If you look at the big screen, you can see that the ionistors are charged up to 2.8 volts. The only thing I can say is that this is not welding, but a joke of humor for hamsters.
Да понятно что на дилетантов расчитано, технари сразу поймут что 2 конденсатора на такое не способны, да и внимательные посчитают что в них залилось всего около 150ватт/секунд, такой емкости хватит только поискрить 2-3 раза, а в видео он на протяжении нескольких секунд плавит полоску
@@LIVE-b7j ⚠️ God has said in the Quran: 🔵 { O mankind, worship your Lord, who created you and those before you, that you may become righteous - ( 2:21 ) 🔴 [He] who made for you the earth a bed [spread out] and the sky a ceiling and sent down from the sky, rain and brought forth thereby fruits as provision for you. So do not attribute to Allah equals while you know [that there is nothing similar to Him]. ( 2:22 ) 🔵 And if you are in doubt about what We have sent down upon Our Servant [Muhammad], then produce a surah the like thereof and call upon your witnesses other than Allah, if you should be truthful. ( 2:23 ) 🔴 But if you do not - and you will never be able to - then fear the Fire, whose fuel is men and stones, prepared for the disbelievers.( 2:24 ) 🔵 And give good tidings to those who believe and do righteous deeds that they will have gardens [in Paradise] beneath which rivers flow. Whenever they are provided with a provision of fruit therefrom, they will say, "This is what we were provided with before." And it is given to them in likeness. And they will have therein purified spouses, and they will abide therein eternally. ( 2:25 ) ⚠️ Quran
How is the label made with laser? Special filament that change colour by laser/heat? 🤔 4:07 - for better shared loading exit should be in opposite end, else first cap sees more load 🤓
Looks like you had to re-solder one of the busbar wires across the capacitors. Not knit picking. Just thought you might mention it for folk who try to do it exactly like you did and end up with certain contact points too close together.
1:15 the laser engraves 27V and so many billions of uF capacity. On the power supply we can clearly read 2.7V Was that a typo, the laser got weird or this is just for fun, like a joke, meant just to entertain us?! Because if this is for real, the whole video is nothing more than a SCAM! We can't see the whole system (from power supply to the end-probes) at a glance and working. They are in different frames leading us to understand this is a joke or, worst, something sketchy is happening and that is NOT good.
سلام با توجه به اینکه درحین آموزش مشخصات فنی خازن و ولتاژ ورودی به کارآموز نشان داده نشده بنابراین، آموزش داده شده ناقص وهنر جو نمیتواند برای ساخت آن استفاده کند بنابراین ازنظر من فقط نمایشی بیش نیست
I don't want to send hate but I feel like that spot welding is too strong for what I saw also why the other wires use to recharge the capacitors completely hidden but cool idea
This is not a weld. This is a box with ionistors for pampering children. A variant of the current welding on ionistors in this video- th-cam.com/video/8H7X_T1qhjs/w-d-xo.html In the annotation to the video there is a link to the archive with files for repetition.
Que dices, como va a cargar a 24V. Se cargan a 2.7V. Ponle 24V y verás la bonita explosión que te va a pegar. Me encanta la gente que habla sin tener ni idea y encima pone en peligro a otras.
Como uma associação em paralelo resulta em um capacitor de 27V? Até onde sei o resultado seria um capacitor de 2.7V 1000000uF (500000 + 500000), pois é uma associação em paralelo, a tensão não altera, soma-se as capacitâncias.
Своеобразный паренёк. Сначала сделал на ЧПУ корпус, потом вклеил банки, потом где-то в недрах припаял провода, а уже потом дрелью просверлил дырку... именно ДЫРКУ!! Ибо отверстие должно было быть ещё на стадии ЧПУ. Да и вообще... понторез тот ещё.
Add a video of you spot welding 18650s with this spot welder... Actually don't. You'll cause the cells to go into thermal runaway and they'll explode. I hope no one tries to copy this video.
Input and output actually as same as way.. But why you make other line..? And you didn't keep it from shorted. For spot welding only need low voltage my be at 5 volt, but high in current.
Why the thin wires they do the same as the 'welding rods' the ends of these ' charge wires are never shown while the 'burning' take place .. think I will give it 3 days then I report it as scam ... Please fix this problem?
Mera ak electronic bala channel hai par mujhe koi spot hi nhi karta hai par aap ak bar mere channel par bhi Jake jrur dekhna. Mere channel ka nam. Mr yogeshk Disref karne ke liye sorry par ak bar Jana jrur
Yep. Has two 500F 2.7V supercaps in parallel. His label is correct in that aspect, although his omitted the decimal point for the voltage. And could have simply stated "1000 F" instead of using a too small unit and appending all those zeros.
