Press Forming Metal With 3D Printed Plastic Tooling

แชร์
ฝัง
  • เผยแพร่เมื่อ 16 พ.ย. 2024

ความคิดเห็น • 26

  • @daleyarrow5358
    @daleyarrow5358 8 หลายเดือนก่อน +2

    I do enjoy a good side quest! The unexpected plastic metal press was a bonus! MORE BEEF REQUIRED!

    • @JustAnotherMakerChannel
      @JustAnotherMakerChannel  8 หลายเดือนก่อน

      More beef indeed, I suppose 1kg of plastic is still cheaper than a £70 arbor press, so I can add a lot of material!

  • @Somun-a
    @Somun-a 2 หลายเดือนก่อน +1

    You may not have a arbor press but I am guessing you have a vise? You can design and print jaw extensions that you can use as your tool.

    • @JustAnotherMakerChannel
      @JustAnotherMakerChannel  2 หลายเดือนก่อน

      I do have a vice! And even though I moved out 9 years ago I still haven’t moved it my leaky garage, but that’s a different issue, a vice would be the perfect choice.

  • @katierobinson5399
    @katierobinson5399 8 หลายเดือนก่อน +1

    Love a good side quest 👌

  • @kieren7763
    @kieren7763 4 หลายเดือนก่อน

    I would use a bolt to go inside the yet to be formed loop/circle area area and a mandrel bender style hinge to wrap around the bolt on the same axis so the metal will wrap around the bolt as it swings around look up mandrel bender for an example. then make a 3d printed stamp to get the steps in it . That metal also looks like stainless and is harder to form as it wont stretch well and will have lots of spring back try aluminium a non hardening version is a good place to start

  • @AugustoCoelhoHenriques
    @AugustoCoelhoHenriques 8 หลายเดือนก่อน +1

    i believe that your plastic pieces has a deforming factor greater than metal so dispite your theory about scale is corret you need a better deforming factor material, in first stage you can easily bend the metal sheet because is not plastic that is deforming it but that metal rod.
    If you apply 90% plastic but just the tip of some metal you can achieve better results i believe

    • @JustAnotherMakerChannel
      @JustAnotherMakerChannel  8 หลายเดือนก่อน

      Great information, I certainly need to read more about metal forming!

  • @gedr7664
    @gedr7664 8 หลายเดือนก่อน +1

    so cool! good work

  • @smorris12
    @smorris12 12 วันที่ผ่านมา

    Stage 2 requires stage 1 to be a larger radius so there is material to fold in. Otherwise you'd have to be pushing more of the tail in, as per the original design

  • @Duraltia
    @Duraltia 8 หลายเดือนก่อน +2

    @07:00 Classic... Imagine doing your CAD on like a 77" Screen like I occasionally do which totally ruins ANY and ALL sense of scale of a part 🤣

  • @messerschmidtfpv4419
    @messerschmidtfpv4419 8 หลายเดือนก่อน +1

    Does a Part 3 for the Hexapod comes? with Controller Control?

    • @JustAnotherMakerChannel
      @JustAnotherMakerChannel  8 หลายเดือนก่อน +1

      It’s somewhere on my big list of videos, I seem to add more to the list than I can keep up with!

    • @messerschmidtfpv4419
      @messerschmidtfpv4419 8 หลายเดือนก่อน +1

      @@JustAnotherMakerChannel Have you seen the code with an PCA9685? (Part1)

    • @JustAnotherMakerChannel
      @JustAnotherMakerChannel  8 หลายเดือนก่อน +1

      @messerschmidtfpv4419 I think I actually have one of those somewhere, or maybe I just looked at them, it would definitely be a better way to go, I might remake the hexapod a to be a little bit more physically robust and use a PCA9685

  • @AndrossUT
    @AndrossUT 8 หลายเดือนก่อน

    You know you might be able to finish the hinge roll by using the 180 bend jig first and also giving the "sharp" end a

    • @JustAnotherMakerChannel
      @JustAnotherMakerChannel  8 หลายเดือนก่อน

      I think the end of your comment might be missing? Were you going to say use the first concept after the 180 bend?

  • @AngelDLM08
    @AngelDLM08 8 หลายเดือนก่อน +1

    Interesting to see strength and durability comparsion with eSUN ePLA-CF, they claim 15-20% carbon fibers, while Bambu makes PLA-CF and PETG-CF 5%, and only PA6-CF, PAHT-CF (PA12) and PET-CF is probably 15% (MSDS says 12-20%)
    Printed some parts with Bambu PLA-CF 5% and I'm disappointed, it negligible stiffer than eSUN PLA+ but doubles the price and will wear AMS unit faster

    • @JustAnotherMakerChannel
      @JustAnotherMakerChannel  8 หลายเดือนก่อน

      I think when I manage to get a more robust process I might try some material comparisons, all of the green parts were done in Bambu PETG and the black tooling was a generic ABS that’s around 2 years old, but prints very well!

  • @Moonrakerd
    @Moonrakerd 8 หลายเดือนก่อน +1

    Id say cast the tools out of pewter

    • @JustAnotherMakerChannel
      @JustAnotherMakerChannel  8 หลายเดือนก่อน

      I haven’t done any pewter casting before, is it tricky? I’ve done a few lead weights in the past.

    • @Moonrakerd
      @Moonrakerd 8 หลายเดือนก่อน

      @@JustAnotherMakerChannel looks easy enough, I bought some and the solder heater, but havent tried much yet :))

    • @JustAnotherMakerChannel
      @JustAnotherMakerChannel  8 หลายเดือนก่อน

      Thanks for the tip I might give it a try :)