I hope it was good and informative! It is my first hammer drill review and there are things I would like to do differently next time but I hope I managed to show you what you may want to know.
Hello! Not had them at the same time, but having used them for pretty much driving the same types of screws I feel this one just has the edge over the C3 drill driver.
Би било интересно да направите сравнение на този инструмент с по-мощния - PPSBSA 20-Li A1. Изглеждат еднакви, но само мощноста ли е разликата между двата ?
Гледам ги в сайта на Lidl. Бих казал мощност, размер и цена. Все още не съм имал PPSBSA 20-Li A1 в ръцете си. Надявам се да спестя малко и това да се случи!
I have PABSP 20Li C2 60NM, this one is nice but I think I wouldn't be happy with it's size... I'm thinking about swapping C2 for C3, it's even smaller, can't decide because I don't know is it as good as previous model.
if you buy the set with charger and 2 batteries and bits, the drill handle has 60NM written on it, but the box cover and manual say 64NM. Maybe its just my model, or maybe they re-use handles from older models...
Very interesting! I don't remember what the writing was on the handle on this one and I have already returned it to the owner. I'll see if I can get them to check! I am looking through the videos to see if I can spot the writing on the handle but no luck. I would not be surprised at all if they reuse old parts.
@@BrokeLifeEU the one in the video has 64nm written on the handle. As do other videos of it without battery. Havent found an unboxing of the set with batteries and charger.
Great video. What is the weight without the battery and total length please? I have the previous version without the hammer drill. New one is bit larger and prolly heavier. Just curious for the exact numbers. Did you know that the B2 has a temperature sensor built in that shuts down at 0°C and below, to protect the battery. They removed this in version C2.
I did not weigh it, because for the functionality it has it felt light enough. Weights will be from the lidl website: Drill: approx. 1.45 kg Additional handle: approx. 205 g Smart 4ah battery: 601 g
super, definitivno kupujem.. samo bih ti prigovorio da je bušenje u željezo bila prezentacija loših (tupih) borera :D nego koje kvacilo na bušilici? Rohm?
Ja sam kriv. Odlučio sam da koristim svoje korišćene delove iz Milvokija, a ne svoj novi Iato. Osećao sam da bi Milvoki bio bolji, ali trebalo je da koristim nove!
Hvala za video. Nisam uspeo da pronadjem nigde recenziju ovog modela. do sada. A uskoro se pojavljuje u prodaji i dvoumio sam se da li da uzmem busilicu/srafalici bez cekica isto C3 (o kojoj sam pogledao dosta recenzija i “ok” se pokazala za taj novac), ili da uzmem ovaj model...
Imam C3 bez čekića. To je odlična vježba. Godinu dana je bilo odlično. Ova ima više funkcija i ako bih trebao imati samo jednu bušilicu to bi bila C3 sa modom čekića.
why do you drown the drill bit? just extract it every now and then to free the hole from chips and you'll see what a big difference! sorry for the translation
No worries! As long as we understand each other it is not a problem at all! So I did that just so I can make it more difficult for the drill! To see if it would stop.
Muchas gracias por la demostración, para uso no profesional en casa, creo que sus posibilidades son muy buenas. Si usted tiene la versión Parkside Performance de 80Nm, sería muy buena idea una comparación junto a este nuevo taladro Parkside Performance de 64Nm. Saludos desde España.
@user-yy8mc1mi9f Oh you mesn with the clutch, it is very sensitive and can‘t really be used to screw in hard wood. You can use it for smaller screws or in softer wood.
It is coming from the chuck. Because I did not tighten it and the jaws were a bit loose. So when the motor stops there is still some movement in the chick jaws and I think that causes that noise. Otherwise I spent 2-3 hours with it yesterday doing those sorts of difficult jobs and it was fine! I had 4 attempts with the big drill at that very hard piece of wood and it never cut out nor did it have any issue attempting to drill through it.
