Can you provide a link to that hardware. I have a jet Jam and I want to do the same thing. Those smaller KV motors free up so much room. Can those be used on an rc car? Also so you know where I can get an adapter to connect the esc power to the 7v battery ?
I ordered 2 30mm metal jets for my rc yaht upgrade you think 2 2200kv outrunners and 2 60amp escs will work I uploaded a old vid on my channel its 27''' inches lol... and the escs are 2 to 6s capable
which out motor could be bought for present time, Aquacraft's are out of stock. and also maintain the self righting. It will be run on a 2s only. Thank you lovely video
Nice! Im looking at my motors and esc now to do mine. Cant wait until the next video to see how much faster it is, and how it sounds. Not a fan of brushed motors from the '70s. Not sure why any mfg would still use them. Do you know if the FS012 mono china boat's prop can be upgraded to metal? Im using mine with pool noodles as a rescue and thinking about more torque.
Nice upgrade and only recommend a battery stop added so the battery can’t get against the outrunner👍❤️With the battery back farther may keep that jet from coming out the water and loosing propulsion .
@IRONCLAD RC I understand....I was able to find an esc/motor combo that are waterproof for mine that seems to work ok. I had to add extra weights to the rear to compensate for weight of 3s battery. It's fun on a small pond . It still cavitates some. I can't believe Proboat made them so slow from the factory. For the cost when they first came out, they really should of been a little better.
I just use these cheap servos, throw away servos. If endpoints are set correctly you'll get a decent life from them. www.ebay.com/itm/234072650713?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=GsH0I07KQDm&sssrc=4429486&ssuid=yQkZS9FcQay&var=&widget_ver=artemis&media=COPY
Basically, might want to measure the stock motor shaft so you can pick your motor according to shaft size so you don't have to buy a new coupler. If I remember correctly it's 2.3mm? I think could be wrong
This is top10 rc boat channels for sure.
Thank you.
Best FE Rc Boat community on you tube
Damn I appreciate the fact you actually take the time to explain your info Thank dude!
Just bought one of these so I don’t have to swim for my BJ24 V2 every time it flips 😂 … but now I want to do some upgrades too 😈
2×30 mm water jet pump water thrust propeller for rc $20,45 metal ebay...your welcome
Can you provide a link to that hardware. I have a jet Jam and I want to do the same thing. Those smaller KV motors free up so much room. Can those be used on an rc car?
Also so you know where I can get an adapter to connect the esc power to the 7v battery ?
How do you access the screws to remove motor ? You have to take hull apart ?
@kensmith7491 it's very tight, 1/8 turns at a time, Motor plate comes off with the motor then you remove the motor from the plate
@@IRONCLADRC ok, i guess i better get a L shaped metric driver to get to it ..
@@kensmith7491 lol, most definitely, kinda pain in the you know what.
I ordered 2 30mm metal jets for my rc yaht upgrade you think 2 2200kv outrunners and 2 60amp escs will work I uploaded a old vid on my channel its 27''' inches lol... and the escs are 2 to 6s capable
Yea you should be okay, Twin motor so the load will be shared between the two jet pumps
which out motor could be bought for present time, Aquacraft's are out of stock. and also maintain the self righting. It will be run on a 2s only. Thank you lovely video
Tks 4 all your vids lot of things to learn for me ! ;-)
No problem brother thanks for watching
Nice! Im looking at my motors and esc now to do mine. Cant wait until the next video to see how much faster it is, and how it sounds. Not a fan of brushed motors from the '70s. Not sure why any mfg would still use them. Do you know if the FS012 mono china boat's prop can be upgraded to metal? Im using mine with pool noodles as a rescue and thinking about more torque.
Just got back from my test run a 3000 kv motor should be a little quicker than a 2200. Bummer there's no upgraded impellers
LOOKS LIKE AN EZ UPGRADE
Nice upgrade and only recommend a battery stop added so the battery can’t get against the outrunner👍❤️With the battery back farther may keep that jet from coming out the water and loosing propulsion .
Thanks brother I didn't even think about that.
I have exploded a battery from rubbing on an out runner!
Boat, was a charred pile of scrap in seconds :(
@@berrymucuckiner4890did it go down epic way or sad way
Good video!
How are you liking the upgrade?
It's okay for what I use it for (recovery) if you wanna go faster I'd go with a higher kv motor 4500kv'isg
@IRONCLAD RC I understand....I was able to find an esc/motor combo that are waterproof for mine that seems to work ok. I had to add extra weights to the rear to compensate for weight of 3s battery. It's fun on a small pond . It still cavitates some. I can't believe Proboat made them so slow from the factory. For the cost when they first came out, they really should of been a little better.
What size servo did you use?
I just use these cheap servos, throw away servos. If endpoints are set correctly you'll get a decent life from them.
www.ebay.com/itm/234072650713?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=GsH0I07KQDm&sssrc=4429486&ssuid=yQkZS9FcQay&var=&widget_ver=artemis&media=COPY
Great upgrade Big B! Hey just curious why not bind to your DX5 or whatever Tx you prefer to use?
Using the cheap remotes so I can let the kids race each other separate remote type deal
Good deal!!
I’m working on the same recovery boat, I decided to use a separate transmitter because it will recover a boat that I use my DX5 with.
Thats my cat, except its weed and nip no beer.
Tell, what KV at the motor? 2200?
Yes 2200 but I recommend a higher kv if your wanting to go faster
@@IRONCLADRC have you a impeller ubgrade?
Super meiner ist noch original.
Link too motor?
It's disconnected, old aquacraft motor
@@IRONCLADRC so its any 28mm motor that fits the motor mount correct?
Basically, might want to measure the stock motor shaft so you can pick your motor according to shaft size so you don't have to buy a new coupler. If I remember correctly it's 2.3mm? I think could be wrong