Komisch, die Anschlussdrähte sind kürzer als 15 cm aber während des Schweißvorgangs bewegen sich die Enden am Elko keinen Millimeter. Verarsch dich selbst aber nicht deine Mitmenschen!👎👎👎👎👎. Ach ja, und lerne löten, denn das Erste was schmilzt ist nicht der Metallstreifen sondern deine Löt(klebe)stelle.
Absolutamente FAKE. No se como un usuario con tantos suscriptores sube este tipo de videos falsos. Debiste al menos extender el largo de los cables para que no se notara que son otros.
@@wbwnugroho To czemu autor wkłada dwa kondensatory 500u, a na obudowie pisze 1000000? U mnie matematyka działa poprawnie w odróżnieniu do autora... So why does the author put two 500u capacitors and write 1,000,000 on the housing? For me, the math works fine, unlike the author ...
Все хрень... Запитаны щупы от другого источника. Этих кондеров не хватит на так долго... Отсилы на одну не уверенную точку. 27 вольт из 2.7вольтовых конденсаторов?! Хех. Чухня.
5:53 a beautiful shot of a drill into a capacitor ...
what the hell!!!! this channel is hella unsafe lol
Hahaha, yes...
Yup.
You can even see the silver chewed casing👍
😂😂😂🎉
How you get 2pcs of 2.7 volt capacitors in parallel becoming 27 volt ?
Magic
Jaaduu
If you look at the big screen, you can see that the ionistors are charged up to 2.8 volts. The only thing I can say is that this is not welding, but a joke of humor for hamsters.
easy, he forgot to put de dot, 27v means 2.7v
Your solder mojo is weak.
надо на коробочке было написать ёмкость в пикофарадах, а напряжение в микровольтах, числа выглядели бы ещё значительнее
При манипуляции со щупами, провода идущие от блока даже не шевелятся, а они изначально короткие. Чем они запитаны, в итоге - хер его знает.
И вообще, я думал он сам будет кондер делать. А оказывается чтоб сделать конденсатор, надо взять купленный конденсатор 😄
Да понятно что на дилетантов расчитано, технари сразу поймут что 2 конденсатора на такое не способны, да и внимательные посчитают что в них залилось всего около 150ватт/секунд, такой емкости хватит только поискрить 2-3 раза, а в видео он на протяжении нескольких секунд плавит полоску
@@wildnew ахахахах эксперт с тебя не какой на таких конденсаторах это отлично работает
@@dmitriyonishchenko3497 собери такой же, сними видео, покажи как это отлично работает, и я признаю свою некомпетентность, а пока иди учись.
Дядя хорошо умеет на лазерном гравере рисовать и делать коробочки из пластмассы, но схемотехника у него мое почтение... 👩🦼👩🦼👩🏻🦼
This is only for sparking o burn not for welding but box and printing amazing
При таких токах его холодная пайка давно бы отвалилась в этой коробченке😂
Кайфы в том что втулки медные, а гайки стальные, ммммм лучший
Фигню глаголете. При таких токах припой повторно расплавился и растёкся по контактам правильно! :))
Зато хлестанулся лазерным гравёром))Спасибо, что есть перемотка..
Одного меня смутило надевание защитных кембриков ПОСЛЕ зарядки этого фугаса?
I love all the wrong numbers leaders on the case 😂
27 should be 2.7
And the capacitance should be in Farads 😂
Инструкция, как максимально усложнить сборку простой параллельной спайки кондеров
Anode and cathode position onthe capacitors changed surprisingly enough under the video...... o.O
Dear author. Please tell me what kind of typewriter is this that prints the name?
It's a laser engraver
@@FrpKiller ok)
Фантастика, два кондёра в охуенной коробке🤣🤣🤣
Это не кондёры. Он долбаёб
Risk of Damage the capacitor by short circuit..... 💥
😄😄😄
Я вспомнил выжигатель из школы на уроках труда.
А у меня до сих пор такой есть.
Заслуга чувака в создании коробки?
А ещё он кондёр просверлил)))
Trickery! spot welding wires go to another power source. I've spent too many years playing with super capacitors to know this.
For spot welding, you need low voltage and high current. But your welder is not suitable because voltage is too high.
2.7volt
It is using 2.7v 500F capacitor. The label is wrong.
