I just managed to get the battery out! Jippiii !!! The battery had swollen up. so it did not come out if you pull on the cable. but it works with a thin knife (and rust remover to make it slippy) and a nail polish remover ( to dissolve glue) slowly with small movements, the knife slips along the battery. and I always dripped some nail polish remover. At some point I was able to move the battery to the left and right. and then it came out.
Just replaced mine. Agreed that the tools that come with the one on Amazon are useless. Battery was really tough to get out (accidentally slightly punctured mine, be careful!), what worked for me was using some olive oil on a butter knife and sliding it on each side of the battery, then using a small wooden dowel and a hammer to gently nudge it out from the other end. Have it all put back together and it's working great now!
Man, you are a lifesaver, my battery was so stuck that I ripped off the cable. My first thought was to forget it and throw it away because maybe the battery will explode in my hands... then I found your solution, so I used a Stainless Steel Locksmith Padlock Lock Picks and brought tiny drops of oil around the battery. Then I let it rest for a day and now and then I tried to go around with the tool. The next day I opened the other side, where you can see the battery, and pushed it out with a piece of metal with a flat head...outside on my balcony to be safe.... and the battery came out very easily oh and to have an unobstructed view of the battery I had to remove the 4 screws of the on of the switch, take out a small white jumper and you can push it outside
WORTH REATING: "VERY IMPORTANT...You need to remove the 5 screws first to remove the side case cover!" The person on the video skips this part at 1:43. The cap/end doesn't magically come off without removing those screws.
Getting the battery out is not as simple as it looks. There's some kind of adhesive or sticky stuff inside of there. You have to wiggle the battery back and forth slowly pull it up it is actually a pain in the butt.
I put two chopsticks (flat side as not to puncture it) from the other side. They fit snug right through the wiring to touch the back of the battery. I banged the sticks at the same time gently to nudge it out. Once half way I was able to pull it out with my hands. Old battery looked expanded, possibly because of over heating. I put in the new battery minus the foam buffers so it wasn’t so snug. Seems to be working fine.
So I buy the speaker and I have to buy extra batteries because after half a year will start to fail and will not hold the charge. And all this you have to discover it after changing your speakers three times. But they don’t tell you nothing, not even in the reviews. 🙄 I’m not buying JBL speakers again.
I'm actually surprised I don't see more comments like this. This is exactly what I was thinking as I was looking up how to replace the battery just to realize it's a common problem. Not exactly a great deal to pay about $100 for a speaker that sounds great but will die in less than a year.
This guy never showed how to removed the old one, obviously was Not that easy to removed, i damaged My power flex cable in the process, now all i have is a useless piece of crap
great instructions. Thanks for sharing this. For those complaining that its difficult to get the old battery out. That happens depending on how much and if the old battery is swollen up. Mine was "really" stuck but no problem to get out. The battery is not as wide as the slot so you can get down either side with little hook tools and pull the bugger out.
To remove the battery, open the opposite end and push the battery out with an allen key that is small enough to fit behind the charge port but large enough to give you support to push with instead of pulling on the wires or whatever other ideas of using a knife or corkscrew.
Brilliant idea bud!!! Obviously some of these 1 dimensional !d!ot$ never heard of improvisation when doing repair work. That's why it's better to leave R/R (remove/replace) work to those with a fully functional BRAIN!!!!
Thanks for posting this! I was able to replace the battery in mine based on the info in this video combined with various comments. It would have been nice if the video showed you how to get the old battery out, though (hence why I had to go to the comments as well). That shit was a bitch and a half, but the good news is that I didn't burn myself, start a fire, cause the battery to explode, or cause any non-cosmetic damage to my speaker (that I know of, so far. I have yet to charge it up all the way and test it. Just finished. Only turned it on long enough to make sure it powers on and plays sound. Going to charge it when I get home in a little bit and see how long it lasts before it dies after it is fully charged, but so far so good)
my battery was so stuck that I ripped off the cable. My first thought was to forget it and throw it away because maybe the battery would explode in my hands... then I found your solution, so I used a thin piece of metal (Stainless Steel Locksmith Padlock Lock Pick) and brought tiny drops of oil around the battery. Then I let it rest for a day and then I tried to go around with the tool. The next day I opened the other side, where you can see the battery, and pushed it out with a piece of metal with a flat head...outside on my balcony to be safe.... and the battery came out very easily oh and to have an unobstructed view of the battery I had to remove the 4 screws of the on of the switch, take out a small white jumper and you can push it outside
Amigo, intenté sacar la batería, pero está muy atorada hinchada, y además tiene como residuos de pegamento derretido... el caso es que no he podido sacar la batería vieja del compartimento. Que me recomienda para sacarla o disolver ese pegamento?? Gracias
Replace the battery with great effort because it was swollen. The flip 4 works without a battery plugged into the charger? I am afraid I have damaged a circuit and want to test it before buying a new battery.
OMG! Thank you so Much! By the way, do you know what could be the issue if the speakers sometimes sound like crunching? I have a 6 months old JBL Flip 4, but the battery doesn't last, so that's one problem, and I suppose that this video will help me with that, and the other problem is that crunchy sound that sometimes makes while playing Thank you very much Broh, your awesome One last question, does this make it not water resistant anymore?
