FASS or AirDog? - Duramax Lift Pump Install

แชร์
ฝัง
  • เผยแพร่เมื่อ 10 ม.ค. 2025

ความคิดเห็น • 265

  • @NobbiesGnomeRescue
    @NobbiesGnomeRescue 9 หลายเดือนก่อน +34

    Ive got an Air Dog sat on my dinning table, I’m starring at it and the the wife and kid are starring at me. None of us were happy, until we watched your video… wife said “well, I suppose you can do it and we will get our @#^%ing dinning table back then”. My daughter said “daddy can I help”..?
    So thanks for making a video that makes it look fun for my kid…… she’s probably just going to bring me some snacks and ask me to play Mario Cart, but she’s 9, so I’m flattered 😊

    • @freedomworx
      @freedomworx  9 หลายเดือนก่อน +6

      She can help you find the 10mm when you lose it 😂

    • @ondago2
      @ondago2 7 หลายเดือนก่อน +1

      Man take that love and that experience If a kid wants to help and especially a daughter I had one and she ended up going to engineering school following in my footsteps but if she wants to be there and said she if she's going to get snacks and ass to pay Mario kart or get a wrench or get you a drink or whatever dude enjoy it cherish it man.

  • @FASSFuelSystems
    @FASSFuelSystems 11 หลายเดือนก่อน +31

    We appreciate your business, and hope you love the system!

    • @freedomworx
      @freedomworx  11 หลายเดือนก่อน +5

      Thank you much. 👍. It’s doing its job thus far. 👌

  • @ondago2
    @ondago2 7 หลายเดือนก่อน +11

    You didn't make this video until a few months after I had installed my first ever lift pump I ever seen even first diesel truck but I got to say in retrospect I think yours is the best of the videos that I've seen. First off besides being thorough about what to do and why you injected some humor and fun and it made it actually cool to watch through even though I've now, done it.

    • @freedomworx
      @freedomworx  7 หลายเดือนก่อน

      Sorry it didn't help you, but i'm glad you liked it 👍

  • @tom58792
    @tom58792 9 หลายเดือนก่อน +5

    Baldwin filters are very good.I used them on the ranch for 20 years

    • @freedomworx
      @freedomworx  9 หลายเดือนก่อน +1

      Yep. They make good stuff.

  • @johnnyfever2
    @johnnyfever2 11 หลายเดือนก่อน +6

    great video! i ordered a FASS pump today and plan on following your procedures! your video is the best procedure ive seen on youtube! my 2008 w/160k is having fuel issues possibly due to vacuum loss from worn seals hoses etc. i agree completely with the need for a lift pump for the high pressure pump feed. makes perfect sense as many diesels have! not sure why duramax didnt use lift pumps on some systems! thanks for this great install video and helpful and interesting information.

    • @freedomworx
      @freedomworx  11 หลายเดือนก่อน +1

      I’m glad you enjoyed it. Hope it makes it go quicker for you than me 😂

  • @markthomas4083
    @markthomas4083 3 หลายเดือนก่อน +3

    Great video sir. Your sense of humor is appreciated. Can’t wait to be on the finished/completed side of this install.

    • @freedomworx
      @freedomworx  3 หลายเดือนก่อน

      Glad you liked it 👍

  • @markthomas4083
    @markthomas4083 2 หลายเดือนก่อน +1

    8:20 minute mark, or close to it… spied an awesome round, it’s half of a century. I am sore from so many ups and downs, under the truck, to back standing up. My Jimmy has a cool aftermarket fuel tank, Transfer Flow 45 gallon. Had to lower this aftermarket tank to allow access to the quick release fuel connection. This video is much more thorough than all others for this yob. The sense of humor is appreciated on this video.

    • @freedomworx
      @freedomworx  2 หลายเดือนก่อน

      I'm glad you enjoyed it 👍

  • @markthomas4083
    @markthomas4083 3 หลายเดือนก่อน +3

    This is the best video I’ve seen on the Fass install! Thank you so much.

    • @freedomworx
      @freedomworx  3 หลายเดือนก่อน +1

      Glad you enjoyed it 👍

    • @markthomas4083
      @markthomas4083 3 หลายเดือนก่อน

      @@freedomworx I had to stop the install last night. Electric is complete for the most part. Will connect the hoses in the next hour. The ingoing and outgoing horses was a complicated task. Will view your video for the fourth time. 🤣😌🇺🇸🇺🇸

  • @kevenhiemie
    @kevenhiemie ปีที่แล้ว +6

    A PPE power centrifuge oil filter that mount to the top of the engine, for easy serviceability, would really help keep that engine clean and living a long time.

    • @freedomworx
      @freedomworx  ปีที่แล้ว +1

      I had to look that one up. 👍

  • @Adam-nv9zo
    @Adam-nv9zo ปีที่แล้ว +6

    I love your pointer. It's so practical. Im gonna have to get me one like it asap.

    • @freedomworx
      @freedomworx  ปีที่แล้ว +4

      Amazon or steal it of an A-10. 😉

    • @Adam-nv9zo
      @Adam-nv9zo ปีที่แล้ว +5

      @freedomworx I'm sneaking up on an A-10 right now. If you never see me comment again, you can assume that I wasn't sneaky enough.

    • @freedomworx
      @freedomworx  ปีที่แล้ว +2

      @Adam-nv9zo 😂

    • @johnnyfever2
      @johnnyfever2 11 หลายเดือนก่อน +2

      ditto on the pointer!!

  • @clr1001
    @clr1001 2 หลายเดือนก่อน +1

    i've watched your video multiple times before unboxing and doing the install, by using your instructions compared to the factory instructions i was able to save myself some headaches, great video, thank you

    • @freedomworx
      @freedomworx  2 หลายเดือนก่อน

      I’m glad I could help. Didn’t want others to go through what I did 👍

  • @adangonzalez9622
    @adangonzalez9622 4 หลายเดือนก่อน +9

    Air dog also doesn’t have a bypass circuit if the motor or the pump itself fails and leaves you stranded. Fass does, therefore if the pump fails, you can still pump fuel with the CP3 and limp to town, home, or shop.

