Just tried these settings with the CSL DD 8nm... not good lol. The wheel feels extremely loose and shakes violently when going over curbs. Every wheel is different, so it's going to be difficult to find the right settings for everyone.
My settings to try Strength: 5Nm or higher Angle: 900 adjust per car basis Vibration On Steering: Simulation Traction Control: On or preference ABS: On or preference Stability Control: On or preference Deadzones: All Default Vibration Scale: 100 Force Feedback Scale: 100 Steering Self Alignment: 180 Mechanical Trail Scale: 200 Pneumatic Trail Scale: 90 Road Feel Scale: 200 Load Sensitivity: 50 Wheel Damper Scale: 200 Center Spring Scale: 100 Dynamic Damper Behavior: 0 Steering Sensitivity: 25 Steering Linearity: 0
The moment you said u were using a Moza R9 my heart skipped 2 beats out of pure happiness because I happen to own the exact same wheel!!! I'll start playing on normal release, upcoming Tuesday and watched so many streams/video's where the driving on a wheel looked absolutely HOREENDOUS and the people playing had no idea whatsoever that it was off but I could tell just by looking at it. You have no idea how exited I am to try these settings on day one upcoming Tuesday!!!!!
Same!.. R9 w/12"ES. this is really good news! I went back n forth with this all night last night/mrng, and this afternoon I view this post. I get the "jutter' now in the M4 '21. pithouse is maxed out. but what about 'wheel friction', I figure on using it.. also, Q: where is the MX5? Wow! I put ntrl-inrt and whl-frctn to half and no more deadzne. yay! Double Wow! now ntrl-inrt is max. whl-frctn adds weight/dampen (10%) soo far. Ok! '16 MX-5 for 45k lol.
I had to tell FM my Gpro was a G923 but with a bit of fiddling with the settings the Trueforce feels great .it's different from gt7 but just as good in it's own way .Cheers for making me aware of how good the game is ,i'm really enjoying my racing again.
Vibration Scale 60 Force Feedback Scale 100 Steering Self Alignment 100 Mechanical Trail Scale 85 Pneumatic Trail Scale 130 Road Feel Scale 140 Load Sensitivity 90 Wheel Damping Scale 15 Center Spring Scale 10 Dynamic Damper Behavior 85 Steering Sensitivity 50 Steering Linearity 50 This is a good base to start with belt or gear driven wheels. Everything else default but deadzones set to O and 100. Set it to simulation steering in the other option screen on game
Would you be able to share your Pit House settings for your Moza wheel? I've been playing around with the FFB and I can't get it to feel quite right. I'm going to try out your in-game settings and see how it feels.
Dude, you should check your Miata's steering wheel hydraulics. 200 strength is too much, even for my Fanatec Clubsport 2'5 base. In my case, "zero" for steering self-alignment makes the car feel like the steering wheel was turned off. I increased it to 40 and lowered the center spring scale to "zero". And, for the road feel scale, I set it to 20 (this way I can feel curbs, etc). Now it does feel great. Thx!
I had the same thing happen with my dd2. Both mclaren wheel and formula v2 felt like there was no force feedback. The steering was so floaty with no stiffness at all. I thought it was broken or needed an update until I started messing about with the one setting he insisted shouldn't be a thing...the steering self allighnment. The other settings worked OK for me. Just that one that nearly broke the game for me. I had almost written it off and going back to starfield and gt7.
Even if you don't run the R9/ES combo, this is the first videeo to watch after owning and installing this title. Now i'm off-and-runin'. Thank You Kireth, you alone restored my faith in FM8 1.488.4138.0. T10 owes you a debt of graditute for shedding lite on this ffb mystery. looking forward to hearing more. ty
The vibration setting is a canned effect and is not meant for dd wheels. Center sprig should also be off or very low as it forces the wheel to center, also canned
Central spring scale should be 0 or super low, unless you play on wheel whithout normal ffb. Just sit in real car and turn the wheel, it won't move to the center by itself when the car dorsn't move.
Hmm i just cant get my settings right for a g920. As soon as i touch the break even slightly, without turning the wheel at all the car starts spinning off the track :/ This definitely isn't realistic, I drove an Evora in real life the other week and gave it a real go, for some reason its like the the road surface is like ice on FM when using a wheel, actually so much easier using a controller... AND in real life :D Any idea's?
Anybody have anything for the Logitech g920? I feel like forza just doesn’t put out enough. Barely feel curbs and stuff I can out my FFB to max and it’s still so light
Check the in game telemetry and make sure you are not clipping. High settings can lead to the wheel torque maxing out, meaning you will feel nothing else at all when it does this.
@@Jonusbiker No problem. Glad it helped you. A G920 is a pretty low torque wheel, so you not likely to be able to get a strong FFB without clipping a lot.
See if this works Angle: 900 adjust per car LMP 360 Vibration On Traction Control: On or preference ABS: On or preference Stability Control: On or preference Deadzones: All Default Vibration Scale: 100 Force Feedback Scale: 100 Self Center Alignment: 180 Mechanical Trail Scale: 200 Pneumatic Trail Scale: 90 Road Feel Scale: 200 Load Sensitivity: 50 Wheel Damper Scale: 200 Center Spring Scale: 100 Dynamic Damper Behavior: 0 Steering Sensitivity: 25 Steering Linearity: 0
Hello , i have a thrustmaster t150.. I just bought forza for the first time (forza motorsport) It worked very well at the beginning , it was pretty close to perfect.. but after few career races i would try online , but my wheels in game where going left right left right etc… I delete the game and instal again but now my steering wheel is not detactable anymore .. Ive tried some things from youtube but it didnt work.. Somebody had also this problems ?? Thxxx
@@Kireth so far so good these have been the best settings I’ve tried yet. I did have to turn wheel sensitivity up to 80 it just felt right for my set up personally.