Taking the old, probably swollen, battery out is incredibly hard and potentially dangerous. This video doesn’t show it to trick you into believing it’s really easy and sell you the battery. If you saw what you need to do, you just wouldn’t even try.
Yes, this works!! Just did it. Wear safety glasses and gloves just in case. Mine was on a full charge and it didnt explode... at your own risk, as they say. But yes,,,, it does work. The sticky substance makes it hard, not impossible.
Wow! 👍 Thanks for the Info! I've been using my flip 4 in the cup holder on my bike and strapped to my paddleboard in saltwater for over a year! It has been Fantastic little 🔊for me, especially paying $20 for it slightly used... Recently it started shutting down within 10 minutes! So I contemplated buying a new speaker thinking mine was worn out... But decided to buy this battery instead, after watching this video I thought it would be a piece of 🎂... As you can see in the video the battery was already removed, so it had already been opened! After reading the comments here I went to the Dollar Tree and purchased 1) Eye glass screw drivers 2)Safety glasses 3)Gloves 4)Corkscrew 5)coconut oil! The video is on point all the way to battery removal witch they didn't show... I used a sharp knife and went down all 4 sides of the battery to detach the adhesive and pulled the wires until they ripped out! Then I put my dollar store gloves and glasses on as recommended on this board and proceeded to screw the corkscrew into the battery about 3/4 in! I pulled and rocked side to side regrouping a couple times and finally broke loose! New battery slipped right in... Make sure you fold the wires to the center of the battery so it's not covering the screw hole for the cover... Put a dap of coconut oil on each screw and screw hole and it went together like butter! Grand total $26 and my flip 4 is better than new! Hope this helps and Thank you for corkscrew advice! I would have never thought of that! Cheers Bobby
Look at your old battery and look at your new battery are the two black wires on the opposite side on the new battery then they are in your old one if they are you need to switch them or cut them in Spiceland I know it's b******* I've had to do it twice already two of my friends speakers
If you're having trouble removing the defective battery, i suggest carefully drilling a hole on the bottom side of the plastic battery housing (careful not to drill into battery). You can then stick a screwdriver in there and push the battery out with some force.
I found that pulling it by the wires and using the assistance of a very small screwdriver on the opposite side of the wires will eventually get the battery to come loose. You do have to work it, though, .... by moving the battery around as you pull. But good idea on the drilling technique.
You need to make your website more accessible for regular customers who want to buy one thing only, why do you have to go through all this registration and application acception bullshit. Was about to buy a battery from you but I'll just find somewhere else now. Thanks for the tutorial though.
Take note- I saw a video of someone taking out the battery and broke it. There was this one comment stating that you can actually remove the other side to push it out. But what I did was a little different- I also removed the USB charger (or connector) so it moves out of the way, then with an acrylic-wooden chopstick (recommended to use a metal rod instead lol) and a hammer, I carefully hammered it out of the Flip 4. Beware of the white cable while hammering it out as you may break the wire. *Also do note of the speakers magnetism, I literally scratched the diaphragm q.q Anyone has recommendations for me to replace my speaker diaphragm?* Take these steps cautiously, then replace the battery. It should be working fine like wine once you got it right. Though careful when you hammer it out- hammer it softly and consistently so that you don't have an exploding battery in front of you.
@@lookatme.3794 I would do it, but I already repaired it and I'm not going to buy another battery, lol Figure out a way on how to hammer down the battery with some sort of makeshift chisel (i used a screwdriver because fuck it) and hammer it down. Takes a bit of time, but if you don't rush it, it definitely can come out without a scratch.
Impossible to remove the battery on my device. The battery is sealed with glue and is immersed in solid foam. It seems that every unit of this speaker is differently designed inside.
Estoy leyendo los comentarios y viendo el video ya que tengo está bocina y últimamente la carga de la misma no es ni de una hora por tanto sustituire está batería. Yo la compré en allispress.
I just opened mine with a normal thin table knife. my flip is so old and cooked, the internal tape is totally rotten. to a great new life with new batt
This video makes everybody believe it's an easy porcess so just buy the battery from them and and do the job in 5 minutes. Well, it's true: dismounting the case is relatively easy. What it does not show at all is the removal of the old battery. I replaced the battery in my son's JBL flip4 - removing the old battery was a nightmare I can tell you. The original old battery is nested into a soft spongue-like plastic which is very sticky. The whole thing is pushed into its very tight place in the case. Grabbing the disconnected cabling and pulling out was not successful: the cable torn out and I couldn't even grab the stucked battery to pull it out. I tried picking out with a screwdriver and with a knife - YOU DON'T DO THAT, IT'S DANGEROUS: THE METAL TOOL SHORTCUTS THE BATTERY WHICH HEATS UP IN A SECOND AND CAN CAUSE FIRE!!! At the end I removed the round case cover with the "!" sign on the other end of the case, removed the connector block and carefully pushed out the old battery with an appropriate non-conductor stick like a pencil. This video is much more useful, it shows you this process too. th-cam.com/video/8ucO1hbS9kY/w-d-xo.html
(RUS) Еле достал аккумулятор из колонки.... Я сделал так: вкрутил в аккумулятор саморез и тянул за него плоскогубцами (ENG) I barely got the battery out of the column .... I did it like this: I screwed the screw into the battery and pulled it with pliers
My JBL Flip 4 not only had 5 screws around the cap but also they were plastic soft and I could only unscrew 3 of them and got blocked with 2. Ok I got pissed because I am sure it was meant to be shitty screws so people won't have an easy time replacing the battery in it. But what shocked was that the battery was glued inside after I destroyed the cap to get in it just to see if it will be possible to replace it. JBL made it on purpose like that I am sure. What we see here in these teardowns does not reflect reality. I literally paid for a battery and I couldn't replace it...