    • @freedomworx
      @freedomworx  4 หลายเดือนก่อน +1

      That's interesting. I have someone tell me that their FASS failed but they were able to keep driving 👍

    • @barrydesmore5629
      @barrydesmore5629 2 หลายเดือนก่อน +2

      I have driven my truck with fuse removed, on accident, for a few days till notice the truck fell on its face under hard acceleration. U can drive under normal conditions with the air dog 165 with no power. Have done it more than once.

    • @PaulMcClellanmn
      @PaulMcClellanmn 2 หลายเดือนก่อน

      Are you sure? I have an air dog and due to ice buildup the wiring harness pulled apart and I did not even realize my air dog was offline until the next day when I drained water separate and it would not re-prime

    • @PaulMcClellanmn
      @PaulMcClellanmn 2 หลายเดือนก่อน +3

      ​@@freedomworxmy air dog failed and I was able to drive 250 miles home on just the CP,3

  • @markthomas4083
    @markthomas4083 3 หลายเดือนก่อน +1

    I also appreciate the advice given per wiring the ground and hot wire.

    • @freedomworx
      @freedomworx  3 หลายเดือนก่อน +1

      Glad you got something out of it 👍

  • @rbyronson2426
    @rbyronson2426 ปีที่แล้ว +4

    I’m still in the process of saving my money to get 1. And thanks again for the laughs throughout the video.

    • @freedomworx
      @freedomworx  ปีที่แล้ว +1

      I appreciate you watching 👍

  • @davidt7838
    @davidt7838 3 หลายเดือนก่อน +1

    Grwat video on the FASS install. The instructions that come with it are hot steaming garbage. Very informative with the right level of humor. Thank you.

    • @freedomworx
      @freedomworx  3 หลายเดือนก่อน

      Glad you got something out of it 👍

  • @clintbrock8052
    @clintbrock8052 3 หลายเดือนก่อน +2

    I have the same year truck. I used that WCFab bracket. I like the bracket better than the one that comes with the kit. Then i bought that 63 gallon tank from S&B and had to move the bracket again to the outside of the frame. I still like it better than the on that came with the kit

    • @freedomworx
      @freedomworx  3 หลายเดือนก่อน

      I looked at that bracket. Can’t remember why I decided to build my own instead.

  • @flyinbrianz22
    @flyinbrianz22 4 หลายเดือนก่อน +1

    This is the best video I've seen on this install....well done!

    • @freedomworx
      @freedomworx  4 หลายเดือนก่อน +1

      Thanks for watching 👍

  • @Webedunn
    @Webedunn 10 หลายเดือนก่อน +2

    GREAT VIDEO! You are a likable fella to begin with, love the subtle sarcasm. It makes for an easier watch. You should go into content creation, you have the right personality.
    Anyway, thank you for this video bc it’s been far more useful than any others and you made it more enjoyable, GOOD JOB!

    • @Webedunn
      @Webedunn 10 หลายเดือนก่อน

      I mean content creators like story teller like Mr. Ballen or Why Files. They’re PAID in the shade….

    • @freedomworx
      @freedomworx  10 หลายเดือนก่อน +1

      I appreciate the kind words. I've been making content like this for a few months now, and it's working out pretty well. Not ready to quit my day job yet, but enjoying learning the process 👍

  • @CaptK-py8rq
    @CaptK-py8rq ปีที่แล้ว +4

    Good video, thanks. I bought the FASS for my 2004 Chevy 6.6 Duramax, I liked the 5/8" long sweep tube in the pump opposed to the smaller 1/2" 90-degree tight bend on the Air Dog. Bought the filter delete from FASS but it would not stop leaking, had to take it off, put a new filter and housing on instead, now I have a nice aluminum filter delete paperweight I can't do squat with. Anyone else have that problem with the filter delete not working?
    I increased my highway mileage about 1.5 -2 mpg. I typically get around 27-28 mpg on the highway empty and hauling around 22 mpg, depends on the ambient temp. I'm all stock on my 2004 dually crew cab so I installed the 100 series, just turned over 112,120 miles when I got the safety inspection the other day. I highly recommend everyone do this for your diesels. It's $700 well spent.
    I always buy new trucks and take care of what I have. Still have a 1992 Ford F-350 dually crew with the 7.3 and 5 speed manual.

    • @freedomworx
      @freedomworx  ปีที่แล้ว +8

      27 MPG? You driving downhill the entire time?

    • @robertkenney-oles5948
      @robertkenney-oles5948 ปีที่แล้ว +2

      My 04 LLY can also pull mid 20's if I am careful, also a crew cab dually with a mild tune@@freedomworx

  • @cliftonsr
    @cliftonsr ปีที่แล้ว +4

    I guess you could buy that fitting that Fass uses to go to the suction line and put it into the plumping of the AirDog setup and you could do the same bypass the lift pump scenario if you had the lift pump fail to take it out of the system loop.

  • @fatboyrob95
    @fatboyrob95 ปีที่แล้ว +4

    I ran the filter bowl delete from FASS pitch wasn’t the same as the housing had to use a strap wrench to tighten to stop leak. Had work in cold weather and started to leak till it warmed up. Ended up just running the housing delete. Tried two different filter bowl deletes same issue.

    • @freedomworx
      @freedomworx  ปีที่แล้ว +5

      I bought an XDP Filter delete. We’ll see how it goes.

  • @stans5270
    @stans5270 ปีที่แล้ว +1

    Good call on the hard spiral wrap.
    At 17:34 it shows the hose going right against 3 layers of body sheet metal. I would add more protection in areas like that against chaffing by installing a stainless steel hose clamp over the wrap so that the sheet metal rubs against the hose clamp and not the wrap. At 650GPM, that pump would empty your tank before you could shut off the engine. At over $5 per gallon, better safe than sorry.

    • @freedomworx
      @freedomworx  ปีที่แล้ว +2

      Gallon Per Hour 😉

    • @stans5270
      @stans5270 ปีที่แล้ว +1

      @@freedomworx Oops.

