Road Performance Comparison • V&H Twin Slash Competition Baffles - Part 2
ฝัง
- เผยแพร่เมื่อ 10 ก.ค. 2024
- My impressions of the Vance & Hines twin slash competition baffles on my Harley Street Bob FXBB with the Stage 3 kit. This is Part 2 of a two-video series on the Vance & Hines competition baffles. In this video, I share my impressions of sound & performance after logging some miles on the competition baffles. In the previous video, I covered the installation process and sound comparison at idle. Vance & Hines offers three sets of baffles for the Twin Slash slip-ons: the standard baffles that come installed, quiet baffles, and competition baffles. Hear how the competition baffles sound with several ride-bys at different RPM levels.
⏱️ 𝗧𝗔𝗕𝗟𝗘 𝗢𝗙 𝗖𝗢𝗡𝗧𝗘𝗡𝗧𝗦 ⏱️
= = = = = = = = = = = = = = = = = = = =
00:00 Intro
01:00 Competition Baffles at Idle (Watch Part 1 For Full Idle Comparison)
01:39 2,500 RPM Ride-By
01:49 3,500 RPM Ride-By
02:02 4,500 RPM Ride-By
02:15 5,500 RPM Ride-By
02:26 My Impressions About The Sound Differences
02:43 My Impressions About The Performance Differences
03:20 Fuel Map Considerations
03:28 Factory Warranty Implications With Changing Fuel Map
03:55 The Bottom Line
╔═╦╗╔╦╗╔═╦═╦╦╦╦╗╔═╗
║╚╣║║║╚╣╚╣╔╣╔╣║╚╣═╣
╠╗║╚╝║║╠╗║╚╣║║║║║═╣
╚═╩══╩═╩═╩═╩╝╚╩═╩═╝
𝗗𝗢𝗡'𝗧 𝗠𝗜𝗦𝗦 𝗩𝗜𝗗𝗘𝗢𝗦! Please subscribe, tap the bell 🔔, and enable all notifications to be notified: bit.ly/subscribe_rons_workshop
= = = = = = = = = = = = = = = = = = = =
𝗜𝗡 𝗧𝗛𝗜𝗦 𝗩𝗜𝗗𝗘𝗢
= = = = = = = = = = = = = = = = = = = =
Vance & Hines Competition Baffle for Twin Slash Slip Ons 21897 (sold as singles)*
amzn.to/3frFWl5
ebay.to/2Pyp6cN
bit.ly/2AILwB5 (RevZilla)
Vance & Hines Twin Slash Slip-Ons*
amzn.to/2W5hXjK
ebay.to/3fB85tF
bit.ly/3d8Tl01 (RevZilla)
= = = = = = = = = = = = = = = = = = = =
𝗢𝗧𝗛𝗘𝗥 𝗩𝗜𝗗𝗘𝗢𝗦
= = = = = = = = = = = = = = = = = = = =
Part 1 - Vance & Hines Competition Baffles Installation and Sound Comparison at Idle
• V&H Twin Slash Competi...
Stage 3 • Milwaukee 8 • 114 ci • Softail Street Bob FXBB
• Want Stage 3? Watch Fi...
Stage III Street Bob Fuel Economy / Mileage
• Street Bob Fuel Econom...
Arlen Ness Monster Sucker Breather Mod
• Monster Sucker Mod • A...
= = = = = = = = = = = = = = = = = = = =
𝗚𝗘𝗧 𝗖𝗢𝗚 𝗟𝗢𝗚𝗢 𝗠𝗘𝗥𝗖𝗛
= = = = = = = = = = = = = = = = = = = =
Cog logo t-shirts, hoodies, etc.
bit.ly/ronsworkshop_cog_logo_m...
