NWw3mKBWtsh1yIcLycStDlv1WEb-eEvBRoC5FoQAvD_BwE
no time for coffee or tea ehh kid lollol great work as always
That’s it mate … 😁🍻
Gute Arbeit.
Sehr viel Arbeit.Hast dir das Wochenende verdient 👍🍺
That was a challenge!
Sure was Matt.
Hello from Russia! Очень большая работа!
Helloo st R 🍻🍻🍻
it's not easy to remember what went where I suppose
moin, sehr hilfreich
잘 보고 가요
KEVINNN❤️
👍👍👍👍👍👍👍👍👍
The STIG of car repairs
you should take a look at the little trolley the pakistani mechanics are using when removing the gearboxes ==> link here : th-cam.com/video/dcJoCar5hYU/w-d-xo.html
Good job on the mistake of engeneering !
Come to USA please
need 2 days to replace the clutch
this mess! A car like that, I directly set it on fire!
I don't give a shit in the hands of the one who designed this car
hey
hyper complique cette mini faut tout démonter !!! ma conçu cette voiture
E BRAVO l inglese .............. non si tagliano i passa-ruota ..............
Oh lord they come in 4WD lol that's bad
respect from france ,speed joob
👍👍👍