Sì, pensavo che 64 Nm non sarebbero stati sufficienti per un trapano a percussione, ma sono rimasto piacevolmente sorpreso. È molto potente e non è né troppo pesante né troppo grande. Un buon strumento!
Yes, not a bad one at all. If I had to have only one drill at home this would be it! It is not too heavy and is just powerful enough to get any DIY type of job done.
Nice, but next time please put the drill on the table when checking chuck wobble. :) It's impossible to assess chuck accuracy when your hand is wobbling the drill.
Yes, this is the option a person goes for if they want one drill for all their drilling needs. Otherwise I would get a normal drill driver and an SDS hammer drill as you say.
I think your 10mm drill bit is dull, it's not like the drill wasn't spinning it.... try a new drill bit, go slow, add oil or water, and you'll see long curls not small chips
In highnsights I admit you are correct! I used Milwaukee impact rated titanium HSS drill bits. They were used but not that much so I was expecting this not be a problem. I used oil on the metal you can see the bottle at the start of the video and you can see the oil on the metal. I left this bit in indeed to show that no matter what the drill never stopped and it kept on trying despite the dill drill bit! It is a good drill this one! For 50EUR I could even call it a great deal!
Unfortunately not everyone has the disposable income to go out and get a DeWalt or Makita. For some people it is just about basic DIY and I feel Parkside tools do a good job at that.
@@BrokeLifeEU well, I bought 6 or 7 parkshit x20v toys, and now I know I can't afford to spend money on parkshit toys. Not a single one lasted the warranty period. And you know what happens after the warranty expires? You have a paper weight. Yes, I do own a DeWalt hammer drill. Bought it in 2008 and after thousands of holes in concrete it still works as the first day. The parkshit I bought, almost burned it the first time I used it. Tell you again, I can't afford to buy parkshit.
C3 ? X una versione nuova? Dovrebbero dargli la sigla A1 Un trapano avvitatore a percussione da 64 nm molto simile al 150 nm a percussione anzi sembrano uguali Il costo del 150 nm è di 120 euro solo macchina Qui parliamo di 50 euro Quindi è un nuovo modello Ma xké la sigla C3?
Per quel prezzo è ottimo direi. Penso che sia il C3, perché il numero del modello è PSBSAP e l'ultimo modello con B era un B3 e aveva 80 Nm ma era più lungo di questo e c'erano alcune differenze visive.
@@BrokeLifeEU se ho capito bene costa 50 euro ...quindi parliamo di un 60 nm più forte di 4 nm e più giri motore oltre alla percussione. 50 euro dopodomani vendono il C3 solo macchina e senza percussione È questo che mi lascia un po' dubitoso Comunque si a quel prezzo se in Italia verrà confermato è un ottimo attrezzo
Spero che sia a quel prezzo! 64Nm non sembrano tanti ma non ho trovato il limite dell'attrezzo! È stato potente! Come sai Lidl non vende sempre allo stesso prezzo in paesi diversi. Ad esempio, il nuovo impatto 12V PPDSSA A1 era di 40 euro in Belgio (ora 50) e 75 euro in Germania. Stesso strumento e una grande differenza.
In Italia uscirà settimana prossima, ma costerà 120 euro. Uscirà con valigetta in metallo/plastica, 2 batterie da 2a e 98 accessori tra cui punte e bit @@BrokeLifeEU
Preferirei solo lo strumento. Le batterie da 2 Ah non durano molto. Lo SMART 4Ah ha le stesse dimensioni. E i pezzi non sono così buoni. Utilizzo gli strumenti Parkside e le punte Makita o Milwaukee in questo modo ottengo il massimo dagli strumenti.@@giuseppepappada4522
![PARKSIDE PERFORMANCE PSSPA 20-LI C3 [ Cordless Jigsaw 20v ]](http://i.ytimg.com/vi/hWsrho7ktkY/mqdefault.jpg)
A new lidl store opening in my country had a promo on these for 36€.Can't beat that price!