  • @Blue_Collar_Hunter
    @Blue_Collar_Hunter 6 หลายเดือนก่อน +1

    I have a 2011 LML I installed this same pump on, w/ the WC Fab mount, using CAT filter, I also installed a sump pump on the bottom of the tank and did a fuel filter bypass delete under the hood removing the original fuel filter assembly. Everything works like a champ. I did that a couple years ago but saw this video and had to check it out.

    • @freedomworx
      @freedomworx  6 หลายเดือนก่อน +1

      Yeah, the factory system is not the best design. It was almost good enough.

    • @tylerstensland3338
      @tylerstensland3338 2 หลายเดือนก่อน

      I have a 2011 also fully deleated , just did my fass today yeeehawww

  • @LBZOverlander
    @LBZOverlander 8 หลายเดือนก่อน +1

    Nice video! You and your grandpa have great taste. 06 duramax and the excursion, best of both worlds.

    • @freedomworx
      @freedomworx  8 หลายเดือนก่อน

      Don't hate me, but I've got a Cummins or two also 😂. Great engine, junk truck.

  • @paveltolz6601
    @paveltolz6601 7 หลายเดือนก่อน +2

    I've had the AirDog 165 II on my 96 GM 6.5L since 2013. The truck is happier with it than the OEM. Even the OEM 1994 LP which was supposedly a little better.
    Mine was gifted having been on two previous trucks since 2008. Customer service was great as I chose to go with new hoses vs. the already twice cobble up ones I recieved. Clear instructions and I'm not intuitive though I had to adapt because at the time, there wasn't a kit for the 6.5 motor equipped trucks (They do now). The pump motor failed after four years later (guess I'm part of another 1% group [Veteran) and, again, customer service was great. Sold me a new motor only and for a low price and I was able to repair the system in short order. The truck was off line until last year and I just reinstalled the AirDog. Again, the truck is much happier and I plan to leave it in.

    • @freedomworx
      @freedomworx  7 หลายเดือนก่อน

      Sounds like AirDog takes care of their people 👍

  • @DaleEarnhardtfan420
    @DaleEarnhardtfan420 ปีที่แล้ว +3

    great video and explanation in the beginning

    • @freedomworx
      @freedomworx  ปีที่แล้ว

      Thanks for watching. I hope it helps you 👍

    • @johnnyfever2
      @johnnyfever2 11 หลายเดือนก่อน

      agree 100%

  • @raulduron9908
    @raulduron9908 6 หลายเดือนก่อน +1

    Really good video. Thank you for taking your time to make these videos.

    • @freedomworx
      @freedomworx  6 หลายเดือนก่อน

      I appreciate it. Thanks for watching 👍

  • @white24valve
    @white24valve 8 หลายเดือนก่อน +1

    New subscriber!! Have a 381,000 plus mile LLY.Recieved new Bosch injectors and a Fass 100 today. I have always bought the 150 or 165pump and truck would start loping a little. Soni would have to remove the ball ans spring and cut 1 to 1 and half coil off of the spring to lower the psi sent to the engine. Duramaxs like to see about 5 to 7 psi without the loping issue! Awesome video!!

    • @freedomworx
      @freedomworx  8 หลายเดือนก่อน

      Thanks for the support. Yeah, some Duramax engines are more picky about lift pump pressure than others. My LBZ idles just fine though 👍

  • @nelsonhernandez6311
    @nelsonhernandez6311 5 หลายเดือนก่อน +1

    great video brother. I'm saving it for my install next week.

    • @freedomworx
      @freedomworx  5 หลายเดือนก่อน

      I’m glad you got something out of it 👍

    • @nelsonhernandez6311
      @nelsonhernandez6311 5 หลายเดือนก่อน

      @@freedomworx when you say you fill the pump with WD40 overnight, how much WD40 did you use, and I'm assuming you dump it out the next day?

    • @freedomworx
      @freedomworx  5 หลายเดือนก่อน

      @nelsonhernandez6311 its just to prelude the pump. And no, I dont pour it out. The engine will eat it.

  • @BustedKnuckleVideo
    @BustedKnuckleVideo ปีที่แล้ว +3

    Nice how to. 👍

    • @freedomworx
      @freedomworx  ปีที่แล้ว

      Talking too much is my super power. 🤓

  • @legionofanon
    @legionofanon 11 หลายเดือนก่อน

    On your back working above your face, like at 11:24 i would also add a face shield. I can't count how much dirt that has still ended up in my eyes even with safety glasses on, and a face shield just deflects it all. Even the super cheap like $6 one at harbor freight is totally worth it

    • @freedomworx
      @freedomworx  11 หลายเดือนก่อน

      Yeah it would have been nice. That was rough.

  • @FORGETYOU8
    @FORGETYOU8 10 หลายเดือนก่อน +1

    That was a very good explanation thank you

    • @freedomworx
      @freedomworx  10 หลายเดือนก่อน

      I'm glad you got something out of it 👍

  • @Peak_Precision
    @Peak_Precision ปีที่แล้ว +3

    Prime the pump and party 👊
    Great videos 👍

    • @freedomworx
      @freedomworx  ปีที่แล้ว +1

      Glad you enjoy them 👍

    • @johnnyfever2
      @johnnyfever2 11 หลายเดือนก่อน

      yes he is a cool and funny guy. great personality! love his video! party on!!

  • @ScottFanello
    @ScottFanello ปีที่แล้ว +2

    FYI... I've had my pump blow a fuse a few times in -20 degree weather due to gelling... cp4 still managed to draw fuel from the tank through the FASS.

    • @freedomworx
      @freedomworx  ปีที่แล้ว +1

      Interesting. That’s good to know 👍

    • @Thecalmthefuckdownchannel
      @Thecalmthefuckdownchannel 9 หลายเดือนก่อน

      BD makes a fuel heater for airdogs, which I think fits fass too. Worth it if you live in a cold climate

    • @travismidlam3853
      @travismidlam3853 8 หลายเดือนก่อน

      @@Thecalmthefuckdownchannelfass makes their own brand of fuel heater element

  • @a.americandad3885
    @a.americandad3885 2 หลายเดือนก่อน

    Always great quality content.

