Traxxas Nitro Sport SH Engines .12 Pro Build

Link to Parts used in the video below.
This video I rebuild a Traxxas Nitro Sport and install a new SH Engines .12 Pro Engine, broke the engine in Doing the Adam Drake break in method, preheat the engine to 180 degrees and do 4 tanks at idle , keeping the engine temp at 220-240 degrees for a whole tank. Letting the engine cool down to ambient temperature once done the 1st and 2nd tank, 3rd and 4th tank you do not need to let the engine cool down. And very important to put the Piston and Bottom Dead center after every run to avoid the Piston getting stuck in the sleeve when cooling down.
Driving process of the Break in.
Drive the car around gently applying only a 1/4 throttle in short bursts for a whole tank.
Let the engine cool for 10 minutes after every tank.
Monitor the engine temperature.
Drive the car around applying 1/2 throttle gently in short bursts for a whole tank
Let the Engine Cool down for 10 Minutes.
Monitor engine temperature.
Drive the car around applying 3/4 throttle gently in short bursts for a whole tank.
Let the Engine Cool down for 10 Minutes.
Monitor engine temperature.
Drive the car around applying FULL throttle gently in short bursts for a whole tank
Let the Engine Cool down for 10 Minutes.
Monitor engine temperature.
LRP STARTER BOX
www.amainhobbi...
LRP STARTER BOX BATTERIES
www.amainhobbi...
SH ENGINES .12 PRO
www.amainhobbi...
SH.12 Air filter
www.amainhobbi...
FX ENGINES 2696 TUNED PIPE
www.amainhobbi...
M2C 36MM 3 SHOE CLUTCH KIT
www.amainhobbi...

[@bradkalman2353]

Thanks for the sub.