Im just catching up watching all of your videos in no particular order, so sorry if I say the same thing or my comments seem similar. I just don't know of many other ways to say great job! You always seem to have a solution to any problem and that my friend is very impressive. I look forward to getting deeper into the programming aspect of automotive as nothing else seems to challenge me anymore. I know that with someone like you in my corner I can't fail. Thank you for your time in putting out these great videos! Bless 👍🏼🙏🏼
I am glad that I am not the only one taking an off ramp from the ICT highway..I've been a support engineer for years and there's so far no challenge in the automotive side that I find intimidating..Continue to do what you are doing..looking forward to the next one
@@makesisoanes6320 I thought as much. I tested Mpp v.18 connected via Godiac Gt100 breakoutbox to flash Mercedes SIM4LKE ECU. The reading was very quick and It flashed it with no issues. I wish I had an airbag module to test this rig on.. Any thought on this?
Just found you on here and so far am loving all of your videos! Am looking to learn more about clearing crash codes. Thanks again for all of your videos, they’ve been the most informative ones I’ve come across!
Hello, I have been subscribed for a while now and was wondering if you could share the link to download the Hex editor for desktop please. Also, do you know if I can program the hex through the IM608PRO 2 directly? Your videos are very informative and helpful! 👍
Hi, excellent work. The software for xp 400 on pc where can i download it? Xp 400 pro can do the precoding in Fiat Key? Thank you! And last question. Which program can i use for obtain PIN CODE fiat with the file read on BCM EEPROM?
Watched this to see how to do but when you say you know where the data is stored because you have experience, does not help anyone to identify. Must be certain patterns etc you look for?
Im just catching up watching all of your videos in no particular order, so sorry if I say the same thing or my comments seem similar. I just don't know of many other ways to say great job! You always seem to have a solution to any problem and that my friend is very impressive. I look forward to getting deeper into the programming aspect of automotive as nothing else seems to challenge me anymore. I know that with someone like you in my corner I can't fail. Thank you for your time in putting out these great videos! Bless 👍🏼🙏🏼
I am glad that I am not the only one taking an off ramp from the ICT highway..I've been a support engineer for years and there's so far no challenge in the automotive side that I find intimidating..Continue to do what you are doing..looking forward to the next one
lol. Me too. I realised that the IT field in my country is getting oversaturated.
I guess the the autel software you used here is not universal and is only useful to those using an autel tool. Please clarify...
@@zwahashu Yep it's only for the XP400
@@makesisoanes6320 I thought as much. I tested Mpp v.18 connected via Godiac Gt100 breakoutbox to flash Mercedes SIM4LKE ECU. The reading was very quick and It flashed it with no issues. I wish I had an airbag module to test this rig on.. Any thought on this?
Just found you on here and so far am loving all of your videos! Am looking to learn more about clearing crash codes. Thanks again for all of your videos, they’ve been the most informative ones I’ve come across!
Hey man you are one of the greatess!! i have learn a lot since i subscribed to your channel kip it going and thank you fore your work.
Curious why you didn't use the autel software to edit the hex fields? Thanks for sharing!
Because its an inconvenient interface.
Good question, is not the best editor, lacks features such as the compare option I did..
Great information, looking into learn about clearing crash codes. I would like the download of the program if possible. Great job .
I have a problem with a Mercedes w211 with vin matching problem, would this fix it, thank you!
Hello,
I have been subscribed for a while now and was wondering if you could share the link to download the Hex editor for desktop please.
Also, do you know if I can program the hex through the IM608PRO 2 directly?
Your videos are very informative and helpful! 👍
Hi, excellent work. The software for xp 400 on pc where can i download it?
Xp 400 pro can do the precoding in Fiat Key? Thank you!
And last question. Which program can i use for obtain PIN CODE fiat with the file read on BCM EEPROM?
Hi, thanks for sharing!. This could work with IM508+XP400pro?
Thanks!
Yes
Hi, I will like to download the program and congratulations you are doing a wonderful job!!
do you know if the reading/writing software comes with the xp400 tool?
Ive got a link to it, should be able to download after purchase as well
Can you share link for software please.
Thank you for the video. Please send the hex software
I dont c where to leave email for hex editor
Watched this to see how to do but when you say you know where the data is stored because you have experience, does not help anyone to identify. Must be certain patterns etc you look for?
Hi, it's not a pattern, it's experience to know in each module where crash data is stored.
How i can have the hexedit software?
Just Google HxD Hex Editor . It's free. It's real good.
Can you teach us coding sector
Hi.thinks pro
Stumble across you TH-cam channel researching xp400 great info. I do need the software you use so I will send you a email with my ebay info.