    • @freedomworx
      @freedomworx  2 หลายเดือนก่อน

      I appreciate it 👍

  • @elvispusley3515
    @elvispusley3515 27 วันที่ผ่านมา

    I have had a Fass Titanium 95 for 12 years no issues. I have 50 hp over stock DD’ s and it runs great. Change filters every 30K +/-. A fuel pump pressure gauge is nice for a baseline psi as well as for filter check.

    • @freedomworx
      @freedomworx  26 วันที่ผ่านมา

      I have a fuel supply pressure gauge for my Edge CTS3, I just haven't installed it yet 👍

    • @elvispusley3515
      @elvispusley3515 26 วันที่ผ่านมา +1

      @ I just have a mechanical under the hood and made a little mount.

  • @BuildSomethingAuto
    @BuildSomethingAuto 3 หลายเดือนก่อน +1

    Diesel eats white teflon tape by the way, learned that lesson the hard way on my cummins swap. Chances are if you take those fittings apart the tape will be all stringy and in little pieces, at least mine was. Good ol' fashioned pipe dope seems to be the ticket for diesel fittings.

    • @freedomworx
      @freedomworx  3 หลายเดือนก่อน

      I use Gasoila an all my fittings that touch petroleum products. amzn.to/3MPq92z

    • @joeyjordan1209
      @joeyjordan1209 28 วันที่ผ่านมา +1

      Blue monster tape is good for fuel lines

  • @travenstokes
    @travenstokes 9 หลายเดือนก่อน +1

    Those magnetic mounts are awesome. Glad I watched the whole video😂

    • @freedomworx
      @freedomworx  9 หลายเดือนก่อน

      Yep. I just got a fresh pack from Amazon yesterday 😎

  • @ronaldbabbitt6318
    @ronaldbabbitt6318 10 หลายเดือนก่อน +1

    Great info! Lift pump 💪 ⚒️🤠

    • @freedomworx
      @freedomworx  10 หลายเดือนก่อน +1

      Thanks for watching 👍

  • @markthomas4083
    @markthomas4083 2 หลายเดือนก่อน +1

    17:57 was confusing. I am still struggling. So the lone brass nipples towards the rear tires do not go to the fuel tank filler part, the unpainted “y” on the fuel fill line, near gas cap?

    • @freedomworx
      @freedomworx  2 หลายเดือนก่อน +1

      The fitting on the rear is the supply from the tank. The fittings in the front are the feed to the engine, and the return to the filler neck.

    • @markthomas4083
      @markthomas4083 2 หลายเดือนก่อน

      @@freedomworx thank you sir. Did I mention I wear a helmet 24/7? Haha. Was on the phone w Fass. Hung up bc the line went silent, then your comment came in. Thank you! Your video is a lifesaver for me. I wrapped all fuel and electric lines w Gorilla tape. When decomposing yesterday, I took a lighter to a piece of Gorilla tape, did not ignite. Anyway, thanks again for the video. Your 50 cal pointer was cool. Can’t wait to fire the GMC up. But unfortunately, I have to run in to Fernley to purchase more fuel hose and a union to splice and connect. My truck has an add on fuel tank, 45 gallon Transfer Flow; cannot reach the fuel connection above the tank. Dropped it and attached it per access to the fuel line, red quick release fuel line. What a task. It will pay off later today. Ugh.

    • @freedomworx
      @freedomworx  2 หลายเดือนก่อน +1

      @@markthomas4083 glad you got it figured out. But it’s a 1.18 Cal (30mm) round. 😉

    • @markthomas4083
      @markthomas4083 2 หลายเดือนก่อน +1

      @@freedomworx the 05 is running smoothly. The cab is more quiet inside, can’t seem to follow the logic behind this, but the interior seems significantly more quiet. The engine is more smooth as well. I put my foot in it hard, barely any coal visible. Can accelerate to 80 mph quicker. Your video helped a lot. Thank you for walking me thru it, per my comments/answering them sir. I used Gorilla Tape to wrap all electric and fuel lines, flame resistant. I think the fuel mileage increased about one mpg average. 65 mph with a slight head wind gave 19.5 mpg.

    • @freedomworx
      @freedomworx  2 หลายเดือนก่อน +1

      I’m glad it all worked out for you. And glad I could help 👍

  • @sempergumby8734
    @sempergumby8734 4 หลายเดือนก่อน +2

    Been runnig Fass on my lbz for 4 years now. No problem

    • @freedomworx
      @freedomworx  4 หลายเดือนก่อน

      This truck is with me until I die, so we’ll see if I need to exercise that warranty or not 😎

  • @austinadams7690
    @austinadams7690 5 หลายเดือนก่อน +3

    Take a drink every time he says pump!

    • @freedomworx
      @freedomworx  5 หลายเดือนก่อน +1

      Pump pump pump pump pump pump pump pump pump pump pump pump pump pump pump pump pump pump pump pump pump pump pump pump pump pump pump pump 🍻

  • @randyolson415
    @randyolson415 9 หลายเดือนก่อน

    I run Baldwin filters,and I did have water in my system, I only noticed it when it froze up in the below zero weather,I have since put a heater on,fast sells it.never had an issue,I always check the fuel water separate when it is warmed up and shut off.drain into a clear cup and let it set.peace of mind

    • @freedomworx
      @freedomworx  9 หลายเดือนก่อน

      Yeah we don't have to worry about freezing fuel here in Georgia. If it's ever that cold here, we just shut down.

  • @markthomas4083
    @markthomas4083 2 หลายเดือนก่อน +1

    The LBZ runs much smoother, noticeable increase in mpg around town. Worth every penny.

    • @freedomworx
      @freedomworx  2 หลายเดือนก่อน

      The only thing that increases my MPG is driving at a dangerously slow speed 🤓

  • @TonyReilly-mt7uu
    @TonyReilly-mt7uu 8 หลายเดือนก่อน

    Great info, thanks. Interested to find out how the Baldwin filters work with the FASS system.