@@FMwin900you have the 5nm or 8nm boost pack? I found some settings on the fanatec forum that work pretty damn good as well I'm gonna try these ones when I get home though
I haven’t played a racing game since Forza 4… I finally bought my self a really good setup for racing, found out this was coming out, played lastnight and damn this game is bomb! So much effing fun! Love the spec style of online racing so far. Very equal. I played respectfully… some others did not, that is my only gripe
This is by far the best settings i found, wow i was so close on giving up on Forza, please share your pithouse settings on your R9, i got R12 so should be close.
Do you know how to fix the traction control on the wheel? Full throttle on the controller, no wheel spin, full throttle on the wheel, lots of wheel spin.
I played forza on xbox for the past year on the logitech pro wheel and pedals i now have a pc and the wheel just runs horrible on the game anyone have setting recommendations? I also tried the wheel out on WRC and everything works as it should its just forza
I'm feeling the spring inside the wheel lose near its center. I feel it bouncing sideways while I'm holding it straight still, the spring starts going left and right like a pendulum. It is more noticable driving the fastest cars in game. It's been terrible. I have a G27
@@Kirethyoooo! These settings are legit! Only thing I changed is slightly lower vibration cause it feels a little janky on my T248. Thanks again! This has massively improved the feel of the game for me!
Vibration Scale 60 Force Feedback Scale 100 Steering Self Alignment 100 Mechanical Trail Scale 85 Pneumatic Trail Scale 130 Road Feel Scale 140 Load Sensitivity 90 Wheel Damping Scale 15 Center Spring Scale 10 Dynamic Damper Behavior 85 Steering Sensitivity 50 Steering Linearity 50 This is a good base to start with belt or gear driven wheels. Everything else default but deadzones set to O and 100.
I have to reduce wheel damping scale on my tsxw to reduce judder but he's got it all the way off already so i don't trust these settings I'm sorry. Having 200 on ffb strength is just so much extra. And most sims say to drop center spring off near 0 not increase it like here 👎
@@Kireth it’s all the way. I have a podium f1 dd1 but only qr2 I have is on my PlayStation rim, I’m gonna undo the qr and put it on my Xbox rim so I can give this a go with the dd1 and try ur settings there. On console sometimes the belt wheels work better, but I guess not in this case
Just tried these settings with the Thrustmaster T300 and unfortunately they don’t work well! The judder effect is way too pronounced and turning the Road Feel Scale to 0 gives no feel in the centre, even with Centre Spring Scale turned up to 150. IMHO the Road Feel Scale needs to be at least 130 on the T300.
Anybody else having issues with the ffb on moza r5 being extremely weak, I can steer with my fingers and have force feedback scale to 200 with outhouse maxed out
They got someone to eat a whole box of laxatives and got him to aim his shltter at a blank Y/X graph. Transcribed the speckled inputs on the graph in to computer code and voila. Force feedback settings 👌🏻
Well, that's what mechanical and pneumatic trail are for. You NEED to feel oversteer through the wheel, and you feel understeer through "leaning" on to the grip (against FFB) and feeling it "give in" - your settings instead give a fake impression by the fake rumble coming from the canned vibration setting - which I would turn off entirely. If it works for you, fine. But sorry, for me these are pretty objectively the worst settings I have tried yet. There's basically no information of what's actually going on with the care, just for some rumble effects and some needlesly heavy centering spring, which in return kills all the ACTUAL crucial information.
@@Kireth it's actually pretty hard to describe, as it's more a intuitive thing. But I'll try. With a "correctly" (in my opinion) FFB, say you maneuver a RWD car out of a right hand turn. In doing so, you obviously turn the wheel to the right. In the clockwise movement of your wheel, you should work against FFB, which in this case ideally signals you grip from the front tires, so basically you feel (the lack of) understeer from the pressure working against you turning the wheel to the right. Oversteer you can "feel" once you open up the wheel again while accelerating out of the corner. This opening up should feel somewhat "neutral" against the force you were leaning against before, when NOT over steering. Once you start to oversteer, the wheel will quickly feel light in the counter clockwise direction, if you would let it loose now it would spin ccw by itself. There's your oversteer FFB. It's probably more nuanced, and it is really hard to describe, especially since both forces I tried to outline in my example are basically both time just the motor "turning ccw", yet once it's understeer, once oversteer. But that's kind of the point in my initial criticism: our motors can only do two things: turn left or turn right, in somewhat smart ways guided by the FFB algorithm. So damping those two forces by constant, non responsive settings like fixed center spring or canned rumble effects, you take away forces that could be used to deliver sensitive, adaptive informations like I tried to explain here.
I am planning to get a PC and the only thing stopping me from selling my PS5 by that point is a GT7 alternative (I don't play it anymore because of the recklessness). This video gave me a lot of hope!
In some wheels there's also an issue ,where if feels like the FFB snaps as soon as you turn the wheel. Switch Invert FFB option from where you have it and it should solve it. Happened on my TM T-GT2, turn the wheel 5-10* and it felt like i was side swiped by a car
I can 100% see what they are trying to replicate and if you understand it as signalling you are exceeding the tyre grip you can find the limit easier 🙌🙌
So far your settings the best at least I can somewhat control the car , I keep having an issue with the car swaying left and right , I am using a TMX racing wheel .
Another issue I am having is Its stuck at aa 270 degree rotation , even if I have my setting on the actual wheel to 900 once I play Forza I am only getting 270 , and there is no option in the game to change this .