= = = = = = = = = = = = = = = = = = = =
𝗠𝗔𝗞𝗘 𝗖𝗢𝗢𝗟 𝗦𝗧𝗨𝗙𝗙
= = = = = = = = = = = = = = = = = = = =
Create cool stickers with Sticker Mule*
bit.ly/rw_sticker_mule
Optimize your TH-cam videos for search with vidIQ*
bit.ly/rw_vidIQ
Get Davinci Resolve Studio (best video editor!)*
amzn.to/2FzSmvf
Create awesome email templates with Stripo*
bit.ly/rw_stripo_email
Stream live video with Ecamm Live*
bit.ly/rw_ecamm_live
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
* 𝘛𝘩𝘪𝘴 𝘪𝘴 𝘢𝘯 𝘢𝘧𝘧𝘪𝘭𝘪𝘢𝘵𝘦 𝘭𝘪𝘯𝘬, 𝘸𝘩𝘪𝘤𝘩 𝘮𝘦𝘢𝘯𝘴 𝘪𝘧 𝘺𝘰𝘶 𝘣𝘶𝘺 𝘴𝘰𝘮𝘦𝘵𝘩𝘪𝘯𝘨 𝘢𝘧𝘵𝘦𝘳 𝘤𝘭𝘪𝘤𝘬𝘪𝘯𝘨 𝘵𝘩𝘦 𝘭𝘪𝘯𝘬 𝘐'𝘭𝘭 𝘳𝘦𝘤𝘦𝘪𝘷𝘦 𝘢 𝘴𝘮𝘢𝘭𝘭 𝘤𝘰𝘮𝘮𝘪𝘴𝘴𝘪𝘰𝘯 𝘢𝘵 𝘯𝘰 𝘢𝘥𝘥𝘪𝘵𝘪𝘰𝘯𝘢𝘭 𝘤𝘰𝘴𝘵 𝘵𝘰 𝘺𝘰𝘶. 𝘛𝘩𝘪𝘴 𝘩𝘦𝘭𝘱𝘴 𝘴𝘶𝘱𝘱𝘰𝘳𝘵 𝘵𝘩𝘦 𝘤𝘩𝘢𝘯𝘯𝘦𝘭 𝘢𝘯𝘥 𝘩𝘦𝘭𝘱𝘴 𝘮𝘦 𝘬𝘦𝘦𝘱 𝘮𝘢𝘬𝘪𝘯𝘨 𝘷𝘪𝘥𝘦𝘰𝘴 𝘭𝘪𝘬𝘦 𝘵𝘩𝘪𝘴. 𝘗𝘭𝘦𝘢𝘴𝘦 𝘥𝘰 𝘯𝘰𝘵 𝘴𝘱𝘦𝘯𝘥 𝘢𝘯𝘺 𝘮𝘰𝘯𝘦𝘺 𝘰𝘯 𝘵𝘩𝘦𝘴𝘦 𝘱𝘳𝘰𝘥𝘶𝘤𝘵𝘴 𝘶𝘯𝘭𝘦𝘴𝘴 𝘺𝘰𝘶 𝘧𝘦𝘦𝘭 𝘺𝘰𝘶 𝘯𝘦𝘦𝘥 𝘵𝘩𝘦𝘮 𝘰𝘳 𝘵𝘩𝘢𝘵 𝘵𝘩𝘦𝘺 𝘸𝘪𝘭𝘭 𝘩𝘦𝘭𝘱 𝘺𝘰𝘶 𝘢𝘤𝘩𝘪𝘦𝘷𝘦 𝘺𝘰𝘶𝘳 𝘨𝘰𝘢𝘭𝘴. 👍🏼 𝘛𝘩𝘢𝘯𝘬 𝘺𝘰𝘶 𝘧𝘰𝘳 𝘺𝘰𝘶𝘳 𝘴𝘶𝘱𝘱𝘰𝘳𝘵!
#ronsworkshop #vanceandhines #harleystageiii #milwaukee8
In this video: Vance & Hines Twin Slash Slip-Ons with Competition Baffles, Installed on my Harley-Davidson Street Bob FXBB with the Stage 3 Kit. Additional fitment info: The Vance & Hines 21897 Competition Baffle fits the Vance & Hines 3" Round Twin Slash Slip-On, 3" Fishtail Slip-On, and 3" Python Mamba Slip-On Mufflers. - ยานยนต์และพาหนะ
Let me know if you've tried the Vance & Hines competition baffles or even the quiet baffles. Did you make any changes to your fuel map? I'd like to tweak it a little but I can't until my warranty is up. Let me know what you've tried!
I love your videos Ron. Really appreciate you taking the time to make them. Love your bike ,too! I have a 22 street bob and hope to follow your footsteps with my upgrades.
