Idk why but watching Will try to clean oil up with paper towels had me screaming OIL DRY or cheaper yet KITTY LITTER.. The haggard garage spirit lives on with these two
you don't even need kitty litter. they can just go outside the garage and grab som gravel and throw on there or just sand. i usually use sand from the playground near me when i need to clean upp oil spills
kitty litter or floordry/oil dry makes a huge mess. I'd do the exact same thing in my shop but with old shirts and tonn of brake clean. I also buy it by the drum so I don't really care how much I use....but its WAY cleaner.
@@JackDarby THIS. I'm the same age as Will and the feller is in the perfect environment to really hit the ground running with project cars, and yet he's always busy workin on other peoples stuff. My guy deserves a drift car
Keep 1 sack of REGULAR plain kitty litter around. Make a spill kit for your shop area and set it somewhere visible with signage. The kitty litter is cheap and better to sweep up those immediate emergency spills.
Dude that’s freaking craaaazy If that happened to me it would have been hella hard to not give up for a few days props to the dedication to the car and the channel dude. Love the content as always it honestly keeps me going
The post office will come pick up all your orders free of charge, it'll save you some time and trouble, just call them to schedule a pickup. I work at the post office and don't have to do pickups often, but I did one right before Christmas that was a whole U-Haul van full, front to back just above window level from a local cheese place, your orders shouldn't be a problem.
For those of you complaining about using the paper to roll his fenders, ppl have been doing it that way for many years some use bats some use actual rollers and some use phone books
Phone books on a hot summers day worked an absolute treat for my buddy when we did it. Well we used catalogs from a clearance store but it's all the same when you slam that jack down and it pops the fenders out slightly
I've used all kinds of stuff to do it my favorite is a baseball bat lmao specially when u don't care about the car and u just watch the paint chip off lmao but the best method I've found is phone books or something similar I've used jack handles a few times and did pretty well
Order the oil pickup with the pan. Especially since it's a drift car. You want to be sure that the pickup isn't to high. I've had a pickup unable to pull oil. Drove me crazy why I wasn't getting oil pressure on a fresh build.
It's not Will's fault, you should never ever be messing around with hydraulic lifts. That could have been some ones head or something. Not to be a debbie downer, but you really can't mess around with stuff like that.
Why would they hold the car up with someone's head? Something something thick headed no... I got it stand by... Could probably park a car on your skull seeing it's so dense boom gotem
The c clamp style will work well also. I usually put pressure on the ball joint then tap the side of the ball joint itself and it lines up and drops in with very little effort. The press is a great all around tool. Worth the money.
Bro the car falling off the jack and busting the oil pan was pretty damn funny. But nothing will ever beat when he punched the civic windshield and busted it by accident that shit killed me bro.
Shout out to harbor, I just finished a frame swap on a Silverado and had a engine beam like that and used harbor freight ratchet straps to hold the engine and trans to the cab
Have that same engine support brace. Just used it a few months ago to drop the trans on my volvo to upgrade clutch and flywheel. The problem is the cheap metal on the threaded hooks. Few up and downs and the weight rips the threads right off. Used a prybar to spin the giant wingnuts.
Chris, if you ever do ball joints like that, put the ball joints in the freezer for 12 hours before to shrink the metal, honestly helps alot! Plus you could heat the arm up slightly to expand the opening
Hey bud had a similar day everything fucking up don't stress it pumped to see you show everything bad and good I love it seeing that's how it is for most of us lol
god bless guys, we all been there for days like this lol. sucks but if you can remember to laugh you are on the winning side, its when you cant laugh that you truly lost.
I feel you guys. Been having to deal with the same shit but thats what makes you keep workng cause when you finish a hard as fuck project you get releafed. Keep it up!!!
Damn that sucks ,I was laughing till i saw the puddle of oil. I started to laugh when I saw the jack stand but at the same time my heart kinda sank. Iv been in shitty circumstances because of my mistake ,I kno the feel bro not good. Also Im gald I could be part of the merch sale good shit man cant wait to see whats next!
I know it's been a while since you started using final cut, but just wanted to let you know the quality has been amazing recently, stoked to see what 2022 brings!