Although its a shame the Default settings aren't more playable. At the end of the day. if you can make it feel good after some tweaking thats good news. most people who own wheels are usually used to having to fiddle with settings for some reason anyway. and videos like this help. I just want to jump into it when it comes out, so ill just use your settings. because even if they aren't perfect for me i can just use yours as a more Drive-able base to set up my own.
@@1MantisPhoenix they forgot to actually release most of the game and it crashes every 2 seconds so.i dont bother playing it. Pretty big joke of a release. Less content than forza motorsport 5 had. How that is acceptable is beyond me.
Vibration Scale 60 Force Feedback Scale 100 Steering Self Alignment 100 Mechanical Trail Scale 85 Pneumatic Trail Scale 130 Road Feel Scale 140 Load Sensitivity 90 Wheel Damping Scale 15 Center Spring Scale 10 Dynamic Damper Behavior 85 Steering Sensitivity 50 Steering Linearity 50 This is a good base to start with belt or gear driven wheels. Everything else default but deadzones set to O and 100.
These don’t work at all on the XBox with the Logitech G Pro wheel. There’s basically no resistance to turning the whee. I thought everything was just switched off. The juddering through cornering is out of control high though.
Here you go G Pro Strength: 5Nm TF Audio: 50 FFB Filter: 10 Dampener: 100 Angle: 900 adjust per car LMP 360 Brk Force: 15 Vibration On Traction Control: On or preference ABS: On or preference Stability Control: On or preference Deadzones: All Default Vibration Scale: 100 Force Feedback Scale: 100 Self Center Alignment: 180 Mechanical Trail Scale: 200 Pneumatic Trail Scale: 90 Road Feel Scale: 200 Load Sensitivity: 50 Wheel Damper Scale: 200 Center Spring Scale: 100 Dynamic Damper Behavior: 0 Steering Sensitivity: 25 Steering Linearity: 0
I didnt have any issues with defualt settings on my Simagic Alpa Mini Direct Drive. The only thing I had to do was turn down the ffb to 50% and invert The ffb using fm5 Presets. So I'm guessing everyones settings will differ froM what wheel base they are using.
I am not sure what went wrong but these settings gave me almost 0 FFB on my DD1. I had to go back to another youtubers settings as that does provide the ffb. Again, not sure how, but maybe you're racing without it? lol g
You have normal steering on. It should be simulation or else you play with the input filters for controllers. These settings are to overcome that critical option you forgot to change. This isn't going to work for most people.
I think you interchanged "Self-Align" and "Center Spring". Self-align is the correcting force of the wheel coming from the tires. Making the car going straight again by itself when it is moving. Therefore, should be reasonable high. Center Spring is the aktive centering force of the wheel, independent of movement (like the auto centering of a joystick). This should be (close to) zero (like a car on a lift, wheel stays wherever you turn it).
I've been posting saying since day one of GT7 that the game needs more options to customize the FFB, even if its not so bad, it is still far behind many racing games and I think that it could be much improved, iv only we had the possibility to do it...good to see that forza gives you the chance so play with so many settings
I actually had to stop playing gt7 for a bit because the ffb was so bland and boring. Luckily they made it better a few patches ago. Why they don't have more settings for it is mind boggling. Only thing that brings me back to gt7 every few months or so is vr. I play mainly single player and the "single player" content is non existent once you get gold on all the trails and track experiences. Think the worst part for me is the ai. It's completely atrocious and I don't even feel like I'm racing. Wish they could implement sophy
In my opinion, when it comes to GT7 and wheel settings, I set them once almost 10 months ago and it's great, I don't see any reason to change anything, I don't need any more setting options.
@@vibovit9851 I can keep the same settings using GT cars, but the problem is that if you use a street car you don't get enough informations from the wheel using the same settings... It's ok to feel the difference, but in my opinion the ffb doesn't scale correctly. In addition to that I miss a lot of details that I feel with other sims, like many curbs that you are supposed to feel. So probably there is too much dampening that I would like to turn down but I can't... ironically the ffb was better in gt6 for ps3
Yeah, center spring scale does almost nothing, at least on a non DD wheel. Steering self alignment is the combination of pneumatic and mechanical trail, so at 0 there is 0 torque steer. Center spring scale is supposed to center the wheel without outside influence, but when you check telemetry it falls off a cliff when turning, and at least on my wheeel doesn't even center it letting, but just slighty moves towards the center before stopping. If you want a smoother FFB experience, use more mechanical trail over pneumatic. Pneumatic is useful for the feeling of traction loss, especially on understeer, but the drop off in alignment makes feeling the car impossible by itself. And then when you are losing tractio and regaining at the edge, pnuematic goes crazy on the FFB.
@@Kireth Hard to do. Mechanical is strictly the alignment of the car. So it provides rear end feel, as the FFB ramps and then goes steady at peak traction and over. It is also smooth with no other detail, but you could play then game effectively with mechanical alone. Pneumatic ramps the alignment until peak traction and then drops of as the tires start slipping. So once traction is lost, there is no feel, and at the edge of traction is goes down and back up as the tires lose and gain traction. This makes FFB very erratic by itself, but is good detail to supplement mechanical as the main driver of steering alignment. Hope that helps.
@@Kireth Also you need Steering alignment scale as it is a combination of mechancial and pneumatic. Without it, neither has an effect at all. You can use that to adjust the two togwether independant of other FFB settings.
Vibration Scale 60 Force Feedback Scale 100 Steering Self Alignment 100 Mechanical Trail Scale 85 Pneumatic Trail Scale 130 Road Feel Scale 140 Load Sensitivity 90 Wheel Damping Scale 15 Center Spring Scale 10 Dynamic Damper Behavior 85 Steering Sensitivity 50 Steering Linearity 50 This is a good base to start with belt or gear driven wheels. Everything else default but deadzones set to O and 100.