@@LIVE-b7j ⚠️ God has said in the Quran:
🔵 { O mankind, worship your Lord, who created you and those before you, that you may become righteous - ( 2:21 )
🔴 [He] who made for you the earth a bed [spread out] and the sky a ceiling and sent down from the sky, rain and brought forth thereby fruits as provision for you. So do not attribute to Allah equals while you know [that there is nothing similar to Him]. ( 2:22 )
🔵 And if you are in doubt about what We have sent down upon Our Servant [Muhammad], then produce a surah the like thereof and call upon your witnesses other than Allah, if you should be truthful. ( 2:23 )
🔴 But if you do not - and you will never be able to - then fear the Fire, whose fuel is men and stones, prepared for the disbelievers.( 2:24 )
🔵 And give good tidings to those who believe and do righteous deeds that they will have gardens [in Paradise] beneath which rivers flow. Whenever they are provided with a provision of fruit therefrom, they will say, "This is what we were provided with before." And it is given to them in likeness. And they will have therein purified spouses, and they will abide therein eternally. ( 2:25 )
⚠️ Quran
How is the label made with laser? Special filament that change colour by laser/heat? 🤔
4:07 - for better shared loading exit should be in opposite end, else first cap sees more load 🤓
Can the output voltage adjust ?
Looks like you had to re-solder one of the busbar wires across the capacitors. Not knit picking. Just thought you might mention it for folk who try to do it exactly like you did and end up with certain contact points too close together.
Very Cool 😎
No
Much simple and effective. liked it very much. easy to make and use.
You successfully made a metal-cooking-machine instead of welding 😄😄😄😄
Excelente video.
Wow, very powerful tool to spot welding. Gift.💯🌻❤🧡🧡🌹💖💝💐💐🍀🌹🌹🌹✌👍
1:15 the laser engraves 27V and so many billions of uF capacity. On the power supply we can clearly read 2.7V Was that a typo, the laser got weird or this is just for fun, like a joke, meant just to entertain us?! Because if this is for real, the whole video is nothing more than a SCAM!
We can't see the whole system (from power supply to the end-probes) at a glance and working. They are in different frames leading us to understand this is a joke or, worst, something sketchy is happening and that is NOT good.
This is a scam, as is with his other videos
Kitne volt input dena hai kitne amp ka current lega
How much voltage in put?
سلام با توجه به اینکه درحین آموزش مشخصات فنی خازن و ولتاژ ورودی به کارآموز نشان داده نشده بنابراین، آموزش داده شده ناقص وهنر جو نمیتواند برای ساخت آن استفاده کند بنابراین ازنظر من فقط نمایشی بیش نیست
What did u cut it with
2.7V а не 27???
У него свои вольты, он художник, он так видит
He almost pierced the capacitor with the drill bit xd
Do not use glue on the top! What if get it?
Can you make in 3 minute clip?
I don't want to send hate but I feel like that spot welding is too strong for what I saw also why the other wires use to recharge the capacitors completely hidden but cool idea
Input source????
This is not a weld. This is a box with ionistors for pampering children. A variant of the current welding on ionistors in this video- th-cam.com/video/8H7X_T1qhjs/w-d-xo.html
In the annotation to the video there is a link to the archive with files for repetition.
VERY COOL BUILD 👍🇮🇪💚
How to charge these capacitors ?
Como que carrega os capacitores?
Con voltaje de 24 voltios
Que dices, como va a cargar a 24V. Se cargan a 2.7V. Ponle 24V y verás la bonita explosión que te va a pegar. Me encanta la gente que habla sin tener ni idea y encima pone en peligro a otras.
👍 ⭐️⭐️⭐️⭐️⭐️ *Powerful Machine*
Всё дело в коробке. Просо она волшебная
Это особая ютуб магия
Como uma associação em paralelo resulta em um capacitor de 27V?
Até onde sei o resultado seria um capacitor de 2.7V 1000000uF (500000 + 500000), pois é uma associação em paralelo, a tensão não altera, soma-se as capacitâncias.
The voltage doesn't change. It's still 2.7 volts. Read the power supply readout.
muito bom seu video obrigado
wow.. a 2X 500F capacitor.. and just 2.7V
Hi guys, I have a question. To make a powerful and strong welding machine, is the voltage effective or Farats?
current
Зачем тонкие провода? Если они коротнут, сгорят.
Makasih ilmunya
For the fellas in the comments, spot welding != stick welding of any kind
Good idea 🥰🥰
Encore un rigolo
Capacitor ki value sthirta se dikhayen
Nice..
Своеобразный паренёк. Сначала сделал на ЧПУ корпус, потом вклеил банки, потом где-то в недрах припаял провода, а уже потом дрелью просверлил дырку... именно ДЫРКУ!! Ибо отверстие должно было быть ещё на стадии ЧПУ. Да и вообще... понторез тот ещё.
