Jeep Wrangler & Gladiator Easiest OEM Auxiliary Switch Install! Z-Automotive Auxiliary Kit
ฝัง
- เผยแพร่เมื่อ 2 ต.ค. 2024
- AuxZiliary Kit Switch System - www.zautomotiv...
Z Automotive Tazer JL - www.zautomotiv...
Trim Removal Tool - amzn.to/3CpHwBR
How to add OEM factory auxiliary switches to your Jeep Wrangler or Gladiator using the Z-Automotive AuxZiliary switch kit! - ยานยนต์และพาหนะ
AuxZiliary Kit Switch System - bit.ly/46KhUgM
Tazer JL - www.zautomotive.com/product/z_tzr_jlm?ref=casey250
Still can't believe you got a Mojave !!! Obviously doing the engine swap was awesome !!!
Just curious but, why didn't you get a sport considering all the changes you've made to this truck? It seems it would have been more cost effective in the long run.
I did a cost break down on this 2 years ago. The delta is less then you think when you consider what I can sell my axles, tcase for and then I get the strengthened frame, the Mojave hood and nicer interior and seats.
Do you need the taser to use the auxiliary switches or is the taser just to be able to access the auxiliary switch through the radio display?
Hey, what do I do to add a switch and those lockers you have? Can you do that with the jeep Sahara?
What would be interesting is if they made Aux 1-8 switches(Four left and right) for non-rubicon models
I also have a Mojave and I’ve been looking for videos on how to do the front locker and sway bar disconnect and using the Rubicon OEM switches. You should make one video of this mod or reply with the link to it. That will be very helpful. Great video btw.
Hey, what do I do to add a switch and those lockers you have? Can you do that with the jeep Sahara?
And how do you talk to the guys from Z automotive? I really would like to talk to him.
Thanks for posting this. Have been waiting for it to be released. Doesn't look like too bad of an install. Tazer is pretty amazing. Not cheap but the quality is great.
Thank you! Hope you like the new kit
darn, I wish that had been out when I added my Lasfit switches...
Been some time, but each relay/fuse bank from left to right in amp is 40, 10, 20, 30? So you can basically run just about any light? And guessing each color is for each aux bank?
Added the OEM aux switches to my 2018 Rubicon and honestly wasn’t that bad. Only annoyance was that the taser I had couldn’t enable them so I had to take the Jeep to the dealership.
Nice to know info!!
Poor explanations and includes things not needed in every install. No thanks.
You need to remove the negative cable, and then take the two negative cables that are both together apart or else you will still have power to the vehicle from the secondary battery
I would add some weatherstripping under that plate to keep metal from metal contact
What radio and service type do you use for communications? I believe I saw a yaesu radio in an old video of yours. I also think I saw from a video on Chance Barbers channel that Canada’s version of “CB” is within the uhf band, if you run that or happen to know, I’m curious what wattage is allowed.
I think it’s called LAN1, LAN2, LAN3, ect.
Overall curious what the options are compared to the U.S.’s GMRS and CB radios.
I use a yaesu 400xdr
So glad you installed this. I have been waiting for this to release.
Where did you buy the actual aux switch? They are not available through zoom Automotive.
You can order them at the dealership.
How the puke that V8 sit inside there..
remove body, insert engine, install body.
@@Casey250 so tight.
Casey, I have a EcoDiesel Wrangler JL with a 7 inch screen. Will the switches and taser work with Jeeps with the 7 inch screen?
This kit is not currently compatible with the EcoDiesel
Caution to buyers. This product does not support the backlight illumination of the factory switch. From support:
They do not have the illumination option with the ambient lighting of the vehicle and only illuminate when a button is activated.
Who cares???
@@dec1slh I do. It's about useless at night.
@@ladder09 ah, makes sense
Thanks for the video. What is the max amps per switch? I didn't see it listed on zautomotive's website.
I'll ask them to leave an answer here
Solid-state control box?..... as opposed a a control box powered by vacuum tubes?
As opposed to one that uses relays 👊
That’s bad ass. Good presentation! I’ll have to look into this. 👍🏻👍🏻👍🏻
Thanks! Thought some of you guys might find it interesting so wanted to make a video.
Here's some functionality uses of the kit: th-cam.com/video/pJMXw6wvHbA/w-d-xo.html
Always a excellent presentation
Finally a good use for the stock antenna!! Great video.
Ya! Lol don't throw it away
Now I just have to find my stock antenna
You can find lots of them in parking lots if you are sneaky:)
This just got complicated
Why do you still have the warning tab hanging off the glove box ?
This was shot just after I bought the truck.
@@Casey250 oh got it. Great video dude. 🤙🏻
Much appreciated 👍👍
Great Video Casey, you got me thinking
When ever I get thinking I end up spending money lol
Here's some usage cases for the kit: th-cam.com/video/pJMXw6wvHbA/w-d-xo.html
@@Casey250 same here lol