Ok this advice might be great for someone with the same wheel as him. However I tried these settings on a Thrustmaster TS-XW and horrifying. No feel at all. Dreadful.
Just tried your setup on my tm tx458 Italia edition and it felt pretty good, had to make the wheel feel a bit heavier for my liking, but overall decent starting point, thank you. 👊🏁
@@mikebos5072 I ended up trying a different setup from another YT video and then tweaked it a bit, currently have wheel apart as having ffb issues, upgrading the fan and ventilation, I will send you my settings a few days as been messing around with them trying to sort wheel out.
![ประสบการณ์ จ้าง Developer ที่ผมจะไม่มีวันลืม [ภาค2]](http://i.ytimg.com/vi/pZbsSDRrmXA/mqdefault.jpg)
My SIMULATION settings now available for progressive detail! 👉👉 th-cam.com/video/L5XpwEoQkiA/w-d-xo.htmlsi=uBn_lsxYUnQU7lnx
Are you still using the mazda settings?
Just tried these settings with the CSL DD 8nm... not good lol. The wheel feels extremely loose and shakes violently when going over curbs. Every wheel is different, so it's going to be difficult to find the right settings for everyone.
There's been updates th-cam.com/video/b0qccaRLTy4/w-d-xo.htmlsi=v186RVQXlcVJEdDd
@@Kireth oh okay my bad! Will check this out :)
My settings to try
Strength: 5Nm or higher
Angle: 900 adjust per car basis
Vibration On
Steering: Simulation
Traction Control: On or preference
ABS: On or preference
Stability Control: On or preference
Deadzones: All Default
Vibration Scale: 100
Force Feedback Scale: 100
Steering Self Alignment: 180
Mechanical Trail Scale: 200
Pneumatic Trail Scale: 90
Road Feel Scale: 200
Load Sensitivity: 50
Wheel Damper Scale: 200
Center Spring Scale: 100
Dynamic Damper Behavior: 0
Steering Sensitivity: 25
Steering Linearity: 0
I am using the g923 and i know its not a direct drive, but this helped massively
this has gotta be for Direct Drive wheels only. this felt absolutely AWFUL on a Logitech G923.
Fr, it felt so loose
Feels just as loose on a 5nm direct drive wheel as well gotta go for around 20/30 rather than 0 of the center wheel settings
What settings do you have? I got a g920 and it’s basically unusable
I was bout to say this is the worst guide I've ever fucking used lmao
Never mind these settings...G923 is terrible when driving. Absolutely no traction control. Change back to controller and there's full traction control
Nothing is better than a player with real life racing experience. Thanks for your time and effort 😎✌
you're welcome!!
Finding best wheel settings on Forza:
8:41 “Buy a Mazda”
-Kireth
Can't go wrong
The moment you said u were using a Moza R9 my heart skipped 2 beats out of pure happiness because I happen to own the exact same wheel!!! I'll start playing on normal release, upcoming Tuesday and watched so many streams/video's where the driving on a wheel looked absolutely HOREENDOUS and the people playing had no idea whatsoever that it was off but I could tell just by looking at it.
You have no idea how exited I am to try these settings on day one upcoming Tuesday!!!!!
You're in luck as I'll be posting a lot!
Same :) I just picked up a r5 kit a week ago so excited to try it out
Same!.. R9 w/12"ES. this is really good news! I went back n forth with this all night last night/mrng, and this afternoon I view this post. I get the "jutter' now in the M4 '21. pithouse is maxed out. but what about 'wheel friction', I figure on using it.. also, Q: where is the MX5?
Wow! I put ntrl-inrt and whl-frctn to half and no more deadzne. yay!
Double Wow! now ntrl-inrt is max. whl-frctn adds weight/dampen (10%) soo far.
Ok! '16 MX-5 for 45k lol.
Awesome!!
I had to tell FM my Gpro was a G923 but with a bit of fiddling with the settings the Trueforce feels great .it's different from gt7 but just as good in it's own way .Cheers for making me aware of how good the game is ,i'm really enjoying my racing again.
Is this a PC only? Just tried it on my G920 on Xbox and it feels even worse. Undrivable
Thanks I’ll try these on my R9. I’m running the exact same setup. (Fanatec pedals as well)
Let me know what you think!
Looking for good settings for thrustmaster TX if anybody can point me in the right direction. Thanks
Vibration Scale 60
Force Feedback Scale 100
Steering Self Alignment 100
Mechanical Trail Scale 85
Pneumatic Trail Scale 130
Road Feel Scale 140
Load Sensitivity 90
Wheel Damping Scale 15
Center Spring Scale 10
Dynamic Damper Behavior 85
Steering Sensitivity 50
Steering Linearity 50
This is a good base to start with belt or gear driven wheels. Everything else default but deadzones set to O and 100. Set it to simulation steering in the other option screen on game
Great video I used your setting as a baseline to what feels good to me, but overall I didn’t adjust too much from what you had. Thanks!
Awesome glad to hear it!!
Would you be able to share your Pit House settings for your Moza wheel? I've been playing around with the FFB and I can't get it to feel quite right. I'm going to try out your in-game settings and see how it feels.
Yep but basically 900 deg rotation and 100% force
Dude, you should check your Miata's steering wheel hydraulics. 200 strength is too much, even for my Fanatec Clubsport 2'5 base. In my case, "zero" for steering self-alignment makes the car feel like the steering wheel was turned off. I increased it to 40 and lowered the center spring scale to "zero". And, for the road feel scale, I set it to 20 (this way I can feel curbs, etc). Now it does feel great. Thx!
