Wright Intensity 36in VS. John Deere 636M 36in - Stand-On Mower Review
ฝัง
- เผยแพร่เมื่อ 16 ต.ค. 2024
- Wright Intensity 36in VS. John Deere 636M 36in - Stand-On Mower Review
Watch my last video to learn about the SureCan 50 Subscriber giveaway, and Echo SRM-225 Giveaway at 100 Subscribers!
Just be subscribed, like and comment on that video, and you'll be entered too win. Entries will end on June 30th.
Instagram - / tjlawnservice
Twitter - / tj_lawnservice
Facebook - / tjlawnservice
![ILLSLICK - WINTER IS COMING [Official Video]](http://i.ytimg.com/vi/dwTMeM1zIhQ/mqdefault.jpg)
So I bought my first 60” Great Dane many years ago.
I also used to work for a National lawn maintenance company and we handled large commercial properties and many of em had long steep slopes .
Now , inside the office of our shop was the OSHA literature with a diagram of how not to mow slopes across .
The proper and safer way is to come up & an angle and begin to backup and start your turn at the same time .
It’s done at angles and never straight up or down .
The sit down JD has a built in safety feature that is very important.
As long as ya start at the top of a steep slope and don’t touch your brakes the mower will not slip or go fast , kinda like an engine brake .
Ya slowly engage the brakes as your near the end of the bottom run .
I personally also like the JD 36” stand on mower .
It cuts like a champ and handles the toughest task .
Wright's front wheels are staggered for balance stability. Wright is the father of stand ons. No one has been doing it longer. Wright has pretty much perfected it. Everyone else is just catching up.
The Wright is staggered to reduce scalping. The deere wheels are pushed out because Deere wanted it to be more front heavy.
@@Ed.Wright thank you for the clarity sir. ✊🏿
But they the same mower
If 1st means best then that Kawasaki engine should be a Briggs and Stratton.
I own a 60” Great Dane stand on mower where the deck height adjustment is washers that ya have to remove the wheels to do that but it was fairly easy to do.
Stand on mowers are great since they are able to be very nimble , less deck space on a trailer and for the backyards with a 34”36” deck can run circles over a 36” walk-behind .
The company that I used to work with would send the crews out with just 1 sit down John Deere mower even though they had 36” & 52” stand on mowers . I was finally able to get the 36” & 52 “ for our crew as we serviced very large and small commercial properties that had a lot of small islands and large fields & ditches and slopes.
The Wright Standing Mower would be my choice.
Personally I like the Quad-Levers on the Wright over the Deere.
Why? Because it gives your hands a 'Break'. Meaning you can change your Grip to relax your hands over the course of the day.
Also I like their Rubber Chute over the Deere's Plastic one. Wright has said they designed that chute to be able to 'Stick It' up like that to keep it out of the way.
Plus I believe the Wright Mowers are better engineered over all then most if not all other mowers out there.
John Deere in my opinion (and many others as well) ride on their reputation to much now a days...
The John deer is the previous model of wright not sure if you are aware of that.
Both mowers are almost the same I've been with Deere for 30 plus years the difference is John Deere finance once you establish credit with Deere your good forever what ever you want you can grow your business wright and the other companies can't compete with John Deere financial go with Deere I've tried all the other 36 standers wright and Deere are the best good luck 👍
Didnt know that. Really great to know. Bought my 930m years ago with JD Financial. Just bought a 636m a couple of days ago with no issues with credit. Going to see how much I like this stander and might upgrade my Z for a new one.
I’m still starting my company with all Wright. Gotta save more money since I switched my decision from gravely to wright. It is what it is I’m going with all wright mowers
Nothing like starting that mower at Full throttle there. I always get my guys a hard time that sometimes they forget its a personal thing but how do you like the build quality on the deer? The Wrights we have had easily crossed the Thousand hour threshold with literally zero issues. Also what engines are on those machines?
Great review, thanks for sharing. I was on the fence between exmark and John Deere. I’m going to go with the Deere! 👍
I've demoed the Wright which are the same as the John Deere and didn't like it. Cut quality in early morning dew covered grass sucked it would constantly clump up and the platform was so uncomfortable. I'll stick with my Ferris mowers. They cut great in both wet or dry grass and their suspension system really makes mowing all day long so comfortable. You're definitely comparing apples to apples though with those 2 mowers being the same with minor changes.
Thank you for this video. Im in the market for a 36in stander and I've been going back and forth between a few brands. And I haven't seen true comparision between a new deer and a new Wright.