Goodness me, a lot of work, plus you have to buy the battery (which won't be as good as the original). Think I would be better off just to buy a new speaker...
Finally removed the battery 🔋 , tried to disassemble but couldn’t. Wiggles the wire , then wire came off. I could smell fumes , after hour decided to use cork screw with eye glass , mask 😷, gloves and towel. Luckily it didn’t explode , even with cork screw I had to use a lot of force to pull out the battery 🔋 😎👍
Make sure your battery charge is dead, deader than dead even.... I put on gloves and safety glasses... and I used a corkscrew.. and it worked flawless. AT your own risk. Puncturing a lithium/ion battery is dangerous. Thats why Im saying I did it this way, and not, that you should... but... short of corkscrew, you need a device that can grab it to pull it out... The upside... once i replaced my battery in my flip... it is now better than it was new!!!! No joke. Need a tutorial vid from start to finish... maybe i make....
Guys i did it but it was pretty hard. Thank you for the help :) Now it’s better then ever before ✌️. But i have one problem. Why the speaker is turing on by it self?
im unsure. I do think that there is a reset function... like holding power button for 30 seconds or some such thing... mine did it too. then i did the reboot thing... thats on you tube as well i believe/ where i saw it
Hello, I would like to remove a question. I bought a battery like this for my Flip4 and it made the exchange, but after installation when turning on the box I found that the battery level was very low with the red led flashing. I wonder if it is normal for the battery to come without any charge? Thank you very much in advance.
Every battery purchased requires at least 4-8 hours charge time before first operation, I imagine it has something to do with the shipping of a charged battery
I always loved my jbl until now. I’ve had it for maybe a year and haven’t over used it. The battery won’t fully charge (even though it shows full charge) and when I use it, the battery lasts maybe 15 minutes. This looks like a long process and I’d rather just buy a new speaker. probably won’t be another jbl if they are known for this problem
Mujhe kripya Karke yah bataiye ki yah battery online Se Kaise mangaye kahan Milte Kaise magade Koi link to do mujhe bhi battery replacement karni hai per Kaise yah bataiye please
I had the same problem. Its cause the battery is dead. It needs to be replaced. The battery that you need to replace your flip 4 with is: www.amazon.com/gp/product/B07CZCFGTB/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1 There are videos on you tube that show how to dismantle the flip 4... remove your battery with extreme caution if you are going to do it in any way shape or form that damages the battery, ie, a corkscrew... (like i did). I got away with it... but i wouldn't recommend. Batteries tend to explode upon puncture... at least make sure there is no charge left at all....
yo tengo una pregunta , haber si alguien me ayuda ...yo lo cargo al flip 4 y en un minuto parece que esta en el 4to nivel y le cargo las 3 horas que me ha dicho el vendedor pero nunca llega al 5to nivel y se apaga como que ya esta cargado total pero lo enciendo y lo conecto a bluetooth y se descarga en 10 a 15 minutos y parparea el color rojo , que puede ser , alguien que me ayude por favor ..saludos
Edison farez cumbe Si, hermano, eso es la batteria por que yo tengo el mismo problema. Entiende este video y comprar las partes para abrir el jbl speaker.
@@Memo07Rex si lo compre , solo estoy esperando y seguir con el proceso de cambiar y que vuelva a sonar bien , ya estare escribiendo haber como me va , gracias por todo y saludos desde ECUADOR
Dimensions and how many cells the battery has would be extremely helpful. I'd say this information is downright necessary unless you want to be limited to that one brand of battery.
if your going to make a video, you should do it properly and show ALL THE STEPS!!!!! There are several screws on the battery side exterior panel that have to be removed before the video shows him simply twisting it off. These panels seem to be affixed to the case, mine was a bitch to remove AFTER getting the screws off. It broke partially in two. I will have to super glue it together before putting it back on. Then the battery has already been removed so he doesn't show how difficult and tight the battery is inside to get out.
I love the speaker,but you literally need to use all your hand strength for about a half hour to get these damn screws out. You also have too fidget with this thing over and over...just to put it back together again correctly. It was NOT easy,and i wont be buying this speaker again
Do these flip4 comes without battery? Lol...show us how to remove battery inside the flip4...
reverse the video ;)
Magic no battery 🔋 inside 😂
@@07acuratl15 ha ha ha
I just managed to get the battery out!