I had the same thing happen with my dd2. Both mclaren wheel and formula v2 felt like there was no force feedback. The steering was so floaty with no stiffness at all. I thought it was broken or needed an update until I started messing about with the one setting he insisted shouldn't be a thing...the steering self allighnment. The other settings worked OK for me. Just that one that nearly broke the game for me. I had almost written it off and going back to starfield and gt7.
Guys... if you have to run a direct drive wheel at 200 then surely there is a fundermental problem with your setup!
Even if you don't run the R9/ES combo, this is the first videeo to watch after owning and installing this title. Now i'm off-and-runin'. Thank You Kireth, you alone restored my faith in FM8 1.488.4138.0. T10 owes you a debt of graditute for shedding lite on this ffb mystery. looking forward to hearing more. ty
Thanks man!!
The vibration setting is a canned effect and is not meant for dd wheels. Center sprig should also be off or very low as it forces the wheel to center, also canned
I found the return to center wasn't strong enough on default, compared to real life
what does canned effect mean?
@@justinburley8659 canned is when the effect isn't coming from the physics. Instead the developers added it for weaker wheels like the g920
@@Kireth it feels very fake to me.
@@mitcheighty1354Have you raced MX5s?
Central spring scale should be 0 or super low, unless you play on wheel whithout normal ffb. Just sit in real car and turn the wheel, it won't move to the center by itself when the car dorsn't move.
Hmm i just cant get my settings right for a g920. As soon as i touch the break even slightly, without turning the wheel at all the car starts spinning off the track :/ This definitely isn't realistic, I drove an Evora in real life the other week and gave it a real go, for some reason its like the the road surface is like ice on FM when using a wheel, actually so much easier using a controller... AND in real life :D Any idea's?
I do not have the game yet but saved your video as a starting point for wheel set up.
Let me know what you think!
Anybody have anything for the Logitech g920? I feel like forza just doesn’t put out enough. Barely feel curbs and stuff I can out my FFB to max and it’s still so light
Check the in game telemetry and make sure you are not clipping. High settings can lead to the wheel torque maxing out, meaning you will feel nothing else at all when it does this.
@@Kaylos29 alright yeah I didn’t know that was an option that’s what I wanted thank you. I can use that to help tune it so much easier
@@Jonusbiker No problem. Glad it helped you. A G920 is a pretty low torque wheel, so you not likely to be able to get a strong FFB without clipping a lot.
Solid tips!
See if this works
Angle: 900 adjust per car LMP 360
Vibration On
Traction Control: On or preference
ABS: On or preference
Stability Control: On or preference
Deadzones: All Default
Vibration Scale: 100
Force Feedback Scale: 100
Self Center Alignment: 180
Mechanical Trail Scale: 200
Pneumatic Trail Scale: 90
Road Feel Scale: 200
Load Sensitivity: 50
Wheel Damper Scale: 200
Center Spring Scale: 100
Dynamic Damper Behavior: 0
Steering Sensitivity: 25
Steering Linearity: 0
If I so much as touch the brake my wheel violently vibrates thrust tmx
Have you mapped the same axis?
Thanks, I thought the force feedback was terrible, this fixed it all
Love it man 👍👍
Do you not get really strong oscillations in the wheel with the center spring on?
cs with ffb on 200 it oscilates all the time
I don't at all on my moza r9
Running a CL_DD here and these settings are way to light, there seems to be zero resistance in the steering.
Same here. The feeling was so light that it felt like the wheel was powered down. CSL DD with GT3.
CSL DD has less nm than my Moza - this might be why I'm able to lower some settings
Hello , i have a thrustmaster t150..
I just bought forza for the first time (forza motorsport)
It worked very well at the beginning , it was pretty close to perfect.. but after few career races i would try online , but my wheels in game where going left right left right etc…
I delete the game and instal again but now my steering wheel is not detactable anymore ..
Ive tried some things from youtube but it didnt work..
Somebody had also this problems ??
Thxxx
Thanks for this! I’m new to sim racing with a wheel I just got a CSL DD with the GT3 wheel 🛞 I’m definitely going to try these settings out ! Big ups
Same setup I'll be trying these as well
Please give your feedback and my simulation settings video goes up tomorrow 🙌🙌
@@Kireth so far so good these have been the best settings I’ve tried yet. I did have to turn wheel sensitivity up to 80 it just felt right for my set up personally.
@FMwin900 awesome to hear man!!
@@FMwin900you have the 5nm or 8nm boost pack? I found some settings on the fanatec forum that work pretty damn good as well I'm gonna try these ones when I get home though
I haven’t played a racing game since Forza 4… I finally bought my self a really good setup for racing, found out this was coming out, played lastnight and damn this game is bomb! So much effing fun!
Love the spec style of online racing so far. Very equal.
I played respectfully… some others did not, that is my only gripe
Safety rating should do its work 🙌🙌
Buy ACC, this game is awful on a wheel regardless of settings.
Can we get a new version of this set up or are you using the same settings
This is by far the best settings i found, wow i was so close on giving up on Forza, please share your pithouse settings on your R9, i got R12 so should be close.
Thanks man!
Always enjoy trying out peoples settings thanks for the video, personally really enjoying the game.
Thanks man I'm enjoying it too!!
Do you know how to fix the traction control on the wheel? Full throttle on the controller, no wheel spin, full throttle on the wheel, lots of wheel spin.
i cant play with this settings ;D the FFB is just to weak even on a r21 lol
That should NOT be the case
I played forza on xbox for the past year on the logitech pro wheel and pedals i now have a pc and the wheel just runs horrible on the game anyone have setting recommendations? I also tried the wheel out on WRC and everything works as it should its just forza
I'm feeling the spring inside the wheel lose near its center. I feel it bouncing sideways while I'm holding it straight still, the spring starts going left and right like a pendulum. It is more noticable driving the fastest cars in game. It's been terrible. I have a G27
Thank you for this! Looking forward to trying out these settings.