    • @freedomworx
      @freedomworx  8 หลายเดือนก่อน

      I’m sure they fill work fine. Unless FASS decides to start sponsoring me, I’ll probably be switching when it’s time to change them out 😉

  • @t.l.robinson2162
    @t.l.robinson2162 9 หลายเดือนก่อน

    I run an Air Dog because I know a few people who have had problems with Fass filters . I've known a few trucks that has had their lift pumps stolen. I always mount lift pumps where they can't be seen unless you are under the truck.

    • @freedomworx
      @freedomworx  9 หลายเดือนก่อน +4

      Folks steeling lift pumps? What’s the world coming to 😂😂

  • @2015_Rubicnn
    @2015_Rubicnn 10 หลายเดือนก่อน

    I recommend the Fleece sending unit for the lift pump. I think the Airdog has a better laid out kit, and the mounting location is on the inside of frame.

    • @freedomworx
      @freedomworx  10 หลายเดือนก่อน

      The Fleece system is good. A just wanted the filtration and pump all in one package.

    • @2015_Rubicnn
      @2015_Rubicnn 10 หลายเดือนก่อน +1

      @@freedomworx I'm talking about the sending unit, not the lift pump version.

  • @ardennielsen3761
    @ardennielsen3761 3 หลายเดือนก่อน

    those Italian marine lift pumps also work, can switch them off to and the injector pump still pulls fuel past them... two of them 7.4GPM is not 10.4GPM tho 60psi of lift blows out any air. adds pressure regulator on the fuel return line vs modifying injection pump... 60psi past what the injection pump does normally.

    • @freedomworx
      @freedomworx  3 หลายเดือนก่อน

      MY injector pump only wants around 10psi.

  • @9856CB
    @9856CB หลายเดือนก่อน

    I’ve had my FASs on my 2006 Duramax since the 95 gal/minute flow. Only had to rebuild my primer twice in this many years and get better than 20mpg on flat highway. Only difference is the noise, but can’t hear while driving.👍

    • @freedomworx
      @freedomworx  หลายเดือนก่อน

      That noise just lets you know that it's working 😂

  • @freshplasticup5795
    @freshplasticup5795 3 หลายเดือนก่อน +1

    This is a guy that I could party with.

  • @David-dm4re
    @David-dm4re 4 หลายเดือนก่อน

    I installed my FASS system when I got my 2012 GMC. I also installed a tank sump to clean it up for return and complete fuel use (in case the gauge goes stupid). Put a fuel filter (billet) delete at the motor. Working great. Change filter and separator every other oil change (cheap insurance). I heard a DF delete, 3 stage tuner and straight exhaust is available. 🙄 someplace. Not sure.

    • @freedomworx
      @freedomworx  4 หลายเดือนก่อน

      Deletes…never heard of that 😉

    • @13noes
      @13noes 4 หลายเดือนก่อน

      Did you have and engine lights come on after installing the fass and sump? I installed on my 2013 gmc and now have a fuel rail sensor on wasnt sure if you had the same problem

  • @brycebilyeu5832
    @brycebilyeu5832 หลายเดือนก่อน

    For me I would get the long start/failure to start when I park on an incline. The air floats up into the top end and prevents the start. have to prime and bleed to get a start which is still difficult.
    doing an airdog soon. thanks for the video

    • @freedomworx
      @freedomworx  หลายเดือนก่อน

      Yep. You might need a lift pump 😂

  • @travis1572
    @travis1572 10 หลายเดือนก่อน

    Great video thanks
    Going to give it a shot

    • @freedomworx
      @freedomworx  10 หลายเดือนก่อน

      Thanks for watching 👍

  • @garykortus6260
    @garykortus6260 6 หลายเดือนก่อน

    This was the best video on installing a lift pump, thanks. Do you have one on replacing cooling lines from the transmission?

    • @freedomworx
      @freedomworx  6 หลายเดือนก่อน

      Fortunately, I haven’t needed to replace them yet.

  • @AyyItsJk
    @AyyItsJk ปีที่แล้ว +3

    Used this when installing mine last night. Went beautifully. Have you had any issues with 1/4 tank and it not priming? Heard it’s hit or miss

    • @freedomworx
      @freedomworx  ปีที่แล้ว +2

      I haven’t had an issues since installing the lift pump. Had some before.

    • @precisetransportltd.7254
      @precisetransportltd.7254 10 หลายเดือนก่อน

      Yep I have an air dog and sure as shit dobern stranded a few times on my dodge 2500 now I'm installing one on my duramax so I guess we'll see on that aspect

  • @JamesGuthrie-eh5pz
    @JamesGuthrie-eh5pz 5 หลายเดือนก่อน +1

    My truck keeps losing prime and fuel gauge is like you described. I installed a new Fuel filter housing. What can I do without installing one of these? Thanks for information.

    • @freedomworx
      @freedomworx  5 หลายเดือนก่อน +1

      If I knew that, I wouldn’t have installed one myself 😉

  • @danieljones8587
    @danieljones8587 7 หลายเดือนก่อน +1

    Good job! 👊

    • @freedomworx
      @freedomworx  7 หลายเดือนก่อน

      Thanks for watching 👍

  • @416cubes4
    @416cubes4 3 หลายเดือนก่อน

    That’s one hell of an inheritance

    • @freedomworx
      @freedomworx  3 หลายเดือนก่อน

      Well he actually left it to my mom. I bought it from her. So it didn't just fall into my lap 😉

  • @shaunthepyrotek5159
    @shaunthepyrotek5159 ปีที่แล้ว

    Love your X man looks real nice I got 2 of them too.

    • @freedomworx
      @freedomworx  ปีที่แล้ว

      I appreciate it. There is a full build series on the Busted Knuckle Films channel. th-cam.com/video/Mq36IlPpRko/w-d-xo.html

  • @johnforsyth8414
    @johnforsyth8414 21 ชั่วโมงที่ผ่านมา

    Will the Fass system work on a 2012 Chevy Silverado 3500 with a Duramax 6.6L engine?

  • @robertkenney-oles5948
    @robertkenney-oles5948 ปีที่แล้ว +1

    Rust belt guys DEFINITELY need to use a good amount of anti-seize on the mounting bolts if they ever hope to get it apart ever again.

    • @freedomworx
      @freedomworx  ปีที่แล้ว

      I couldn't live that rust belt life. I'm used to trucks lasting 40 years before they rust.