You might have been able to stick the ball joint in dry ice for a few minutes and heat the control arm up a bit and drop it right in or easily press in. It works on a lot other things that are Interference fit like bearings and crank pulleys and sleeves but never done it on ball joints but I don’t see why it wouldn’t work. Just don’t get it hot enough that it’s going to burn the rubber out of it
amazing how the post office gets aggravated when you bring in big orders. we shipped 700+ items several times last year and they were so nasty we found another post office
@@mattsmith9136 forreal they work like 6 hours a day 😂😂 all the holidays off and weekends and then get mad when they get overloaded with shit on a monday
Boots come off of ball joints for future reference, it just has a circular metal clip that holds the boot on. It’s good practice to take the boot off before you press in a ball joint to avoid any potential rips to the boot.
Will feels so badly ! We all been that guy. Take it easy on him! Especially you Rudnik we know you have done worse!! 😆 🤣 😂 😹 $180 ant shit compared to what you make in veiws on TH-cam....lol not your fault Will !!👌 👍 🤣 😉
every video im surprised chris doesnt have the right tools lol like a fender roller would be a first pick for a shop like his and yet he's struggling with boxes lmfao
i love watching will clean up the oil spill with the most expensive paper towels he could find, knowing that the 180 dollar oil pan was destroyed to avoid buying a much cheaper fender roller.
Put a jack handle between the tyre and the wheel arch, lower it down and roll it backwards and forwards..... Its ghetto as fock and it could tear the arch but it definitely works and it's smaller diameter than a bat
love how tommy disappears after the pan gets destroyed mans a genius
Ain't nobody got time to deal with rodknock and will.i.am's hoonery
And someone just happen to call him…hmmmm…
wills the one who decided to use 1 jack stand on the front next to the oil pan instead of just using 2
couple of goofys lmao, why did they even entertain tommys idiot papers idea in the first place horsing around -,-
Dude was scheming all along 🤣🤣
The jackstand hanging from the pan had me laughing my ass off😂
Seeing the stand through the oil pan was too fucking funny.
he should have done a closeup of it stuck in there haha.. 8:11 is all we got.
Right lmao
Holy shit that was hilarious
Saw the oil puddle and was like yup shoulda waited for the front wheels to be back on
@@BOOT forreal and used a fender roller 😂😂
Idk why but watching Will try to clean oil up with paper towels had me screaming OIL DRY or cheaper yet KITTY LITTER.. The haggard garage spirit lives on with these two
Those paper towels are expensive too
LITERALLY, THANK YOU
you don't even need kitty litter. they can just go outside the garage and grab som gravel and throw on there or just sand. i usually use sand from the playground near me when i need to clean upp oil spills
Could’ve just mopped it to
kitty litter or floordry/oil dry makes a huge mess. I'd do the exact same thing in my shop but with old shirts and tonn of brake clean. I also buy it by the drum so I don't really care how much I use....but its WAY cleaner.
Will has definitely taken rodknock luck to amazing heights. Chris you've been dethroned.
I'm fucking crying. Tommy dip set on que, had me rolling.
*The ups guy is gonna be stoked on his new AirPods when they fall out of the bag*
With u there. Would’ve liked to see a box
Love the ad placement when Josh comes to town. Also.. "no heat" and Josh is casually roaming around in shorts and a tee...........
Utahn in Connecticut
Could have just purchased a fender roller and prevented all of this. Would have been cheaper too lmao.
Don't they sell those at harbor freight? So I'm sure it was available fairly close
Or baseball bat and drive forward...
this is what i did was like $50 on ebay and was easy as
If it had front wheels it would of been swt the gaurd rollers are shit
exactly the comment I was looking for!
Will is just a real dude all the shit he puts up with and is still motivated and staying late with rudnik what a friend Will needs a raise lol
help will build drift car as well
@@JackDarby THIS. I'm the same age as Will and the feller is in the perfect environment to really hit the ground running with project cars, and yet he's always busy workin on other peoples stuff. My guy deserves a drift car
Keep 1 sack of REGULAR plain kitty litter around. Make a spill kit for your shop area and set it somewhere visible with signage. The kitty litter is cheap and better to sweep up those immediate emergency spills.
The dents in that clean 240 hood are icing on the cake
It's totalled anyways
Buys $180 oil pan. Doesn’t buy $60 fender roller
Plus hood 😂😂
He probably has one smh
@@zaceryhammond1144 plus new oil
Which one do you need?
stonebag garage logic
Dude that’s freaking craaaazy If that happened to me it would have been hella hard to not give up for a few days props to the dedication to the car and the channel dude. Love the content as always it honestly keeps me going
not will's fault at all, 1000000% tommy and rudnik fault
The amount of physical and mental pain was high when he saw the oil on the ground.