Jippiii !!!
The battery had swollen up. so it did not come out if you pull on the cable. but it works with a thin knife (and rust remover to make it slippy) and a nail polish remover (
to dissolve glue) slowly with small movements, the knife slips along the battery. and I always dripped some nail polish remover. At some point I was able to move the battery to the left and right. and then it came out.
Be careful with a knife - there is a ribbon cable at the bottom of the battery slot. Replaced mine successfully in struggle
Just replaced mine. Agreed that the tools that come with the one on Amazon are useless. Battery was really tough to get out (accidentally slightly punctured mine, be careful!), what worked for me was using some olive oil on a butter knife and sliding it on each side of the battery, then using a small wooden dowel and a hammer to gently nudge it out from the other end. Have it all put back together and it's working great now!
Man, you are a lifesaver, my battery was so stuck that I ripped off the cable. My first thought was to forget it and throw it away because maybe the battery will explode in my hands... then I found your solution, so I used a Stainless Steel Locksmith Padlock Lock Picks and brought tiny drops of oil around the battery. Then I let it rest for a day and now and then I tried to go around with the tool. The next day I opened the other side, where you can see the battery, and pushed it out with a piece of metal with a flat head...outside on my balcony to be safe.... and the battery came out very easily oh and to have an unobstructed view of the battery I had to remove the 4 screws of the on of the switch, take out a small white jumper and you can push it outside
WORTH REATING: "VERY IMPORTANT...You need to remove the 5 screws first to remove the side case cover!" The person on the video skips this part at 1:43. The cap/end doesn't magically come off without removing those screws.
Getting the battery out is not as simple as it looks. There's some kind of adhesive or sticky stuff inside of there. You have to wiggle the battery back and forth slowly pull it up it is actually a pain in the butt.
i would actually leave it to the professionals
Where can I buy a good battery for my jbl any tips
did you managed to pull it out eventually? mine is stucked... /:
@@ShayMor_Marketing it might be too late but, use isopropyl alcohol on the adhesive to remove it.
@@essentialtech388 i tried to drill it with partial success :) ill check your advice thanks
I put two chopsticks (flat side as not to puncture it) from the other side. They fit snug right through the wiring to touch the back of the battery. I banged the sticks at the same time gently to nudge it out. Once half way I was able to pull it out with my hands. Old battery looked expanded, possibly because of over heating. I put in the new battery minus the foam buffers so it wasn’t so snug. Seems to be working fine.
So I buy the speaker and I have to buy extra batteries because after half a year will start to fail and will not hold the charge. And all this you have to discover it after changing your speakers three times. But they don’t tell you nothing, not even in the reviews. 🙄 I’m not buying JBL speakers again.
Yeah, had to replace mine less than a year as well. The replacement battery lasted longer
I'm actually surprised I don't see more comments like this. This is exactly what I was thinking as I was looking up how to replace the battery just to realize it's a common problem. Not exactly a great deal to pay about $100 for a speaker that sounds great but will die in less than a year.
remember that with this battery replacement u will loose the waterproof seal so u cannot expose ur flip 4 to water after that
Yeah you can bud
@@travisscott2264 your slow
True
You won’t be able to get the old battery out. Don’t bother with this!!! Notice the video doesn’t show you that part!!!
Kevin Williams I mean I guess ur right
This guy never showed how to removed the old one, obviously was
Not that easy to removed, i damaged
My power flex cable in the process, now all i have is a useless piece of crap
You should looking for another tutorial before you doing it
Me too
Maybe you should have been more careful.
@@dpounder101 true sometimes things require force. And intelligence your right
Easiest thing i ever did on a speaker
great instructions. Thanks for sharing this.
For those complaining that its difficult to get the old battery out. That happens depending on how much and if the old battery is swollen up. Mine was "really" stuck but no problem to get out. The battery is not as wide as the slot so you can get down either side with little hook tools and pull the bugger out.
I just made it like you and almost destroyed my Speaker!! Never pull the battery from the cables!!
To remove the battery, open the opposite end and push the battery out with an allen key that is small enough to fit behind the charge port but large enough to give you support to push with instead of pulling on the wires or whatever other ideas of using a knife or corkscrew.
Brilliant idea bud!!! Obviously some of these 1 dimensional
!d!ot$ never heard of improvisation when doing repair work. That's why it's better to leave R/R (remove/replace) work to those with a fully functional BRAIN!!!!
This! Thank you for this!
Thank you for this suggestion. It was the only way I could get mine out.