Yea me neither . I haven't seen a video with both of these. I personally like them both after looking at this video. Here in south Texas both are popular brands.
Have you decided on a 36in yet? I'm in the same boat. Trying to decide.
I don’t know about the transmission on the new Wright 36”, but I have a 32” and it’s super slow. Cut quality it’s good, but I also get a good cut quality on my Scag V Ride II, but Scag is a lot faster. I get a very good cut quality even at full speed. Also, suspension on Scag is amazing!
@@TundraAbril something's got to be wrong with the stander we used to have that seems gag and I would literally Blow by the Scag on the Stander going down the street
Check out the Bradley 36”. It’s a beast, 25 hp, 7 gauge deck, 3100 hydros. $4000 👍
Dealer support is a must when deciding which to purchase. How much air in those tires? 10-12 psi should be sufficient on either of them
John Deere looks good almost the same as Wright stander but I like more Wright stand on mowers.
Great video and great music! BG lives about 20 mins from me!
I’m in the market too for a 36” stand on. Right now Exmark Staris 36” is $7600 out the door at my local dealer. A bobcat mower dealer in Connecticut has a 36” bobcat stand on for $6500 delivered to my door. I got my snapper pro walk behind from them in October and they no longer sell that brand.Thanks for the demo what did you decide ?
Grassology4610 For my business at this point, I actually decided on a cub cadet walk behind. However, as said in the video these mowers are almost the exact same machine. I did like the john deere’s steering more though.
Ferris is who took over "Snapper". The Ferris line of mowers usually runs cheaper in price, too. No, i haven't operated the ferris but there are plenty of vids on them. Best of luck to you and the rest of lawn care professionals.
@@tbytchannel1 ..hows your cub cadet..??i got same thing j saw you vid and watch it before i bought mine...now i love it..but this is my future purchase
Reygen Abraham Cub cadet is good. Just had a problem yesterday that the line going to the drive control snapped, but it cuts great and is a sweet deal for the price
@@tbytchannel1 ..check out my little clip in youtube how i put hitch lock pin in my handle works great and reduce the fatique in your hands
Nothing runs like a deere 😉
John Deere likely has less horsepower? Notice that it doesn't have the commercial air filter canister? The Deere rep was pretty evasive when he said they were the same manufacturer, but he didn't say they were the same motor.
How much do John Deere stand on mower cost 36
Cant decide wether 36 inch deere or 36 scag
John Deere is copying designs? What happened to them?
Also is it just me or have the rabbits been breeding all year long? Usually they're done by like June and I literally found a nest of babies in early October at least that's how it is in the Northeast
The Deere's controls seem more comfortable and efficient, also I don't judge cut quality on mowers because if I was going to buy one the first thing I would do is replace and upgrade the blades.
Any price difference,?
Really all just based one when and where you get it. Both typically run mid range of 8kish.
Sales run around this time of year, so take a look!
John Deere, is the best in lawnmowers.
Too bad,the side discharge chute can't be closed
but everyone knows the grandstand is the superior machine lol. plus you can fold the platform up and have a walk behind when you need it
which is why i’ve bought multiple grandstands since this video!
sweet i like the john deere better
Wished this video had captions so I can read what you’re saying. Yes I’m hard of hearing
So what your saying is that you don’t like either of them lol because at the beginning you said you didn’t like the wright 😂
Looked like they are both awesome mowers and both were sliding some on the hill.
Swimbait1 they definetly were.
weird thing is... my residential john deere 48 doesn’t slide nearly as much as both this standers did
Width is key... 36 wont do hills near as well as a 48..
That was a solid comparison and review - thank you.
What are U smoking Tom? Completely worthless review..."like I said"!!! 🤣
Wright built the for JD.
Correct
John Deere is better
Great video. John Deere is not made by Wright
I find that hard to believe
I wish JD made a 42 inch mower.
A 42 stander or just 42 in general? Because they make 42s
Nice review without an opinion
now do the ferris
This is ridiculous. They are the SAME mower!
The only difference is the color, and the control levers.
tandemrotor1 exactly what i thought
But wright came up with the design
ethan3w this is true. and again, it’s all matter of opinion. If the wright had the deere’s steering, I would have bought it.
If the deere had the weights rubber shute, I would have bought that as well.
I decided elsewhere on both mowers.
Its not modeled after. it is designed by wright. that is also a wright deck
Wright no longer works with JD.
Really, so is jd not offering stand on then?