Welp. Round back the clock to zero for being accident free.
there's an accident in every video, nothing getting round back just how shit gets done in the rodnock garage
@@siennaracing638 not everyday a jack stand is hanging through an oil pan.
@@suvdrift that is true, it was an extra funnt fuck up lol
The post office will come pick up all your orders free of charge, it'll save you some time and trouble, just call them to schedule a pickup. I work at the post office and don't have to do pickups often, but I did one right before Christmas that was a whole U-Haul van full, front to back just above window level from a local cheese place, your orders shouldn't be a problem.
For those of you complaining about using the paper to roll his fenders, ppl have been doing it that way for many years some use bats some use actual rollers and some use phone books
Phone books on a hot summers day worked an absolute treat for my buddy when we did it. Well we used catalogs from a clearance store but it's all the same when you slam that jack down and it pops the fenders out slightly
I've used all kinds of stuff to do it my favorite is a baseball bat lmao specially when u don't care about the car and u just watch the paint chip off lmao but the best method I've found is phone books or something similar I've used jack handles a few times and did pretty well
@@seanheavner358 yea I guess there is not limit for creativity. We sound like we get along nicely irl 😂😂😎
I used a 3inch metal pipe 😁
10/10 those air pods are gonna rip thru the bag and fall out lmaoooo
Judging from my experience shit like that is fine 99% of the time but thats with the bags I use at work, the ones chris look really thin
@@Csrrs13 i'd be more concerned about the edges of the box puncturing the bag, but i think they should be fine
Tommy is the ultimate instigator 😂😂
Didn’t know that rolling rear fenders could bust a oil pan 😂
LMFAO!!! Love how tom leaves the room real quick.🤣
I'm in legit tears. Definitely needed that laugh today. Rip oil pan
Order the oil pickup with the pan. Especially since it's a drift car. You want to be sure that the pickup isn't to high. I've had a pickup unable to pull oil. Drove me crazy why I wasn't getting oil pressure on a fresh build.
These kids are amateurs
It's not Will's fault, you should never ever be messing around with hydraulic lifts. That could have been some ones head or something. Not to be a debbie downer, but you really can't mess around with stuff like that.
Guaranteed it won't happen again
Why would they hold the car up with someone's head? Something something thick headed no... I got it stand by...
Could probably park a car on your skull seeing it's so dense boom gotem
@@boxedfender4810 just a ludicrous example.
@@ph0pe that guy rocks
@@PolumbiusTheThird Smh.... It is a word, please say you're messing with me.
You got us waiting bro .. becoming a every other, other day vloger now lol
The c clamp style will work well also. I usually put pressure on the ball joint then tap the side of the ball joint itself and it lines up and drops in with very little effort. The press is a great all around tool. Worth the money.
Press can pay for itself quite easily, if you do your own wheel bearing, like on a subaru it pays for its self on one hub.
Probably THE funniest moment I think I've seen in a long time from this channel!! I laughed soooo hard!!
this episode was filled with disasters, great content!
Bro the car falling off the jack and busting the oil pan was pretty damn funny. But nothing will ever beat when he punched the civic windshield and busted it by accident that shit killed me bro.
Facts! 😂😂😂
This was setup right? No way you guys are this dysfunctional.. is there? Keep up the great work
It's real
Real Stonebags 😂
Shout out to harbor, I just finished a frame swap on a Silverado and had a engine beam like that and used harbor freight ratchet straps to hold the engine and trans to the cab
At 12:08 Another Rudnikism The oil pan is clean we "Wire Wheeled-did-it"
I was hoping somebody caught it😆❤️
Dude you always forget to thank Hurrican Ian man. Car is really getting there, can't wait to see you send it.
he got him real good a few vids ago
"Its almost vertical" i swear at this point he does it on purpose lol
LMAO, Rudnick is awesome but def. not the sharpest knife in the drawer.
😂
Tommy's funny he could tell what was going too happened. "Grab a jack " 🤣
It physically pains me to watch you guys work on stuff, but at the same time provides good entertainment. Keep it up lmao
@24:53 im so OG i remeber that penguin from when you had your last 240 that you scrapped. old schoollllllll
Have that same engine support brace. Just used it a few months ago to drop the trans on my volvo to upgrade clutch and flywheel.
The problem is the cheap metal on the threaded hooks. Few up and downs and the weight rips the threads right off. Used a prybar to spin the giant wingnuts.
Same happened to mine after a few uses. That damn chinesium
Chris, if you ever do ball joints like that, put the ball joints in the freezer for 12 hours before to shrink the metal, honestly helps alot! Plus you could heat the arm up slightly to expand the opening
The pain in chris's eyes when the oil pan got crunched 💀
Dont forget to refill the OIL!!!