€36 for this is fantastic! I am sure you will be well pleased with it!
Appreciate the review, thanks !
I hope it was good and informative! It is my first hammer drill review and there are things I would like to do differently next time but I hope I managed to show you what you may want to know.
Super review! Thx a lot
Thank you so much! There are thinngs I would do differently now but we live and we learn!
I know my Milwaukee M18 Fuel Hammer drill can do all these things but I still want this one!
Bery difficult to say not to a cheap-ish good drill! I should know, I have 4…
@@BrokeLifeEU I think I'm tied with you, LOL I have three or four drills also
@louisd95714 We may just be on the verge of needing a psychiatrist 😂
@@BrokeLifeEUAgreed, there is probably a condition for this. 😀
Klasse Video, vielen Dank
Danke schön!
hello my friend. Just a question. Have you compared this one with the smaller of 60 nm? the pabsp 20li c3? Which one is stronger?
Hello! Not had them at the same time, but having used them for pretty much driving the same types of screws I feel this one just has the edge over the C3 drill driver.
Good tests🙂🤝
Thank you so so SO MUCH❗️I love your channel and your videos❗️You are so good🔝💯 This comment from you really makes me think I did something right ❗️
@@BrokeLifeEU Thank you for supporting me. Keep making such good videos my Friend😊🤝🤝🤝
@ErCanEverything You keep up the fantastic work too! You have so many absolutely amazing clips!
I got alot of Parkside Performance, today i got this for 36€, Performance never disappointed me. Excelent quality!
Green tools from Parkside are pretty much hit and miss, however the Perfromance line is mostly really good for the price.
Би било интересно да направите сравнение на този инструмент с по-мощния - PPSBSA 20-Li A1. Изглеждат еднакви, но само мощноста ли е разликата между двата ?
Гледам ги в сайта на Lidl. Бих казал мощност, размер и цена. Все още не съм имал PPSBSA 20-Li A1 в ръцете си. Надявам се да спестя малко и това да се случи!
I have PABSP 20Li C2 60NM, this one is nice but I think I wouldn't be happy with it's size... I'm thinking about swapping C2 for C3, it's even smaller, can't decide because I don't know is it as good as previous model.
I have the PABSP C3 never had a problem with it. It is very light but powerful. I love it!
if you buy the set with charger and 2 batteries and bits, the drill handle has 60NM written on it, but the box cover and manual say 64NM. Maybe its just my model, or maybe they re-use handles from older models...
Very interesting! I don't remember what the writing was on the handle on this one and I have already returned it to the owner. I'll see if I can get them to check! I am looking through the videos to see if I can spot the writing on the handle but no luck. I would not be surprised at all if they reuse old parts.
@@BrokeLifeEU the one in the video has 64nm written on the handle. As do other videos of it without battery. Havent found an unboxing of the set with batteries and charger.
@@BrokeLifeEU i found a video of the complete set, the handle there also says 64nm :D i will email grizzly tools and ask whats going on
Put it up on ebay and add some sort of outlandish story in the description. Then hope for the best! 😂
@@dakata17819132 Mine also has 60Nm on the handle but 64Nm on the box...
Great video. What is the weight without the battery and total length please? I have the previous version without the hammer drill. New one is bit larger and prolly heavier. Just curious for the exact numbers.
Did you know that the B2 has a temperature sensor built in that shuts down at 0°C and below, to protect the battery. They removed this in version C2.
I did not weigh it, because for the functionality it has it felt light enough. Weights will be from the lidl website:
Drill: approx. 1.45 kg
Additional handle: approx. 205 g
Smart 4ah battery: 601 g
super, definitivno kupujem.. samo bih ti prigovorio da je bušenje u željezo bila prezentacija loših (tupih) borera :D nego koje kvacilo na bušilici? Rohm?