What tool do you use to remove the face cover
Thanks for posting this! I was able to replace the battery in mine based on the info in this video combined with various comments. It would have been nice if the video showed you how to get the old battery out, though (hence why I had to go to the comments as well). That shit was a bitch and a half, but the good news is that I didn't burn myself, start a fire, cause the battery to explode, or cause any non-cosmetic damage to my speaker (that I know of, so far. I have yet to charge it up all the way and test it. Just finished. Only turned it on long enough to make sure it powers on and plays sound. Going to charge it when I get home in a little bit and see how long it lasts before it dies after it is fully charged, but so far so good)
my battery was so stuck that I ripped off the cable. My first thought was to forget it and throw it away because maybe the battery would explode in my hands... then I found your solution, so I used a thin piece of metal (Stainless Steel Locksmith Padlock Lock Pick) and brought tiny drops of oil around the battery. Then I let it rest for a day and then I tried to go around with the tool. The next day I opened the other side, where you can see the battery, and pushed it out with a piece of metal with a flat head...outside on my balcony to be safe.... and the battery came out very easily oh and to have an unobstructed view of the battery I had to remove the 4 screws of the on of the switch, take out a small white jumper and you can push it outside
Please make a video on how to bypass the battery and make it plug-in exclusively. Corded life!
Just don't buy a portable speaker then ._.
@@timoarrg Very practical solution :P
How did you place the spine back on?? I can't seem to get mine back on no matter how hard I try
Amigo, intenté sacar la batería, pero está muy atorada hinchada, y además tiene como residuos de pegamento derretido... el caso es que no he podido sacar la batería vieja del compartimento.
Que me recomienda para sacarla o disolver ese pegamento??
Gracias
Replace the battery with great effort because it was swollen.
The flip 4 works without a battery plugged into the charger?
I am afraid I have damaged a circuit and want to test it before buying a new battery.
OMG!
Thank you so Much!
By the way, do you know what could be the issue if the speakers sometimes sound like crunching?
I have a 6 months old JBL Flip 4, but the battery doesn't last, so that's one problem, and I suppose that this video will help me with that, and the other problem is that crunchy sound that sometimes makes while playing
Thank you very much Broh, your awesome
One last question, does this make it not water resistant anymore?
It makes that crunchy sound because of the battery life, after many uses, the battery is ''running'' out and you need to replace it, that's normal.
@@nghtryde8396 Thanks!
I was scared that maybe it was the speakers, that didn't work anymore
I have the same problem, just now I ordered this battery
Mine is doing this too and i'm here bc of this
Luis Angel Blancas Cruz where did you buy your battery ? Any tips on a good one
I understand that dunking the speaker in water is not a good idea but can it still be splash resistant?
Splash resistant should be fine
Taking the old, probably swollen, battery out is incredibly hard and potentially dangerous.
This video doesn’t show it to trick you into believing it’s really easy and sell you the battery. If you saw what you need to do, you just wouldn’t even try.
How did you pull out the old battery it's got all this sticky stuff all the way in
Angelo Thomathakis definitely not the safest way but the only way I could do it was to twist a cork screw into the battery and pull it out.
Does it work with the cork screw ???
Yes, this works!! Just did it. Wear safety glasses and gloves just in case. Mine was on a full charge and it didnt explode... at your own risk, as they say. But yes,,,, it does work. The sticky substance makes it hard, not impossible.
Wow! 👍 Thanks for the Info! I've been using my flip 4 in the cup holder on my bike and strapped to my paddleboard in saltwater for over a year!
It has been Fantastic little 🔊for me, especially paying $20 for it slightly used... Recently it started shutting down within 10 minutes! So I contemplated buying a new speaker thinking mine was worn out... But decided to buy this battery instead, after watching this video I thought it would be a piece of 🎂...
As you can see in the video the battery was already removed, so it had already been opened!
After reading the comments here I went to the Dollar Tree and purchased 1) Eye glass screw drivers 2)Safety glasses 3)Gloves 4)Corkscrew 5)coconut oil!
The video is on point all the way to battery removal witch they didn't show... I used a sharp knife and went down all 4 sides of the battery to detach the adhesive and pulled the wires until they ripped out!
Then I put my dollar store gloves and glasses on as recommended on this board and proceeded to screw the corkscrew into the battery about 3/4 in! I pulled and rocked side to side regrouping a couple times and finally broke loose! New battery slipped right in... Make sure you fold the wires to the center of the battery so it's not covering the screw hole for the cover... Put a dap of coconut oil on each screw and screw hole and it went together like butter! Grand total $26 and my flip 4 is better than new! Hope this helps and Thank you for corkscrew advice! I would have never thought of that!
Cheers Bobby
simba gambe
Just used your corkscrew method! It worked! 🔋 Heated up but didn't 💣!
Thank you ☺
Cheers Bobby
should i do a complete teardown on my flip 4 if there's something stuck in my aux port?
i replaced the battery and did everything right and the speaker doesn't turn on right or charge right. Rip...
It is probably the USB connector than. It gets more complicated at that point
Look at your old battery and look at your new battery are the two black wires on the opposite side on the new battery then they are in your old one if they are you need to switch them or cut them in Spiceland I know it's b******* I've had to do it twice already two of my friends speakers
great but anyone have an issue pairing with the new phones samsung s20fe???
VERY IMPORTANT...You need to remove the 5 screws first to remove the side case cover!
If you're having trouble removing the defective battery, i suggest carefully drilling a hole on the bottom side of the plastic battery housing (careful not to drill into battery). You can then stick a screwdriver in there and push the battery out with some force.
