Awesome idea, one suggestion if I may: Add a hole in the acrylic close to the edge you hold so that your thumb can hold the workpiece instead of having to put it in place then mark the line.
Good job! Did you check the center-finder with a speed square? I will say that I think you're hands are too close to the blade when you work. The room for error becomes smaller that way
Nice job, but you might want to use 'clamping' screws rather than countersunk because if they are overtightened, they can shatter the Perspex/plexiglas. Ask me how I know. Regards Mark in the UK
the tool is not bad.. but showing how to find the center of a square is kinda %*#@*#%&^*....I think you should trim that part of video off... why do we need this tool to find the center of a square Lol? If its an irregular quadrangle, then this tool cannot find the center of it. if u know it is a square, then just draw the 2 diagonal lines from corner to corner... this is just my advice. I think you should only show how the tool is able to find the center of a circle/dowel/...
Moffick Mo You're telling him to delete a portion of his own video because you feel that it's a waste of your time? WTF? It's his video. He can have whatever he wants in it. When you make a video on this subject, you don't have to include that part. Until then, whointheheck are you to tell him to remove part of his video?
Why does everyone on TH-cam think they know how to make videos? He’s demonstrating that the tool does, in fact, find exact center. Then he shows it on circles. Please delete your account.
![[DIY] How to make a center marking gauge / Make your own special tool / HOMEMADE / WOODWORKING](http://i.ytimg.com/vi/FEhqtsbuVow/mqdefault.jpg)
![[DIY] How to make a center marking gauge / Make your own special tool / HOMEMADE / WOODWORKING](/img/tr.png)
![Shareปลาวาฬ ส่งท้าย SS1 พาเปียโน ขึ้น Ferrari ก่อนไปขาย แลก Nissan l [Nickynachat]](http://i.ytimg.com/vi/KAknGkTNIvg/mqdefault.jpg)
I use the "Vee" attachment on my combination square to find centers...works great!
I'm a Big Fan of your work Mr Je. Thanks for showing the videos
Nice job on that. Thank you for making & posting this video. (Nice work you do).
Masterfully made! Thanks for sharing your expertise!
Awesome idea, one suggestion if I may: Add a hole in the acrylic close to the edge you hold so that your thumb can hold the workpiece instead of having to put it in place then mark the line.
Great job. I like that you used plexiglass for the centre straight edge.
Showing your prowess as a builder is nice , making a video with explanation and measurements would be NICER.
You might wanna check this video out then . th-cam.com/video/T-d7Y3uAO8E/w-d-xo.html
Your the only person on TH-cam I can recognize by their hands ! Oh, that's Young Je ! Gotta make me one of these , especially for round stock.
A very useful tool. Thanks!
Good job. You are gifted and smart
super travail ,. encore une fois merci pour le partage
thanks, nicely done. I have to remember to sharpen my pencil because the width of the lead throws off my centering :)
mcorrade use a scriber
@@AlphaTroniks MUCHAS GRACIAS!!!
Good job! Did you check the center-finder with a speed square? I will say that I think you're hands are too close to the blade when you work. The room for error becomes smaller that way
Really genius woodworker.....👏👏👏
Extremamente prático, parabéns pelo trabalho!
Usefull jig, thanks young Je.
Congratulations ... I liked your video. . .Thank you for sharing with us. Hug.
Would this still work correctly if the item your'e marking is slightly out of round??????
Thanks my friend. I liked so much!
Big like 👍 👍 👍
very cool project .will be looking into making one myself
What a precision! Fantastic!
*1* watch out!!!! that long sleeves at the table saw...it can be a remembrance for the rest of your life
*2* i like your video
In
You, Sir, are amazing!
Good work ... i like it ... thx
퍼펙트 하십니다요~
안그래도 요즘 센터잡는 지그나 센터를 그어주는 그무개 생각하고 있었어요^^
미세하게 차이나는 길이에다 중심선을 찾거나 그을때 참 난감할때가 많았었어요~
감사합니다~~
?
Hi Je. That's nice.
You remember you were going to make plans available for sale for that crosscut sled?
What happen? No can do?
Genius. Pure genius
Muito bom e útil o jig, parabéns.
What are those circular objects you are using? Looks like wood inside a PVC pipe.
Cool. Thanks for making this video.
Genius!!! Thanks for share your job.
Beau travail bravo 🛠😉
Excellent work !
Very good my friend
Ingeniously made!
Awesome!
my man, you need a new sharpie! lol
keep up the great work!
...was gonna say!
Muito bom. Parabéns. (Brasil).Very good. Congratulations. (Brazil).
thank you~
Fantástico. saludos desde Barcelona Catalunya
Good Job...
Very nice
Bom trabalho gostei (Brasil).
parabéns que top
gostei muito bom éter fazer um pra mim
Nice job, but you might want to use 'clamping' screws rather than countersunk because if they are overtightened, they can shatter the Perspex/plexiglas. Ask me how I know.
Regards Mark in the UK
That plexi is pretty thick.
How do you know?
Erm... because I've been there, done that, and learned from my experience.
Ahhh, but do you have the T-Shirt?
What are 'clamping screws'?
thanks It's easy and very good
simple and easy to make
very good idea !
thank you~
Excellent job, thank u
Very cool!
Good job!! Like like 🇧🇷
Excellent!
On the mark as usual.
Boa tarde amigo também tenho um canal e faço trabalhos com madeira da uma forcinha lá
NO LONG SLEEVES! Safety first! Safety is number one priority.
Do you wear a crash helmet when you drive?
Thanks for sharing !
Great idea
very good
👍👍good
I couldn't let there be 111 comments. BTW, it looks like you do good work. Peace.
Conhecimentos em geometria plana. A geometria está em todos os cantos imagináveis. "Duas retas paralelas no infinito se cruzam..."
Thang you for your idea...
concordo com que o tae jin lee falou rsrsrs
9
PERFECT , SUPER
😍😍
BRAVO !!!
Nice one matey.
Paul Emmerson
Will you make a bandsaw without drill power
Yeah
But I already have two band saws
Cantecul nostru iubito ....
so you made a square?
so it only works on small, square bits of wood?, save your effort and just draw a line from corner to corner!
um, it works great for round pieces as shown at the end
genial
Does anyone else have the urge to blow the dust off the screen?😁
👍
Like...
*Like*
Nice video, but you talk too much lol
2:53 the birds are too loud lol
Ok
I don't get it please explain
luis arevalo what again
Zierschrift
O.k
x o like 2437
subbed
⁰
Seems a total waste of time making a jig when you can simply use a bevel or set square
Let's see your woodworking videos .... Oh shit! YOU don't have any!!
Kindly STFU!
@@oldmanfromscenetwentyfour8164 Kindly accept my handshake and shoulder tap, good sir.
the tool is not bad.. but showing how to find the center of a square is kinda %*#@*#%&^*....I think you should trim that part of video off... why do we need this tool to find the center of a square Lol? If its an irregular quadrangle, then this tool cannot find the center of it. if u know it is a square, then just draw the 2 diagonal lines from corner to corner... this is just my advice. I think you should only show how the tool is able to find the center of a circle/dowel/...
Moffick Mo You're telling him to delete a portion of his own video because you feel that it's a waste of your time? WTF? It's his video. He can have whatever he wants in it. When you make a video on this subject, you don't have to include that part. Until then, whointheheck are you to tell him to remove part of his video?
CrankyPants right
CrankyPants, agreed your words right.
Why does everyone on TH-cam think they know how to make videos? He’s demonstrating that the tool does, in fact, find exact center. Then he shows it on circles. Please delete your account.
Were you born an asshole or is it something you've had to work at?