Bagusnya keen
Bro, please make a video on tools you use.
Add a video of you spot welding 18650s with this spot welder... Actually don't. You'll cause the cells to go into thermal runaway and they'll explode. I hope no one tries to copy this video.
in italia what you did is ARCO VOLTAICO
But the purpose a spot welding machine is not to melt the nickel strips.
e input voltage eka kiyda damme na dapan eka. mg 1k danna
I like
Bhai ji Jo aapane machine Banai Hai Building wali yah machine Humko chahie
Input and output actually as same as way..
But why you make other line..?
And you didn't keep it from shorted.
For spot welding only need low voltage my be at 5 volt, but high in current.
It's mislabelled. Only has 2.7 volts at 1000 Farads.
Why the thin wires they do the same as the 'welding rods' the ends of these ' charge wires are never shown while the 'burning' take place .. think I will give it 3 days then I report it as scam ... Please fix this problem?
It's a device meant to spot-weld conductor strips to battery terminals.
Who played with 2.7v 500F will know there's nothing unreal in this video
ਕੀ ਫਾਇਦਾ ਗੁੰਗੀ ਵੀਡੀਓ ਦਾ
🇩🇿❤❤❤👍👍👍😍😍😍🇩🇿
Oh my good, it's 2.7V... 😑 27v???? WTF??? 🤣 go to colage man..... 😂
It's not possible to laser these white plastic
Mantap
Puras mentiras los filtros o capacitores solo descargan una sola ves y no es suficiente como para soldar 😜
Aap yah machine Humko readymade kitne Mein Denge
👍👍👍👍👍👍👍👍👍👍
First
Mera ak electronic bala channel hai par mujhe koi spot hi nhi karta hai par aap ak bar mere channel par bhi Jake jrur dekhna.
Mere channel ka nam. Mr yogeshk
Disref karne ke liye sorry par ak bar Jana jrur
I upvoted you for how gdang unsafe everything here is. I mean YEEEE HAW
Welding at 8:00
Muito inteli
Show the car battery
1000000000μF=1000000mF=1000F=1kF.
Why no...
Там китайцы спиздели раз в 500, не ссы)))
Yep. Has two 500F 2.7V supercaps in parallel. His label is correct in that aspect, although his omitted the decimal point for the voltage. And could have simply stated "1000 F" instead of using a too small unit and appending all those zeros.
I would have soldered the wires first to make it easier. But, I'm white and smarter.
Music?
Lol was that 1 trillion micro farads?
Everyone got one of those machines eh. Just buy a spot welder.
How much the voltes
2.7 V 500mf 2.7 V x 2
Komisch, die Anschlussdrähte sind kürzer als 15 cm aber während des Schweißvorgangs bewegen sich die Enden am Elko keinen Millimeter.
Verarsch dich selbst aber nicht deine Mitmenschen!👎👎👎👎👎.
Ach ja, und lerne löten, denn das Erste was schmilzt ist nicht der Metallstreifen sondern deine Löt(klebe)stelle.
Absolutamente FAKE. No se como un usuario con tantos suscriptores sube este tipo de videos falsos. Debiste al menos extender el largo de los cables para que no se notara que son otros.
I totally agree
благодарю!пригодитса
ПВХ резать на разное, все равно что пить воду у дороги
👍🏻
To much power can damage batrey trus me
টিনের মত ঐইটার দাম কত
Açıklama ve ne kullanildigi net goremedik
2*500u = 1000000000u......
@ Poitr Moy :
2 * 500 F = 1000 * 1000 000 uF
@@wbwnugroho
To czemu autor wkłada dwa kondensatory 500u, a na obudowie pisze 1000000?
U mnie matematyka działa poprawnie w odróżnieniu do autora...
So why does the author put two 500u capacitors and write 1,000,000 on the housing?
For me, the math works fine, unlike the author ...
Глянув на вказану ємність і
Одразу згадав китайський майфун макасонік, на якому писало 90000wat.
Все хрень... Запитаны щупы от другого источника. Этих кондеров не хватит на так долго... Отсилы на одну не уверенную точку.
27 вольт из 2.7вольтовых конденсаторов?! Хех. Чухня.
2.7v
mf f ?
You can buy components from maker bazar for cheap price
Ну И? А где плата регулировки ?Сжёг ДЯДЯ ленту и что ? называется -КАК НЕ НАДО ДЕЛАТЬ !!!!!
Fake🤔
+ ve - kablosunu neden ilk önce yuvaya takarken ters taktın sonra düzelttigini videode göstermedim sen hokkabazmısın ?
Fayk