I found that pulling it by the wires and using the assistance of a very small screwdriver on the opposite side of the wires will eventually get the battery to come loose. You do have to work it, though, .... by moving the battery around as you pull. But good idea on the drilling technique.
Ohhh very easy..!! But how you take apart the old battery??
How long should I charge it the first time? and with what type of charger, in pc or with cell phone charger?
You guys all keep asking where can I get the battery, haven't any of you heard of Amazon that's where I bought mine
A one word answer of “Amazon” wouldn’t been just fine
and plz provide the link of battery frm where u have brought ? since my battery is died
this is more like a placement video
Lmao
Threw me off for a second lol
after replacing it, would it still be waterproof? or am I gonna put something like silicon to make it waterproof again?
Please aware that it could no longer be waterproof up to 3 feet
that's sad. I still want it to be waterproof. :(
Postovani
Da li moze da se ubaci baterija u blutut koja je jaca,ova moja radi svega sat vremena ,blutut nije original pretpostavljam
This is a misleading video - the battery compartment is shown to be empty. In reality, the old battery is glued in and very difficult to remove.
You need to make your website more accessible for regular customers who want to buy one thing only, why do you have to go through all this registration and application acception bullshit. Was about to buy a battery from you but I'll just find somewhere else now. Thanks for the tutorial though.
What did you use to open de speaker mask?
Hello, we have our own Cameron Sino Tool Kits Set, you can visit our website, thanks!
www.cameronsino.com/productdetail/CS-TOOLSKITS.html
Take note- I saw a video of someone taking out the battery and broke it. There was this one comment stating that you can actually remove the other side to push it out. But what I did was a little different- I also removed the USB charger (or connector) so it moves out of the way, then with an acrylic-wooden chopstick (recommended to use a metal rod instead lol) and a hammer, I carefully hammered it out of the Flip 4. Beware of the white cable while hammering it out as you may break the wire.
*Also do note of the speakers magnetism, I literally scratched the diaphragm q.q Anyone has recommendations for me to replace my speaker diaphragm?*
Take these steps cautiously, then replace the battery. It should be working fine like wine once you got it right. Though careful when you hammer it out- hammer it softly and consistently so that you don't have an exploding battery in front of you.
maybe i'm asking too much but if you can possibly make a video on how to do it i would be really thankful
@@lookatme.3794 I would do it, but I already repaired it and I'm not going to buy another battery, lol
Figure out a way on how to hammer down the battery with some sort of makeshift chisel (i used a screwdriver because fuck it) and hammer it down. Takes a bit of time, but if you don't rush it, it definitely can come out without a scratch.
@@Director1456 thanks man i hope it works ✌️
using a wooden spoon to push it through worked well for me
that surprisingly worked out really well lol, while i was hammering it out i was so scared of it blowing up on me
Where was the old battery my friend?
How's thw back-up
Impossible to remove the battery on my device. The battery is sealed with glue and is immersed in solid foam. It seems that every unit of this speaker is differently designed inside.
I did it! It was easy as hell. All you need is a tiny phillips head screwdriver. You can get the cover off easier with the screwdriver also.
Y la bateria vieja cuando la sacaste ??
I cant twist my end cap off, no matter how hard I twist it. I have the right model it just seems like its stuck. Help me please?
some have 5 screws u have to remove and then pry it off, others have the twist cap..... just look closely if yours have 5 screws design.
Hola amigo una pregunta donde compraste la batería y que costo tiene ?
Estoy leyendo los comentarios y viendo el video ya que tengo está bocina y últimamente la carga de la misma no es ni de una hora por tanto sustituire está batería. Yo la compré en allispress.
www.aliexpress.com/item/Cameron-Sino-3000mAh-Battery-GSP872693-01-for-JBL-Flip-4-Flip-4-Special-Edition/32890498055.html
Newpower99.com
Te vende el kit completo, incluyendo la herramienta por 45 dls.
Be careful when removing the battery. Mine caught on fire..
Just did mine last night, and my old battery caught on fire too! Haha Although I had to mangle it to get it out.
Same what shall I do like how shall I remove it
show!!! congratulations
Please help me how to replace a battery from AGARO Reloaded speaker.
I've seen some replacement batteries that are 4000mh rather than 3000 - anyone have any light to shed on that?
That just means it's a higher capacity battery that'll play longer before neefing a recharge.
My battery is stucked inside ,seems like it heated inside and kind of glued inplace ,any idea how to release it?
No hablo ingles por eso no entiendo los comentarios y no puedo responder sorry guys
I just opened mine with a normal thin table knife. my flip is so old and cooked, the internal tape is totally rotten. to a great new life with new batt
From where i can buy this battery in India?
Awesome! Thank you.
Thank you for your great support!
For more videos, please click the link below:
www.cameronsino.com/media.html?mediatype=video
How long is the battery suppose to last on full blast?
There is no data about the operate duration on full blast, the battery has 3000mAh capacity which lasts for a bit longer
endurance
Cameron Sino , wild guess? I feel my battery runs low pretty fast. So will it last the day with a new battery?