  • @skylersmall6322
    @skylersmall6322 2 หลายเดือนก่อน

    I can confirm the high blood pressure part. About to blow a gasket myself!

    • @freedomworx
      @freedomworx  2 หลายเดือนก่อน

      Yeah, pretty aggravating process.

  • @SubePelayo928
    @SubePelayo928 7 หลายเดือนก่อน +1

    I have an air dog 165 on my truck currently. It’s been on there for about 9’years now and it’s finally slowing down. I bought a FASS100 and have yet to install it. What are the ports capped by the red plugs? Is not necessary to remove the caps and plug them?

    • @freedomworx
      @freedomworx  7 หลายเดือนก่อน +1

      Those are heater ports. Coolant would flow through them if they were In use. It’s just an open cavity, so the plastic plugs are fine.

  • @cdurkinz
    @cdurkinz 4 วันที่ผ่านมา

    curious why we don't have this stuff on gas engines, I get the fuel pressures are different but seems like it could still be beneficial to have the cleanest fuel possible.

    • @freedomworx
      @freedomworx  3 วันที่ผ่านมา +1

      Diesels have smaller injector orifices and much higher injector pressures. So the smallest particle or bit of water can damage the fuel system on a diesel.

  • @SkyzBlazed
    @SkyzBlazed 3 หลายเดือนก่อน

    Not sure if the FASS has it but my AirDog has a flow thru system, if the AirDog dies for whatever reason it will still pull fuel through the system and run just fine. :)

    • @freedomworx
      @freedomworx  3 หลายเดือนก่อน +1

      I’ve heard that the FASS will allow fuel to pass, but I haven’t verified it.

    • @SkyzBlazed
      @SkyzBlazed 2 หลายเดือนก่อน

      @@freedomworx The video I watched from a few years ago said they didn't at the time. Very well could have changed since then. Seems like a good change to make.

  • @roycelovato7425
    @roycelovato7425 15 วันที่ผ่านมา +1

    The air dog i have on my LML went out after 26k miles n they won't replace under their warranty

    • @freedomworx
      @freedomworx  15 วันที่ผ่านมา

      What was their excuse for not warrantying it?

    • @roycelovato7425
      @roycelovato7425 15 วันที่ผ่านมา

      @freedomworx they said since I bought it from the utuber truck master they didn't sell it directly to me I'd have to contact him

    • @roycelovato7425
      @roycelovato7425 15 วันที่ผ่านมา

      Trying to get n touch with them is impossible I have even left comments on his channel with no way to make it right he's full of excuses 2

    • @roycelovato7425
      @roycelovato7425 15 วันที่ผ่านมา

      Guess just out 800$

    • @freedomworx
      @freedomworx  15 วันที่ผ่านมา

      Yeah, I know that FASS has a clause that you have to buy from them or an authorized retailer to make the warranty valid. And you have to register it with them within 30 days of purchase. This was my grandad’s truck, so I’ll never get rid of it. I’ll probably get an opportunity to exercise that warranty at some point.

  • @chunkyharper9467
    @chunkyharper9467 ปีที่แล้ว

    I wonder if putting a shop vac into the fuel fill would create enough vacuum to keep that fuel cooler hose from leaking with a fill tank?

    • @freedomworx
      @freedomworx  ปีที่แล้ว +1

      Might be enough to implode the tank 😂😉

  • @genecarr4568
    @genecarr4568 2 หลายเดือนก่อน

    I understand the fuel return spool with angled pipe needs to pointed at the tank, makes sense. But what about the orientation of the angled fuel return pipe? Does it need to be at the top (12 oclock) position or can it be at a right angle (90 or 180 degree) positions. Also you mention they have the filter arranged with 2 micron first and 40 microns second. Are these interchangeable and can they be installed in reverse (40 microns first and 2 microns second)?

    • @freedomworx
      @freedomworx  2 หลายเดือนก่อน

      I don’t think it matters how you clock the nipple on the return spool. Mine is pointed toward the rear of the truck. And for the filters, the thing that is unique about the FASS filters is that the water separator is incorporated into the fine filter (2 micron) instead of the primary filter (144 micro ). You can’t interchange them. The pump pushes through the 2 micron filter. If you put that filter before the pump, the pump would have to suck fuel through it. You’d end up with cavitation and not enough flow. The primary filter (144 micron) protects the pump from debris, but still flows enough to not cause cavitation or flow issues. The secondary filter (2 micron) protects everything else downstream like the CP3 and injectors.

    • @genecarr4568
      @genecarr4568 2 หลายเดือนก่อน

      @@freedomworx Ok I guess I missed that. So the fuel goes through the 144 micron filter first to protect the pump and then the 2 micron filter is second going to the engine?

    • @freedomworx
      @freedomworx  2 หลายเดือนก่อน

      @ yep 👍

  • @ronaldbabbitt6318
    @ronaldbabbitt6318 10 หลายเดือนก่อน

    Hey brother the Air Dog 4G 165gph has a bypass ✔️it can be off and still allows fuel to flow as normal without lift pump 👍🤠

    • @freedomworx
      @freedomworx  10 หลายเดือนก่อน +1

      That’s good to know. Hopefully I’ll never have to find out 😎

  • @stevenm.hollis4429
    @stevenm.hollis4429 8 หลายเดือนก่อน

    Great video. I own a 5.9 Cummins. But this was helpful. By the way I like your excursion nice rig. Again keep up the good work… Cheers

    • @freedomworx
      @freedomworx  8 หลายเดือนก่อน

      I appreciate it. I’ve got some 5.9 content coming up. Working on it right now. 👍

    • @stevenm.hollis4429
      @stevenm.hollis4429 4 หลายเดือนก่อน

      You know… there was one question I wanted to ask… Are you familiar with the fleece in tank left pump? I think it’s called a power flow. I know I need to put a lift pump on… However I’m debating whether to put one on the rails or in the tank. Your thoughts now that you have one installed. Again appreciate the video

    • @freedomworx
      @freedomworx  4 หลายเดือนก่อน

      @stevenm.hollis4429 there are pros and cons to each. The thing I like about the external units provide easier service to the pump and provide for more filter capacity. The main reason OEMs put them in the tank, is noise reduction.