Let me know if you have any feedback 🙌🙌
@@Kirethyoooo! These settings are legit! Only thing I changed is slightly lower vibration cause it feels a little janky on my T248. Thanks again! This has massively improved the feel of the game for me!
What should I do with my actual wheel software settings. I feel like that is my unknown
Which steering wheel are you using?
And what’s your setting on the wheel ?!
Thanks
Such a great setting and I’m on the Logitech G923! Thanks
Love to hear it man!!
if anyone knows good settings for a t150 wheel please let me know
Vibration Scale 60
Force Feedback Scale 100
Steering Self Alignment 100
Mechanical Trail Scale 85
Pneumatic Trail Scale 130
Road Feel Scale 140
Load Sensitivity 90
Wheel Damping Scale 15
Center Spring Scale 10
Dynamic Damper Behavior 85
Steering Sensitivity 50
Steering Linearity 50
This is a good base to start with belt or gear driven wheels. Everything else default but deadzones set to O and 100.
Can you share screenshots of pithouse please?
Will do 👍👍
I’m gonna try ur settings on my thrustmaster see how it goes. Maybe the road feel is why it’s vibrating up a storm
I have to reduce wheel damping scale on my tsxw to reduce judder but he's got it all the way off already so i don't trust these settings I'm sorry. Having 200 on ffb strength is just so much extra. And most sims say to drop center spring off near 0 not increase it like here 👎
@@benwinters7147wheel dampen at 0 shuts off ffb completely on mine
Maybe up wheel rotation?
@@Kireth it’s all the way. I have a podium f1 dd1 but only qr2 I have is on my PlayStation rim, I’m gonna undo the qr and put it on my Xbox rim so I can give this a go with the dd1 and try ur settings there. On console sometimes the belt wheels work better, but I guess not in this case
Just tried these settings with the Thrustmaster T300 and unfortunately they don’t work well! The judder effect is way too pronounced and turning the Road Feel Scale to 0 gives no feel in the centre, even with Centre Spring Scale turned up to 150. IMHO the Road Feel Scale needs to be at least 130 on the T300.
Anybody else having issues with the ffb on moza r5 being extremely weak, I can steer with my fingers and have force feedback scale to 200 with outhouse maxed out
I wonder what reference they were using for the default settings?
They got someone to eat a whole box of laxatives and got him to aim his shltter at a blank Y/X graph.
Transcribed the speckled inputs on the graph in to computer code and voila.
Force feedback settings 👌🏻
ChatGPT
Is there a way to decrease wheel rotation degrees? To turn less on the wheel and more in game?
So my question is with these settings can you feel the over and understeer of the car when its happening?
You can feel understeer more than oversteer, but yes (it's hard to feel oversteer in any sim as in real life you feel it through your butt)
Well, that's what mechanical and pneumatic trail are for. You NEED to feel oversteer through the wheel, and you feel understeer through "leaning" on to the grip (against FFB) and feeling it "give in" - your settings instead give a fake impression by the fake rumble coming from the canned vibration setting - which I would turn off entirely.
If it works for you, fine. But sorry, for me these are pretty objectively the worst settings I have tried yet. There's basically no information of what's actually going on with the care, just for some rumble effects and some needlesly heavy centering spring, which in return kills all the ACTUAL crucial information.
@anselmbuder what sensation do you want to feel through the wheel when oversteering?
@@Kireth it's actually pretty hard to describe, as it's more a intuitive thing. But I'll try.
With a "correctly" (in my opinion) FFB, say you maneuver a RWD car out of a right hand turn. In doing so, you obviously turn the wheel to the right. In the clockwise movement of your wheel, you should work against FFB, which in this case ideally signals you grip from the front tires, so basically you feel (the lack of) understeer from the pressure working against you turning the wheel to the right.
Oversteer you can "feel" once you open up the wheel again while accelerating out of the corner. This opening up should feel somewhat "neutral" against the force you were leaning against before, when NOT over steering. Once you start to oversteer, the wheel will quickly feel light in the counter clockwise direction, if you would let it loose now it would spin ccw by itself. There's your oversteer FFB.
It's probably more nuanced, and it is really hard to describe, especially since both forces I tried to outline in my example are basically both time just the motor "turning ccw", yet once it's understeer, once oversteer. But that's kind of the point in my initial criticism: our motors can only do two things: turn left or turn right, in somewhat smart ways guided by the FFB algorithm. So damping those two forces by constant, non responsive settings like fixed center spring or canned rumble effects, you take away forces that could be used to deliver sensitive, adaptive informations like I tried to explain here.
I am planning to get a PC and the only thing stopping me from selling my PS5 by that point is a GT7 alternative (I don't play it anymore because of the recklessness). This video gave me a lot of hope!
You have Normal steering on. Thoughts on Simulation steering?
Separate video coming comparing the differences!
Great to see you on FM
I'm back 🤘🤘
How do you like picture / performance so far?
Video coming!
In some wheels there's also an issue ,where if feels like the FFB snaps as soon as you turn the wheel. Switch Invert FFB option from where you have it and it should solve it. Happened on my TM T-GT2, turn the wheel 5-10* and it felt like i was side swiped by a car
Yep I had that the first time!!
Yeah I had that, took me far too long to figure that fix out. I haven’t found the settings sweet spot yet with the tgt-2
Looking for optimum setting for the g923/g920 if anyone can help?
Post your current settings here so people can see!
There a vid on you tube now
@@Kireth been using dd settings but it’s not great
I look forward to playing on my Logitech Pro DD!
That's what I use for GT!
Very good comparison. What do you think about the Forza Understeer "FFB effect" compared to your real madzda?