I want to change the battery for JBL flip4. Pls give me address of the shop. Thanks you
Hi. please send your enquiry to support@extrabatt.com
This video makes everybody believe it's an easy porcess so just buy the battery from them and and do the job in 5 minutes. Well, it's true: dismounting the case is relatively easy. What it does not show at all is the removal of the old battery. I replaced the battery in my son's JBL flip4 - removing the old battery was a nightmare I can tell you. The original old battery is nested into a soft spongue-like plastic which is very sticky. The whole thing is pushed into its very tight place in the case. Grabbing the disconnected cabling and pulling out was not successful: the cable torn out and I couldn't even grab the stucked battery to pull it out. I tried picking out with a screwdriver and with a knife - YOU DON'T DO THAT, IT'S DANGEROUS: THE METAL TOOL SHORTCUTS THE BATTERY WHICH HEATS UP IN A SECOND AND CAN CAUSE FIRE!!!
At the end I removed the round case cover with the "!" sign on the other end of the case, removed the connector block and carefully pushed out the old battery with an appropriate non-conductor stick like a pencil. This video is much more useful, it shows you this process too.
th-cam.com/video/8ucO1hbS9kY/w-d-xo.html
where can you buy the battery from ?
bestbattery.biz/index.php?option=com_csc&Itemid=2&cs=CS-JMF310SL&Gid=55392&gclid=Cj0KCQjwvLLZBRDrARIsADU6ojAhAt50tj9ue7wgm1EzFm4WOu6f65y7xgjOjMHZy57mTfo3sOk6D-oaAsA8EALw_wcB
appreciate it mate
www.amazon.com/gp/product/B07CZCFGTB/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
Where can you buy the battery from india
This CS-JMF310SL battery can be purchased here: www.mpfproducts.com/gsp872693-01-battery-for-jbl-flip-4-portable-bluetooth-speaker-3000mah/
(RUS) Еле достал аккумулятор из колонки.... Я сделал так: вкрутил в аккумулятор саморез и тянул за него плоскогубцами
(ENG) I barely got the battery out of the column .... I did it like this: I screwed the screw into the battery and pulled it with pliers
My JBL Flip 4 not only had 5 screws around the cap but also they were plastic soft and I could only unscrew 3 of them and got blocked with 2. Ok I got pissed because I am sure it was meant to be shitty screws so people won't have an easy time replacing the battery in it. But what shocked was that the battery was glued inside after I destroyed the cap to get in it just to see if it will be possible to replace it. JBL made it on purpose like that I am sure. What we see here in these teardowns does not reflect reality. I literally paid for a battery and I couldn't replace it...
What tool did you use to easily twist the side case cover off before filming this?
It's a clips
Donde puedo conseguir la batería del flip4
How many days going for come a battery from eBay
Battery was hard. Ripped off the wires. I got a short screw, drilled into the battery and yanked out with plyers.
Were you aware that your battery could have caught fire or exploded by doing that?
Yes had fire retardant gloves on and did it outside on concrete. Made sure there wasn't moisture in the air. But still it could've exploded.
From where i will get jbl flip 4 battery
aand how to remove the battery???
price and buying option
Goodness me, a lot of work, plus you have to buy the battery (which won't be as good as the original). Think I would be better off just to buy a new speaker...
Cameron Sino Battery? That is a lithium-ion battery but ok
Finally removed the battery 🔋 , tried to disassemble but couldn’t. Wiggles the wire , then wire came off. I could smell fumes , after hour decided to use cork screw with eye glass , mask 😷, gloves and towel. Luckily it didn’t explode , even with cork screw I had to use a lot of force to pull out the battery 🔋 😎👍
Pulled on the battery cord. Cord came off. Battery started smelling, so I put it out in the driveway and I'm out of $15.
Oil and a knife, to remove the old battery!! But be carefully
Guys pls help!! My old battery is stuck into the speaker can’t get it out bcuz of the glue inside. Any tips how to remove it?
Make sure your battery charge is dead, deader than dead even.... I put on gloves and safety glasses... and I used a corkscrew.. and it worked flawless. AT your own risk. Puncturing a lithium/ion battery is dangerous. Thats why Im saying I did it this way, and not, that you should... but... short of corkscrew, you need a device that can grab it to pull it out... The upside... once i replaced my battery in my flip... it is now better than it was new!!!! No joke. Need a tutorial vid from start to finish... maybe i make....
With a Corkscrew. It was for me the only way to get it out. It works. But on your own risk. Good luck.
Guys i did it but it was pretty hard. Thank you for the help :) Now it’s better then ever before ✌️. But i have one problem. Why the speaker is turing on by it self?
im unsure. I do think that there is a reset function... like holding power button for 30 seconds or some such thing... mine did it too. then i did the reboot thing... thats on you tube as well i believe/ where i saw it
SuperSportFitness Yea i did this but the problem didn’t goon :( Anyway its working perfect now. Thank you again ✌️
Hello, I would like to remove a question. I bought a battery like this for my Flip4 and it made the exchange, but after installation when turning on the box I found that the battery level was very low with the red led flashing. I wonder if it is normal for the battery to come without any charge? Thank you very much in advance.