    • @stevenm.hollis4429
      @stevenm.hollis4429 4 หลายเดือนก่อน

      @@freedomworx Thanks for your fast response I appreciate it. I’ll let you know what I decide. Couple of my diesel France have said to put in the fleece sending unit along with putting a lift pump on the rail. They also said I could leave the original fuel bowl on for X extra filtration. I guess you mentioned before the main reason is to keep that CP3 pump happy With whatever you choose.

  • @adam874
    @adam874 หลายเดือนก่อน

    Any updates on this? How do you feel about it today?

    • @freedomworx
      @freedomworx  หลายเดือนก่อน

      Truck cranks and drives. Not much else to say about it. No measurable change in fuel economy, if that’s your goal.

  • @pedalharder8520
    @pedalharder8520 9 หลายเดือนก่อน

    I love this guy! I wish he was my neighbor we’d drink a lot of beer together!

    • @freedomworx
      @freedomworx  9 หลายเดือนก่อน

      I will take a drink 😎🍻

  • @robertdimambro6241
    @robertdimambro6241 8 หลายเดือนก่อน

    I run twin Kennedy lift pumps. 600 RWH and no issues.

    • @freedomworx
      @freedomworx  8 หลายเดือนก่อน

      Honestly never heard of them until you brought them up. 👍

  • @Butch-x2x
    @Butch-x2x 4 หลายเดือนก่อน

    So I believe i heard you say the word BLEM . Do you know weather or not fass stocks several blems. Thanks

    • @freedomworx
      @freedomworx  4 หลายเดือนก่อน

      I’m not sure. I just know that there were some available when I was shopping.

  • @danieldilts7323
    @danieldilts7323 7 หลายเดือนก่อน

    Are you worried about the 1/4 tank and the pump runs dry? It happened to me - you can install a sump to eliminate that issue

    • @freedomworx
      @freedomworx  7 หลายเดือนก่อน

      That’s certainly an option. But I plan to make more power, so I went ahead and got a lift pump.

  • @solargarage
    @solargarage 4 หลายเดือนก่อน

    Looking good.

    • @freedomworx
      @freedomworx  4 หลายเดือนก่อน

      Thanks for watching 👍

  • @karlvancour5309
    @karlvancour5309 4 หลายเดือนก่อน

    2011 had a cp4 suck from the tank no lift pump

    • @freedomworx
      @freedomworx  4 หลายเดือนก่อน

      Did I say otherwise? I honestly can’t remember.

  • @martyakers2509
    @martyakers2509 6 หลายเดือนก่อน

    Ran across your video this morning. Great job! Where did you find a blem FASS?

    • @freedomworx
      @freedomworx  6 หลายเดือนก่อน

      Thanks for watching. They had some blems for sale on the website when I was looking. 👍

  • @Blackcloud_Garage
    @Blackcloud_Garage 9 หลายเดือนก่อน

    What is that hose clamp at 8:21? Thanks.

    • @freedomworx
      @freedomworx  9 หลายเดือนก่อน

      These: amzn.to/3TVUDCT

  • @dandable
    @dandable 9 หลายเดือนก่อน

    Is that 25MM or 30MM round you’re using as a pointer? I used to manage the medium cal procurement team for the Air Force.

    • @freedomworx
      @freedomworx  9 หลายเดือนก่อน

      30mm 😎

  • @jaffasoft8976
    @jaffasoft8976 10 หลายเดือนก่อน

    How do you know the psi it put up to the injection pump? If it needs ti be regulated can it regulate?

    • @freedomworx
      @freedomworx  10 หลายเดือนก่อน +1

      There is a regulator incorporated into the FASS assembly. It’s designed to be 8-10PSI.

    • @jaffasoft8976
      @jaffasoft8976 10 หลายเดือนก่อน

      That be cool. Probably just enough to help push my waste veg oil as regular VE type pump struggling but I shouldn’t put it under too much pressure sucking either.

    • @freedomworx
      @freedomworx  10 หลายเดือนก่อน

      It’s different depending on the application. A Duramax CP3 pump doesn’t like any more than that pressure. But the FASS system for a 12 Valve P-Pump motor is significantly higher than 10 PSI. Not sure about the VE systems though.

  • @moegreen5941
    @moegreen5941 4 หลายเดือนก่อน

    We don’t know yet but we are friends. Your version of infohumor is welcome here. A little lite on sailor vocab but that keeps it family friendly. I’ll be subbing. If we get enough likes and you wanted to buy an lml so you could teach me other things, well that would be great too. Until next time, adiós

    • @freedomworx
      @freedomworx  4 หลายเดือนก่อน

      I'm glad you enjoy my conetent. But yeah, If talked like I did in the Marine Corps, I'd get cancelled 😂

  • @xtremeboost7
    @xtremeboost7 10 หลายเดือนก่อน

    The fuse unkownly blew on my air dog, and my cummins continued to run for months.

    • @freedomworx
      @freedomworx  10 หลายเดือนก่อน

      Well that’s good to know 👍

  • @victorsidingguy4371
    @victorsidingguy4371 10 หลายเดือนก่อน

    Hello how much pressure should I put to the pump for lb7 2003?

    • @freedomworx
      @freedomworx  10 หลายเดือนก่อน

      I wouldn’t know. I’ve got an LBZ 😉. I take it on faith that FASS and AirDog set the pump pressure appropriate for the application.

  • @amandalabate2049
    @amandalabate2049 2 หลายเดือนก่อน

    I'm super unhappy with my fast fuel lift pump I purchased it for my 7.3 Shortly after purchasing it, they made an update and discontinued the fuel filters. So I can no longer replace them. And I've been running the same filters for nearly 10 years. They say they have a cross filter that will work. I've purchased that 1 and It will not prime. So yeah f fast fuel

    • @freedomworx
      @freedomworx  2 หลายเดือนก่อน

      There are plenty of filters out there that cross-reference and should work fine. If the primary won’t prime, just fill it with diesel before you screw it on.

