Thanks to some of your tips, I finally won my first sugarloaf toy. I've never gotten to play a sugarloaf machine until today and on my 3rd try I got a cute polka dot Llama. I used my angles! thanks matt! hope I can meet you someday!
Just a note. Don't turn electric motors attached to electronic circuits, it's really bad since turning a mother can create electricity and send it back into the circuit where it might damage components that shouldn't have and electricity flowing backwards through them. That's why you always hold your pc fans when you flow the dust out of your pc to avoid having the motors spin and possibly harming the circuits.
hey Matt I just got a claw machine it's an older model and everything was working fine till yesterday. I pressed the drop claw button and it went down but won't go up and it makes this nasty sound like the motors messed up. do you know what's wrong with it?
Hey Matt I'm buying a claw machine and I need some help. How much do you think a used large (2 times the size of yours) working clean sweep claw should cost. Please help me with this. Thanks!
BenRobots Not sure, sometimes you can get them for a few hundred bucks if someone really wants to get rid of one, but generally I see those for anywhere from $500 to $700 for the bigger machines.. good luck!
BenRobots is it a double claw clean sweep or a single player large? Does it work or does it need work. what is its appearance? are their scratches does it have bill validator? theirs so much to add up. but any where from $75-$2500 some places will sell you completely new/refurbished with warranties. Some will refurbish it where they replace even scratched sides or glass where you get a new-old machine.
+MadSativa it's a single player machine without a bill acceptor, in pretty new condition, minor nicks and scratches. Also, they are not giving a warranties but they will give phone support. They are asking $500 I may ask lower. Thanks for the help.
BenRobots Biggest factors are condition and location. On the east coast, a fully working Clean Sweep claw machine typically runs around $500 (especially one with a bill acceptor). Phone support is usually code for we will never answer your call... Ask for $400 and if they say no, ask if they can throw in free plush. I've found in the past when someone is getting rid of a machine, they want to get rid of any left over plushes as well.
thats about normal price, always try to talk them down or get free plush if not then yo still have to buy plush to play your machine prior to putting it on location.BenRobots
Hi there Matt, do you know how to replace claws on claw machines? I have recently bought an Elaut Candy Man claw machine on eBay & the claw is too small for many of the small prizes I have!
dude u did it backwards although it may work it reduces the lifespan of the rope and it almost messed up my motor by doing this method as the rope unwinded going the other way i believe. Go clockwise not counterclockwise when u first tie a knot on the top near the wheel turner.
To bad yer not closer to me. I want to buff some of the parts that are starting to not be shiney. xD I want to get a claw machine but pinball machine repairs and cleanings has all my money tied up. :(
Hello myself. So I have a claw machine now. Now I need help with finding a manual for my Treasure Chest Claw Machine which I think might be made by Coast to Coast?
Matt thanks for teaching me the claw I was at Walmart today and this lamas head was over the prize shot and I aimed for the head and he almost went in then I aimed to the bottom and got him hen I realized I got a 2 in 1 when I picked it up a minion fell in I was like omg!!! So I just wanted to say thanks for teaching me about the claw I am now really good at the claw so just a big thank you 😀😀😀 🐪🐪🐪🐪🐪🐪🐪lamas rule a blue lama I won it was a sugar loaf btw I'm going to make a claw machine out of emojis -------------🔭 🐪 |______|
That intro song is the snazziest thing I've ever heard
matt ur the best youtuber in the universe
MATT! GUESS WHAT HAPPENED ABOUT 2 WEEKS AGO. I USED YOUR TECHNIQUES AND I GOT A 2 IN 1!!!! :) YAY! AND TODAY I GOT A PRIZE ON MY FIRST TRY!!!! :D
Thanks to some of your tips, I finally won my first sugarloaf toy. I've never gotten to play a sugarloaf machine until today and on my 3rd try I got a cute polka dot Llama. I used my angles! thanks matt! hope I can meet you someday!
matt your the best youtuber in the world
"you're"
*you're
Sharon Chiang Aw well thanks! You're too kind!! :D
+Matt3756 your the best
I so agree😊
Do you have any videos how to change the coil?
This was the best instruction video I've seen. Thank you
great job
I love your videos I watch all of your video
Just a note. Don't turn electric motors attached to electronic circuits, it's really bad since turning a mother can create electricity and send it back into the circuit where it might damage components that shouldn't have and electricity flowing backwards through them. That's why you always hold your pc fans when you flow the dust out of your pc to avoid having the motors spin and possibly harming the circuits.
Matt your are so awesome. You inspire me I play claw machines and check them out. Keep it up.
Your the best matt
You are the best keep on going very good videos best in this planet
Hi Matt i am your biggest fan
CANADIAN THUNDERSTORMS! HO, HO, HO!
when you do that, does it make the drop longer?
Thanks, I have an old Greyhound Skill Crane and the cord was wound incorrectly. This worked perfect.
Thx for the great video,we all learn tips and tricks of you matt😀
Well done for 400,000
love the videos man
I love your channel
love your videos. just subscribed.
your videos are awesome
I love you matt great vid
Thxs this helped a lot
Best clawer in the world matt 3756
Awesome Matt!
Hello I was wondering how I can change the decals around my claw machine
Hey Matt luv ur vids
hey Matt I just got a claw machine it's an older model and everything was working fine till yesterday. I pressed the drop claw button and it went down but won't go up and it makes this nasty sound like the motors messed up. do you know what's wrong with it?
How do you know how long to make it? Where can you get replacement string?
Matt you are my favorite youtube can you do 1 on how to replace gears on a claw machine i might get a claw machine :))
Wow, i never knew thats how the claw knew that it has dropped and hit the prizes. Pretty clever.
SMOOTH AS A SAILOR!!!!