Ja sam kriv. Odlučio sam da koristim svoje korišćene delove iz Milvokija, a ne svoj novi Iato. Osećao sam da bi Milvoki bio bolji, ali trebalo je da koristim nove!
Hvala za video. Nisam uspeo da pronadjem nigde recenziju ovog modela. do sada. A uskoro se pojavljuje u prodaji i dvoumio sam se da li da uzmem busilicu/srafalici bez cekica isto C3 (o kojoj sam pogledao dosta recenzija i “ok” se pokazala za taj novac), ili da uzmem ovaj model...
Imam C3 bez čekića. To je odlična vježba. Godinu dana je bilo odlično. Ova ima više funkcija i ako bih trebao imati samo jednu bušilicu to bi bila C3 sa modom čekića.
Please compare it with the 12V
I have already returned the drill from this video to its owner but I will see if I can arrange something! 😉
why do you drown the drill bit? just extract it every now and then to free the hole from chips and you'll see what a big difference! sorry for the translation
No worries! As long as we understand each other it is not a problem at all! So I did that just so I can make it more difficult for the drill! To see if it would stop.
Muchas gracias por la demostración, para uso no profesional en casa, creo que sus posibilidades son muy buenas.
Si usted tiene la versión Parkside Performance de 80Nm, sería muy buena idea una comparación junto a este nuevo taladro Parkside Performance de 64Nm.
Saludos desde España.
¡Hola! ¡Hola a España! ¡Para uso doméstico son fantásticos por el precio! Veré si puedo conseguir los 80 Nm para comparar.
@@BrokeLifeEU Ok muchas gracias.
Saludos desde Spain.
Did u test the screw mode?
Yes, you can find that at about 04:14
U screw them in drill mode?
@user-yy8mc1mi9f Oh you mesn with the clutch, it is very sensitive and can‘t really be used to screw in hard wood. You can use it for smaller screws or in softer wood.
Yours makes strange grinding sound when you let go off the trigger and engine stops? I think I can hear it here 1:44
It is coming from the chuck. Because I did not tighten it and the jaws were a bit loose. So when the motor stops there is still some movement in the chick jaws and I think that causes that noise. Otherwise I spent 2-3 hours with it yesterday doing those sorts of difficult jobs and it was fine! I had 4 attempts with the big drill at that very hard piece of wood and it never cut out nor did it have any issue attempting to drill through it.
Bella recensione,ho comprato anch'io quel modello e mi sembra fatto molto bene!
Sì, pensavo che 64 Nm non sarebbero stati sufficienti per un trapano a percussione, ma sono rimasto piacevolmente sorpreso. È molto potente e non è né troppo pesante né troppo grande. Un buon strumento!
Good Tool I think the Predecessor was without hammer drill, but have to say nice facelift
Yes, not a bad one at all. If I had to have only one drill at home this would be it! It is not too heavy and is just powerful enough to get any DIY type of job done.
Ciao, il mandrino é sempre un Rohm?
Sui modelli da 20 V, per quanto ho visto. SÌ.
Try PPSBSA 20-Li A1. That's power!
For sure I will! Trying to get my hands on one for some time now!
Ciao. Il vecchio modello aveva 80Nm, come mai hanno ridotto a 64Nm?
Ciao! Sono riusciti a renderlo più piccolo degli 80 Nm. E direi che sembra ancora abbastanza potente!
@@BrokeLifeEU in effetti ha meno Nm, ma ha più giri al minuto sia alla prima che alla seconda velocità
E il fattore di forma è migliore. Mi piace un sacco quello nuovo!
Nice, but next time please put the drill on the table when checking chuck wobble. :) It's impossible to assess chuck accuracy when your hand is wobbling the drill.
Thank you! I will make sure to do as you said next time!
DO YOU GET A PRIZE FOR GUESSING THE PRICE.
Is the satisfaction of knowing you were right not a sufficient motivation to hazard a guess? 😄
why do you drown the tip? just extract it every now and then to free the hole from chips and you'll see what a big difference!