Every battery purchased requires at least 4-8 hours charge time before first operation, I imagine it has something to do with the shipping of a charged battery
Make a JBL Charge 3 battery replacement video
What's the price for this battery?
Online (HKD): $298
20 bucks on Amazon.
This CS-JMF310SL battery can be purchased here: www.mpfproducts.com/gsp872693-01-battery-for-jbl-flip-4-portable-bluetooth-speaker-3000mah/
So we basically waste 20 or so dollars every year?
I always loved my jbl until now. I’ve had it for maybe a year and haven’t over used it. The battery won’t fully charge (even though it shows full charge) and when I use it, the battery lasts maybe 15 minutes. This looks like a long process and I’d rather just buy a new speaker. probably won’t be another jbl if they are known for this problem
Tengo el mismo problema, no se donde puedo conseguir esa batería en Uruguay.
newpower99.com has a battery and tools kit for about 45 dls.
I had the same problem , I'm not buying this brand anymore. Tengo el mismo problema, Ya no voy a comprar de esta marca .
Where will I get battery in india m
You guys can get the batteries on Amazon
Hello where did you buy the battery?
This CS-JMF310SL battery can be purchased here: www.mpfproducts.com/gsp872693-01-battery-for-jbl-flip-4-portable-bluetooth-speaker-3000mah/
Mujhe kripya Karke yah bataiye ki yah battery online Se Kaise mangaye kahan Milte Kaise magade Koi link to do mujhe bhi battery replacement karni hai per Kaise yah bataiye please
I have a problem with the batterie. Can you please help me.
whats the problem?
SuperSportFitness i have done it. Thanks
My speaker is work only when i put it in charge !! And if i turn off the charge it turned off ! Plz help me plz.
I had the same problem. Its cause the battery is dead. It needs to be replaced. The battery that you need to replace your flip 4 with is: www.amazon.com/gp/product/B07CZCFGTB/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
There are videos on you tube that show how to dismantle the flip 4... remove your battery with extreme caution if you are going to do it in any way shape or form that damages the battery, ie, a corkscrew... (like i did). I got away with it... but i wouldn't recommend. Batteries tend to explode upon puncture... at least make sure there is no charge left at all....
Thanx bro
Ma batterie à gonflé... Impossible à retirer, je pense être obligé de couper la coque...
I dropped it and it wont turn on what do I do?
Sell it on eBay....FAST!!!
yo tengo una pregunta , haber si alguien me ayuda ...yo lo cargo al flip 4 y en un minuto parece que esta en el 4to nivel y le cargo las 3 horas que me ha dicho el vendedor pero nunca llega al 5to nivel y se apaga como que ya esta cargado total pero lo enciendo y lo conecto a bluetooth y se descarga en 10 a 15 minutos y parparea el color rojo , que puede ser , alguien que me ayude por favor ..saludos
Edison farez cumbe Si, hermano, eso es la batteria por que yo tengo el mismo problema. Entiende este video y comprar las partes para abrir el jbl speaker.
Yo también tengo el mismo problema, será necesario remplazar la batería?
Yo ya ordené está batería pues mi bocina no me dura ni una hora a volumen medio
En este video la cosa parece sencilla además la batería viene con las herramientas necesarias. En aaliespress la puedes comprar
@@Memo07Rex si lo compre , solo estoy esperando y seguir con el proceso de cambiar y que vuelva a sonar bien , ya estare escribiendo haber como me va , gracias por todo y saludos desde ECUADOR
im actually using x2 bl-4c battery because that thing is too expensive
Thanks for leaving the comment:)
It is a bit costly actually, but with a very good battery performance.
Dimensions and how many cells the battery has would be extremely helpful. I'd say this information is downright necessary unless you want to be limited to that one brand of battery.
Thank you so much for your suggestion.
if your going to make a video, you should do it properly and show ALL THE STEPS!!!!! There are several screws on the battery side exterior panel that have to be removed before the video shows him simply twisting it off. These panels seem to be affixed to the case, mine was a bitch to remove AFTER getting the screws off. It broke partially in two. I will have to super glue it together before putting it back on. Then the battery has already been removed so he doesn't show how difficult and tight the battery is inside to get out.
Il serait bien de préciser que l'ancienne batterie est collée !!!
Wow all This time i thought there was 4 speakers
Its Four thou one on each side (Woofers) and two (Mids) onfront
Where can I buy battery for flip 4??
The original one??
Amazon
The bastards glued the entire battery into the slot.
God
I love the speaker,but you literally need to use all your hand strength for about a half hour to get these damn screws out. You also have too fidget with this thing over and over...just to put it back together again correctly. It was NOT easy,and i wont be buying this speaker again
I guess the tricky part is to remove the old battery. Better not show that.
This is is not a useful video,I demand my 3 minutes back.
where is old one 🔋?! to wtf
U mised a step in the video ......
for those struggling to remove the battery: th-cam.com/video/zon6RxyQkvs/w-d-xo.html
Are you the clock boy!