  • @tedshantz6193
    @tedshantz6193 11 หลายเดือนก่อน

    in -20 u should b useing conditionet especaily in a cp4

    • @freedomworx
      @freedomworx  11 หลายเดือนก่อน

      I always run fuel supplement. But I’ll never go anywhere that’s -20 unless I’m kidnapped and taken there 😉

  • @FORGETYOU8
    @FORGETYOU8 10 หลายเดือนก่อน

    Does it come with the hoses as a kit

    • @freedomworx
      @freedomworx  10 หลายเดือนก่อน +1

      Yep. The only thing that didnt come with the kit was the hose wrap and magnetic zip tie holders I used.

  • @JT-qf4it
    @JT-qf4it 6 วันที่ผ่านมา

    I heard you say that your fuel additive disperses water in the fuel. That is not good. Water should be separated from the fuel so it can be removed by the filters. Water mixed into the fuel will, with time cause rust or corrosion in the fuel system and injectors.

    • @freedomworx
      @freedomworx  3 วันที่ผ่านมา

      The dispersed fuel is simply burned alongside the fuel. Fuel dispersants are pretty universal in diesel fuel treatments.

    • @JT-qf4it
      @JT-qf4it 2 วันที่ผ่านมา

      @@freedomworx That's true but water mixed with fuel is an emulsion and should not be burned. Water should be divided from the fuel so it can be removed by the water separator. A dispersant works against a water separator by breaking down water so it mixes with the fuel. I would not use any additive that uses a dispersant. You want the water to fall out of the fuel so it can be removed from the system.

  • @kumaragurusaravanan2248
    @kumaragurusaravanan2248 ปีที่แล้ว

    Which pump did you use for the truck?

    • @freedomworx
      @freedomworx  ปีที่แล้ว

      FASS 165

    • @kumaragurusaravanan2248
      @kumaragurusaravanan2248 ปีที่แล้ว

      @@freedomworx would both the fass and airdog work with gasoline (petrol) engines as well?

    • @freedomworx
      @freedomworx  ปีที่แล้ว +1

      @@kumaragurusaravanan2248 I’m not certain. I know,in general, gasoline pumps aren’t rated for diesel.

  • @JorgeMorales-ve4zi
    @JorgeMorales-ve4zi 10 หลายเดือนก่อน

    Did it improve fuel economy?

    • @freedomworx
      @freedomworx  10 หลายเดือนก่อน +1

      Nope 😂

  • @thebaycuddy
    @thebaycuddy 2 หลายเดือนก่อน

    What is a lift pump for??

    • @thebaycuddy
      @thebaycuddy 2 หลายเดือนก่อน

      To make sure no air goes into the fuel system?

    • @freedomworx
      @freedomworx  2 หลายเดือนก่อน +1

      A lift pump pushes fuel from the tank to the injection pump. Without a lift pump, the injection pump has to suck fuel from the tank. As the vehicle ages, it’s not uncommon to get air ingress (leakage) into the fuel lines, and the pump loses its prime. Then the truck won’t start or it takes a while to start.

    • @thebaycuddy
      @thebaycuddy 2 หลายเดือนก่อน

      @ can I use cat filters on those?

  • @DutchKC9UOD
    @DutchKC9UOD 2 หลายเดือนก่อน

    No you don’t leave a lift pump but it does help with leaking fuel lines

    • @freedomworx
      @freedomworx  2 หลายเดือนก่อน

      I needed a lift pump.

  • @randyolson415
    @randyolson415 9 หลายเดือนก่อน

    By the way mine is on a dodge 6.7.i have 125k on the pump.180k on the truck.

    • @freedomworx
      @freedomworx  9 หลายเดือนก่อน

      Very nice 👍

  • @t.l.robinson2162
    @t.l.robinson2162 2 หลายเดือนก่อน

    Either but I will NOT use Fass branded filters.

    • @freedomworx
      @freedomworx  2 หลายเดือนก่อน

      Not sure how I feel about their water removal technology. I prefer a standard primary filter with water separator in it myself.

  • @Djdjxhxjxj
    @Djdjxhxjxj 11 วันที่ผ่านมา

    Fass or air dog?

    • @freedomworx
      @freedomworx  11 วันที่ผ่านมา +1

      FASS is doing good so far 👍

  • @DutchKC9UOD
    @DutchKC9UOD 2 หลายเดือนก่อน

    For more HP you need more air not fuel! If you blow black smoke full throttle you need more air that is more unburned fuel and is nasty

    • @freedomworx
      @freedomworx  2 หลายเดือนก่อน

      The highest horsepower diesel blow tons of black smoke, unless they are running nitrous. If you aren't blowing black smoke, and you aren't running nitrous, you are leaving power on the table. You can't put enough turbo on a Diesel engine to clean up all the smoke, regardless of what Gale Banks tells you. The only way to get maximum power out of a diesel, and burn clean at the same time, is nitrous. If you don't understand that, I will be happy to explain the EGT, Smoke, Boost life cycle too you.

  • @truckerron
    @truckerron 11 หลายเดือนก่อน

    WHERE is the comparison to the AirDog??

    • @freedomworx
      @freedomworx  11 หลายเดือนก่อน

      It’s in there, you just have to listen 🤷🏻‍♂️. Filters and plumbing are the only real difference.

  • @smokeydexter6481
    @smokeydexter6481 20 วันที่ผ่านมา

    Cat filters are way superior to Baldwin. and pretty close to FASS

    • @freedomworx
      @freedomworx  20 วันที่ผ่านมา

      Well Cat actually makes their own filters, unlike most folks. They are good filters.

  • @rodjohnson3727
    @rodjohnson3727 8 หลายเดือนก่อน

    TRACY😂😂

    • @freedomworx
      @freedomworx  8 หลายเดือนก่อน

      Sexy Beast 😂

  • @DutchKC9UOD
    @DutchKC9UOD 2 หลายเดือนก่อน

    PS; take off the fuel cap tank is pressurized

    • @freedomworx
      @freedomworx  2 หลายเดือนก่อน

      I'm sure mine has a leak somewhere to vent that pressure. 😉