Aqolloz LOLZ!
im such a fan
i watch all of your videos to become a better person at the claw machine
cool matt !
Have you made the house video yet and when should it be uploaded by??
Hey Matt I'm buying a claw machine and I need some help.
How much do you think a used large (2 times the size of yours) working clean sweep claw should cost.
Please help me with this.
Thanks!
BenRobots Not sure, sometimes you can get them for a few hundred bucks if someone really wants to get rid of one, but generally I see those for anywhere from $500 to $700 for the bigger machines.. good luck!
BenRobots is it a double claw clean sweep or a single player large? Does it work or does it need work. what is its appearance? are their scratches does it have bill validator? theirs so much to add up. but any where from $75-$2500 some places will sell you completely new/refurbished with warranties. Some will refurbish it where they replace even scratched sides or glass where you get a new-old machine.
+MadSativa it's a single player machine without a bill acceptor, in pretty new condition, minor nicks and scratches. Also, they are not giving a warranties but they will give phone support. They are asking $500 I may ask lower.
Thanks for the help.
BenRobots Biggest factors are condition and location. On the east coast, a fully working Clean Sweep claw machine typically runs around $500 (especially one with a bill acceptor). Phone support is usually code for we will never answer your call... Ask for $400 and if they say no, ask if they can throw in free plush. I've found in the past when someone is getting rid of a machine, they want to get rid of any left over plushes as well.
thats about normal price, always try to talk them down or get free plush if not then yo still have to buy plush to play your machine prior to putting it on location.BenRobots
very informative video....
hey matt your getting a GOOOBER TOOBERS COOBERS GOOBERS
Hello
In My claw machine ,claw is not going up.can you help please?
How do I un wide it cause mine won’t 😢
matt im such a big fan pls lets be friends and reply it will make my day you are the best stay cool make more vids :)
You're *
+MikeTheGiraffe there were no grammar errors dumbass
One question how does the machine know if the claw drop is too short or too long? Is it censored?
HEY MATT PUT YOUR MEGA ELUAT CLAW MACHINE FOR A MEET AND GREET AUCTION.
Question: My claw goes down but unravels and doesn't come back up.
Matt how I can plug the claw into a cable
Matt I know this is old but is there any way to talk to you about my machine? I have this machine but it’s old. Thanks. Been watching for years :)
When be the giveaway
Do a full video on drop zone or big bass wheel pleeeeeeeeeeeeeeeeease
do a full arcade nerd review on the yahtzee arcade game
I love your videos
Hi
will you be doing another matts mail soon.I like to see what people send you.
8 people dislike because they don't own a machine. HATERZZZ
Hi Matt, is the claw made from alluminium or some other metal?
hi matt!!!!!
Incredible!!
where do you buy machines EBay?
Were did you buy your claw machine at? I want to try and save up and get one :) Thanks Matt.
matt greetings from mexico a question few stuffed animals have in your collection?
SW2 should tell the claw to stop coming up not going down
Hey matt how long do you make your strings for the claw?
Yay good minecraft vid bro
Matt you are cool 😎
Hi there Matt, do you know how to replace claws on claw machines? I have recently bought an Elaut Candy Man claw machine on eBay & the claw is too small for many of the small prizes I have!
🤣5 years Later u know it for sure!
@@xCandy yeah course I do now, I was like 14 when I wrote that comment and I didn’t know anything then 😂😂
More claw repair videos would be awesome!!!!
#clawrepair101
dude u did it backwards although it may work it reduces the lifespan of the rope and it almost messed up my motor by doing this method as the rope unwinded going the other way i believe. Go clockwise not counterclockwise when u first tie a knot on the top near the wheel turner.
That is cool
do more vids on ur new machine!!
Cameron murphy/gaither Got a bunch coming soon! Thanks!
awesome!!! :)
+Matt3756 I don't really watch your videos but I seen some of them and there cool so I subscribed
I live in Missouri
Its not a dip switch. Its a tac(tile) switch
FINALLY
Matt can I have a set of headphones I will send a self stress stampted envelope
bring it around town !! spongebob said XD
i was going to do this but my claw doesn't have scraws it one pice :(
MrClawking what do you mean its missing a screw or the screw is messed up?
that's cool
I won a frozen dog tag from the walmart claw game today first try.
U look like Pete wentz from fall out boy
Matt can yov make a video of Matt gets mail fronteras yov ✉
Cool
Bro it won't let me join the Contest
I so agree by the way this is me watching matt😂📲
cool
Matt what's up
To bad yer not closer to me.
I want to buff some of the parts that are starting to not be shiney. xD
I want to get a claw machine but pinball machine repairs and cleanings has all my money tied up. :(
Hello myself.
So I have a claw machine now.
Now I need help with finding a manual for my Treasure Chest Claw Machine which I think might be made by Coast to Coast?
Yay
how many of us actually have a claw machine?
You should put your cat in a claw machine and try to win
Epic
Wow
Matt thanks for teaching me the claw I was at Walmart today and this lamas head was over the prize shot and I aimed for the head and he almost went in then I aimed to the bottom and got him hen I realized I got a 2 in 1 when I picked it up a minion fell in I was like omg!!! So I just wanted to say thanks for teaching me about the claw I am now really good at the claw so just a big thank you 😀😀😀 🐪🐪🐪🐪🐪🐪🐪lamas rule a blue lama I won it was a sugar loaf btw I'm going to make a claw machine out of emojis
-------------🔭
🐪
|______|
Pls reply dis
Matt I just wanted to say a big thank you
Those are camels...
its a solenoid!
do matt's mail please. i sent you a letter that should be there.
hey
How to Basic parody?😜😜
Hi
hi
👌🏻
lol its smooth sailing not smooth sailor
too complicated, probably easier to make a complicated rifle to shoot
0 comments WTF?
I matt