I can 100% see what they are trying to replicate and if you understand it as signalling you are exceeding the tyre grip you can find the limit easier 🙌🙌
So far your settings the best at least I can somewhat control the car , I keep having an issue with the car swaying left and right , I am using a TMX racing wheel .
Another issue I am having is Its stuck at aa 270 degree rotation , even if I have my setting on the actual wheel to 900 once I play Forza I am only getting 270 , and there is no option in the game to change this .
Thx will definitely start with your settings next week
I try it on my t300 rs and it felt very good. Thanks
can I use my Simucube 2 Sport with this game? Thanks
Are settings the same on both XBOX and PC?
I'm on PC
I will be playing it on XBOX. I wondered if the wheel settings are the same for both. I suppose they are.@@Kireth
Man, try inverting FFB, restore to defaults and start from there.
Although its a shame the Default settings aren't more playable. At the end of the day. if you can make it feel good after some tweaking thats good news.
most people who own wheels are usually used to having to fiddle with settings for some reason anyway. and videos like this help.
I just want to jump into it when it comes out, so ill just use your settings. because even if they aren't perfect for me i can just use yours as a more Drive-able base to set up my own.
How's it been the past month? :)
@@1MantisPhoenix they forgot to actually release most of the game and it crashes every 2 seconds so.i dont bother playing it.
Pretty big joke of a release. Less content than forza motorsport 5 had. How that is acceptable is beyond me.
Tx Wheel swttings work with this?
You're the only person I've ever seen who keeps the centering spring on.. let alone turns it up higher than the default.
I keep the center spring on as well. It does feel more realistic
I tried these settings (on a different wheel, but still) and they feel like hot garbage, sorry. There's basically zero FFB information coming through.
Interesting!!
I need the settings for thrustmaster tmx pro for Xbox, can anybody help me?
Vibration Scale 60
Force Feedback Scale 100
Steering Self Alignment 100
Mechanical Trail Scale 85
Pneumatic Trail Scale 130
Road Feel Scale 140
Load Sensitivity 90
Wheel Damping Scale 15
Center Spring Scale 10
Dynamic Damper Behavior 85
Steering Sensitivity 50
Steering Linearity 50
This is a good base to start with belt or gear driven wheels. Everything else default but deadzones set to O and 100.
hopefully when the 10th comes around it will be some tweaks that are not in the early release stage
I wouldn't be surprised 🙌🙌
These don’t work at all on the XBox with the Logitech G Pro wheel. There’s basically no resistance to turning the whee. I thought everything was just switched off. The juddering through cornering is out of control high though.
I have the G Pro as well so will be tweaking settings for that and trueforce
Here you go
G Pro
Strength: 5Nm
TF Audio: 50
FFB Filter: 10
Dampener: 100
Angle: 900 adjust per car LMP 360
Brk Force: 15
Vibration On
Traction Control: On or preference
ABS: On or preference
Stability Control: On or preference
Deadzones: All Default
Vibration Scale: 100
Force Feedback Scale: 100
Self Center Alignment: 180
Mechanical Trail Scale: 200
Pneumatic Trail Scale: 90
Road Feel Scale: 200
Load Sensitivity: 50
Wheel Damper Scale: 200
Center Spring Scale: 100
Dynamic Damper Behavior: 0
Steering Sensitivity: 25
Steering Linearity: 0
...do you have some settings for the Logitech G Pro already??
I see you upgraded your pc for this game. Good man.
that judder is awesome
🙌🙌🙌
@@Kireth loving that tyre rumble felt beneath.. they've captured something special there.
I didnt have any issues with defualt settings on my Simagic Alpa Mini Direct Drive. The only thing I had to do was turn down the ffb to 50% and invert The ffb using fm5 Presets. So I'm guessing everyones settings will differ froM what wheel base they are using.
Yep that's awesome you had a good experience out of the box 🙌🙌
Thanks for the video now I can handle cars better❤
Now you can show your true speed!!
Lol😂 these settings make my tx feel like I'm driving a kangaroo. Feels like ass
that judder you’re talking about is a camera option…
No It's judder in the ffb mate
Hey kireth, i thought you used the logitech g pro wheelbase?
Yep I use that on playstation
Ah I see, I thought you were playing forza on pc. My mistake. Any chance you have settings for the logitech on pc forza? Thanks.
These settings do not work at all for thrustmaster T248
I have the T248. Have you found any settings for it? I cant see anything out there yet.
@@Rich-pj9wvOverTake_GG has some okay settings the video is a Force feedback guide tried it for about 5 mins and so far so good
Is the FFB too weak?
I am not sure what went wrong but these settings gave me almost 0 FFB on my DD1. I had to go back to another youtubers settings as that does provide the ffb. Again, not sure how, but maybe you're racing without it? lol g
Have you done an irl racing videos? Would love to see you race in real life.
Yes they're just hard to find but I have compared my ferrari gt3 drive with sim racing 🙌🙌
Awesome! :)
You have normal steering on. It should be simulation or else you play with the input filters for controllers. These settings are to overcome that critical option you forgot to change. This isn't going to work for most people.
I think you interchanged "Self-Align" and "Center Spring". Self-align is the correcting force of the wheel coming from the tires. Making the car going straight again by itself when it is moving. Therefore, should be reasonable high. Center Spring is the aktive centering force of the wheel, independent of movement (like the auto centering of a joystick). This should be (close to) zero (like a car on a lift, wheel stays wherever you turn it).
When the game tells you to use the keyboard instead when using a wheel... From the ground up!
My thrustmaster tsxw vibrates ALOT in this game. I had to put the vibration to 5, and it’s still somthin fierce. Something’s off there.