Hello and than you for your comment. I did that just so it will be more difficult for the drill. A sort of a stress test let's say.
@@BrokeLifeEU 👍
this is a schlagbohr, PABH 20-Li D4, is a real hammer 1joule
Yes, this is the option a person goes for if they want one drill for all their drilling needs. Otherwise I would get a normal drill driver and an SDS hammer drill as you say.
Uvijek dobra večer kada se objavi video
Još je ljepša noć kad netko kaže nešto tako lijepo! Hvala vam!
Beast
I can't wait to try out the 150Nm version!
Отличный продукт. Только не обновляйте через фирменное приложение.
Да, приложение - не очень хорошая идея.
I think your 10mm drill bit is dull, it's not like the drill wasn't spinning it.... try a new drill bit, go slow, add oil or water, and you'll see long curls not small chips
In highnsights I admit you are correct! I used Milwaukee impact rated titanium HSS drill bits. They were used but not that much so I was expecting this not be a problem. I used oil on the metal you can see the bottle at the start of the video and you can see the oil on the metal. I left this bit in indeed to show that no matter what the drill never stopped and it kept on trying despite the dill drill bit! It is a good drill this one! For 50EUR I could even call it a great deal!
poor tree
It asked to be a part of the video.
Another parkshit toy that many will waste money on and will regret.
Unfortunately not everyone has the disposable income to go out and get a DeWalt or Makita. For some people it is just about basic DIY and I feel Parkside tools do a good job at that.
@@BrokeLifeEU well, I bought 6 or 7 parkshit x20v toys, and now I know I can't afford to spend money on parkshit toys. Not a single one lasted the warranty period. And you know what happens after the warranty expires? You have a paper weight.
Yes, I do own a DeWalt hammer drill. Bought it in 2008 and after thousands of holes in concrete it still works as the first day. The parkshit I bought, almost burned it the first time I used it.
Tell you again, I can't afford to buy parkshit.
@zefautino I am sorry you had such a bad experience! I understand your frustration!
You're so proud of the parkshit word.
C3 ? X una versione nuova?
Dovrebbero dargli la sigla A1
Un trapano avvitatore a percussione da 64 nm molto simile al 150 nm a percussione anzi sembrano uguali
Il costo del 150 nm è di 120 euro solo macchina
Qui parliamo di 50 euro
Quindi è un nuovo modello
Ma xké la sigla C3?
Per quel prezzo è ottimo direi. Penso che sia il C3, perché il numero del modello è PSBSAP e l'ultimo modello con B era un B3 e aveva 80 Nm ma era più lungo di questo e c'erano alcune differenze visive.
@@BrokeLifeEU se ho capito bene costa 50 euro ...quindi parliamo di un 60 nm più forte di 4 nm e più giri motore oltre alla percussione.
50 euro dopodomani vendono il C3 solo macchina e senza percussione
È questo che mi lascia un po' dubitoso
Comunque si a quel prezzo se in Italia verrà confermato è un ottimo attrezzo
Spero che sia a quel prezzo! 64Nm non sembrano tanti ma non ho trovato il limite dell'attrezzo! È stato potente! Come sai Lidl non vende sempre allo stesso prezzo in paesi diversi. Ad esempio, il nuovo impatto 12V PPDSSA A1 era di 40 euro in Belgio (ora 50) e 75 euro in Germania. Stesso strumento e una grande differenza.
In Italia uscirà settimana prossima, ma costerà 120 euro. Uscirà con valigetta in metallo/plastica, 2 batterie da 2a e 98 accessori tra cui punte e bit @@BrokeLifeEU
Preferirei solo lo strumento. Le batterie da 2 Ah non durano molto. Lo SMART 4Ah ha le stesse dimensioni. E i pezzi non sono così buoni. Utilizzo gli strumenti Parkside e le punte Makita o Milwaukee in questo modo ottengo il massimo dagli strumenti.@@giuseppepappada4522