Hey joejunior1974 - thanks so much for the kind words! I’m so glad you’re benefiting from the videos. I truly enjoy the Street Bob and I’m sure you’ll really enjoy making it yours :)
And if you want a sticker send me a DM on Telegram, Instagram or Signal with the mailing info @RonsWorkshop
thanks for the great video. I just bought a 2017 Fat Boy S, and it had the Twins Slash slip-ons installed from day one (according to service records). The motor is the 110SE with the SE Intake. The exhaust sounds great, but it is a little too loud for my taste, since I leave for work at 5am. Was trying to figure out what baffles it has installed. Your side by side shot of the stock / competition baffles helped me see that I have the Standard Baffle. I am ordering the Quiet Baffles today. I'll let you know how it goes.
Thanks again.
Wizard In Black - thanks for the feedback! I’m so glad the video was helpful for you. Definitely let me know how it goes with the quiet baffles.
If you want a channel sticker send me a DM on Telegram or Instagram with the mailing info @RonsWorkshop
I'm almost in the same situation, leaving for work at 5am, just on a different model 2018 Street bob (just bought it, but haven't been riding to work yet due to time off) with same pipes. However I'm afraid it will annoy neighbours. Now I'm thinking about trying quiet baffles.
Hey Boris - let us know how it goes if you try the quiet baffles!
@@Mytology69 hey Boris I recorded before and after videos of my install, including readings from my decibel meter.
It did quiet them enough that it won’t wake up the whole neighborhood, while still maintaining that big twin sound. Now this is at idle / low RPM. when you open ‘er up, it’s still loud.
My belief is that the quiet baffles filters out a great deal of the mid/high frequencies, leaving mostly lower frequencies to be enjoyed. Again, at idle. I took readings at 20” from exhaust, and 10’ from exhaust. Both cold starts, then another set of reading with the bike Hot. I’ll come back here and drop a link when the video is uploaded, just need to trim it down.
@@killdozer3464 awesome thanks!
I'm mainly concerned about idle and low rpm. I've been looking around for baffles to purchase online, but prices vary, also some sell a pair some sell 1 at a time. Its tricky as I don't live in USA.
I'm current gonna try modding the V&H baffles. I like the deep growl but it's just too loud for me on long runs. So gonna chop the baffle in half and weld in a plate then wrap with fibre glass. I might video the process.
Hey P. S - sounds like a fun project. Let me know how it goes!
I've really enjoyed watching your two videos on this as I'm considering the competition baffles for my 2019 Road King with twin slash. I don't suppose you have any ride bby comparisons do you? Also, do you think you will notice more of a difference in sound depending on what mods you have on your bike, i.e. I only have the slip ons and no other upgrades, would you expect to see more or less of a change with the competition baffles?
Hey Snerkler - thanks for the feedback! I don’t have any ride-by comparisons but that’s a great suggestion. I still have the standard baffles so I’ll work that into the video schedule - I’m just not sure of the exact timing.
As for sound differences based on engine mods - I’d say there will be a difference no matter what, but mods like a more aggressive cam, higher compression, etc. would really accentuate the differences.
If you want a channel sticker send me a DM on Telegram or Instagram with the mailing info @RonsWorkshop
@@RonsWorkshop thanks for your response, that'd be great if you could do the video, I'll subscribe to keep updated. Thanks for the offer for a sticker but I don't use them 👍🏻
Thanks for the video.
Anyone looking to change, there is a massive difference between standard and competition baffles. They are just very loud in gear 1 and 2.
Does anyone know how to get the sound somewhere in between standard and competition baffles. Is there a way to make competition little bit quiet. Thanks
Hey J Singh - one idea is to modify the stock baffles by enlarging the holes with a drill. But there could be ramifications. They’re in a certain pattern and a certain size so it may be unwise to go “freestyle” on them. But maybe it isn’t s big deal?
Does the competition baffle have packing around it?
Nope! It's just the metal tube that you see in the video. The standard baffle doesn't have packing either, it is just narrower with a different hole pattern.
If you want a channel sticker DM me the mailing info on Instagram @RonsWorkshop and I’ll send you one :)
Do they sell them as a pair or are they sold individually? I found some for about 40 bucks but that has to be for just one
Oddly they only sell them as singles. Maybe they’re also compatible with a single pipe? There’s not much info on the V&H site either. Not sure but it seems like they should be sold in pairs.