Drop the wheel damping scale 👍 i have a post on reddit forza and thrustmaster with my settings for tsxw 😁
@@benwinters7147drop a link please I can’t find it
It seems like you can't quite feel the rear through the front
You mean the rear lifting and moving under braking?
You def do need steering self alignment!
I've been posting saying since day one of GT7 that the game needs more options to customize the FFB, even if its not so bad, it is still far behind many racing games and I think that it could be much improved, iv only we had the possibility to do it...good to see that forza gives you the chance so play with so many settings
Yeah GT7 doesn't give you as many options but it's better out of the box tho
@@Kireth It would be a game changer for GT7, maybe one day... fingers crossed
I actually had to stop playing gt7 for a bit because the ffb was so bland and boring. Luckily they made it better a few patches ago. Why they don't have more settings for it is mind boggling. Only thing that brings me back to gt7 every few months or so is vr. I play mainly single player and the "single player" content is non existent once you get gold on all the trails and track experiences. Think the worst part for me is the ai. It's completely atrocious and I don't even feel like I'm racing. Wish they could implement sophy
In my opinion, when it comes to GT7 and wheel settings, I set them once almost 10 months ago and it's great, I don't see any reason to change anything, I don't need any more setting options.
@@vibovit9851 I can keep the same settings using GT cars, but the problem is that if you use a street car you don't get enough informations from the wheel using the same settings... It's ok to feel the difference, but in my opinion the ffb doesn't scale correctly. In addition to that I miss a lot of details that I feel with other sims, like many curbs that you are supposed to feel. So probably there is too much dampening that I would like to turn down but I can't... ironically the ffb was better in gt6 for ps3
worts setting for the g29 the steering wheel turn way to fast and so badly bad
Thank you
np bro!
Who fix shake fix the wheel on fanatwc cls dd
why doesn't GT7 have this kind of in-depth wheel settings.......
I think the game feels good with a wheel. Still give GT7 an edge, but forza is still fun.
Av just got a g920 for this game am not a settling man at all so hope default is OK with me lol
Isn’t that an NB you are actually racing?
Yes different gen
@@Kireth I race an NB as well.
So on the tsxw your settings completely turns the wheel off. It’s like dead 😂. No ffb whatsoever
Yeah, center spring scale does almost nothing, at least on a non DD wheel. Steering self alignment is the combination of pneumatic and mechanical trail, so at 0 there is 0 torque steer. Center spring scale is supposed to center the wheel without outside influence, but when you check telemetry it falls off a cliff when turning, and at least on my wheeel doesn't even center it letting, but just slighty moves towards the center before stopping. If you want a smoother FFB experience, use more mechanical trail over pneumatic. Pneumatic is useful for the feeling of traction loss, especially on understeer, but the drop off in alignment makes feeling the car impossible by itself. And then when you are losing tractio and regaining at the edge, pnuematic goes crazy on the FFB.
Can you explain pneumatic and mechanical in laymans terms 😅
@@Kireth Hard to do. Mechanical is strictly the alignment of the car. So it provides rear end feel, as the FFB ramps and then goes steady at peak traction and over. It is also smooth with no other detail, but you could play then game effectively with mechanical alone. Pneumatic ramps the alignment until peak traction and then drops of as the tires start slipping. So once traction is lost, there is no feel, and at the edge of traction is goes down and back up as the tires lose and gain traction. This makes FFB very erratic by itself, but is good detail to supplement mechanical as the main driver of steering alignment. Hope that helps.
@@Kireth Also you need Steering alignment scale as it is a combination of mechancial and pneumatic. Without it, neither has an effect at all. You can use that to adjust the two togwether independant of other FFB settings.
thank god it wasnt just me lmfao I couldnt even tell why the game felt so ass to play
I can’t even get my wheel to register
8:40 Seems extreme to go out and buy a Mazda just to compare real life to a sim :D
I wish 😅😅
I wonder if this works on all wheels.
Let us know!
Doubt it as there are gear, belt and direct drive wheels. But a good starting point to help set your wheel up.
Tried this on my Logitech wheel and it was not drivable.
On XSX and TX wheel those settings are unplayable :D I have like almost none ffb :o
Vibration Scale 60
Force Feedback Scale 100
Steering Self Alignment 100
Mechanical Trail Scale 85
Pneumatic Trail Scale 130
Road Feel Scale 140
Load Sensitivity 90
Wheel Damping Scale 15
Center Spring Scale 10
Dynamic Damper Behavior 85
Steering Sensitivity 50
Steering Linearity 50
This is a good base to start with belt or gear driven wheels. Everything else default but deadzones set to O and 100.
Ok this advice might be great for someone with the same wheel as him. However I tried these settings on a Thrustmaster TS-XW and horrifying. No feel at all. Dreadful.
People are saying that on the ts-xw!!
What's working for you instead?
Just tried your setup on my tm tx458 Italia edition and it felt pretty good, had to make the wheel feel a bit heavier for my liking, but overall decent starting point, thank you. 👊🏁
Awesome! I have my simulation setup coming tomorrow which is more detailed 🙌🙌🙌
So as of now, what is better? GT7 or FM8
@@Kireth
Yo I have the same wheel can I get your settings to try out
@@mikebos5072 I ended up trying a different setup from another YT video and then tweaked it a bit, currently have wheel apart as having ffb issues, upgrading the fan and ventilation, I will send you my settings a few days as been messing around with them trying to sort wheel out.
@@mikebos5072 do you still need settings? finally got wheel sorted.
12th dub!
Make a vid how many dubs I got
Bro how do you keep getting these dubs?? 🏆🏆🏆🏆🏆🏆🏆🏆🏆🏆🏆🏆
@@Kireth I am subbed with all notifications
@@TanzilaSahiPro strat 👍👍