The angle kit looks sick
Hey bud had a similar day everything fucking up don't stress it pumped to see you show everything bad and good I love it seeing that's how it is for most of us lol
Sometimes u can use the the nut that goes on the bolt to squeeze into the control arm to seat it. If u use an impact so it cant spin on u
Love how your wearing a motion auto shirt while talking about your merch.
At least you pulled through to finish what you could. Making mistakes like that blow, but I'll bet it never happens again!
I looked away from my phone as soon as I saw the oil just like you did with the camera 😂😂😂
god bless guys, we all been there for days like this lol. sucks but if you can remember to laugh you are on the winning side, its when you cant laugh that you truly lost.
I feel you guys. Been having to deal with the same shit but thats what makes you keep workng cause when you finish a hard as fuck project you get releafed. Keep it up!!!
Get the gk tech splined s14 sway bar that will fix hitting sway bar at angle problem
you guys should buy some cat litter for oil spills it works really good and its easy to clean up
Tom cracks me up, the reactions is what does it
Damn that sucks ,I was laughing till i saw the puddle of oil. I started to laugh when I saw the jack stand but at the same time my heart kinda sank. Iv been in shitty circumstances because of my mistake ,I kno the feel bro not good. Also Im gald I could be part of the merch sale good shit man cant wait to see whats next!
I know it's been a while since you started using final cut, but just wanted to let you know the quality has been amazing recently, stoked to see what 2022 brings!
I rarely actually laugh on videos .. I was crying with the oil pan. Last thing I expected. Incredible.
I hope Willy doesn't get too much shit for this! Seems like an avoidable situation altogether. Keep up the good shit, bois
Will's mistakes make great content, I'm not complaining lmao
@@siennaracing638 it was Chris mistake for this one 🤣
Yup I was sad when the jack stand punched thro the oil pan when the car fell. But I am glad now one was under or anywhere near the front of the car.
Pack em if you got em 😎💨🏁
Dabbing "big Detroit energy" and "MAC 1" cured resin. Whoop whoop!!!
Stonebags unite
Am out of weed :(
Hittin some Space Cookies, and Sundae Driver cali gas
Purple cookies in em lungs 🔥
You might have been able to stick the ball joint in dry ice for a few minutes and heat the control arm up a bit and drop it right in or easily press in. It works on a lot other things that are Interference fit like bearings and crank pulleys and sleeves but never done it on ball joints but I don’t see why it wouldn’t work. Just don’t get it hot enough that it’s going to burn the rubber out of it
Crazy how you produce some of you're best content when you're "stressed out"
😂😳
@@Tool0GT92 if you don’t like it go somewhere else
@@Tool0GT92 absolutely
amazing how the post office gets aggravated when you bring in big orders. we shipped 700+ items several times last year and they were so nasty we found another post office
Goverment employees get used to minimal workload. Slackers
@@mattsmith9136 forreal they work like 6 hours a day 😂😂 all the holidays off and weekends and then get mad when they get overloaded with shit on a monday
There’s some post offices that get payed on the amount of orders they get, so if you find those offices they’re usually happy lol
Post offices and DMVs are the worst
@@Thatnegroswag My BMV (DMV) is always smooth sailing
U are the only TH-camr I watch that I haven't bought merch from had people tell me they never got there stuff
I’m proud of you ruddy. Excited for what this year brings for you
Boots come off of ball joints for future reference, it just has a circular metal clip that holds the boot on. It’s good practice to take the boot off before you press in a ball joint to avoid any potential rips to the boot.
This was probably one of the funniest videos I’ve seen in a long time
Awesome Sauce of an Episode!.....Officer Tom walking while shaking his head.....right after the Oil Pan busted...Hahahaha
They have heat in the other sections of the shop
I had the same ball joint issue with mine, the one that has the refill nozzle on the bottom did not want to go in..
Refill nozzle 🤣🤣
I was shouting at my screen when you were messing with the lift 🥴 dude sometime you gotta just think!
i lost it when the jack was stuck in the pan . Shit like this i will remeber for ever lmaooo love you guys
Awwwwww man! It’s always something bois😭 You live and learn
I remember how long 48 parcels took to post! That's a LOT of merch!
When the best makes mistakes, how we learn. Good stuff home slice, I love you show the bad with the good
Omfg this is the best video of you will and tom everrrrrrr
Will feels so badly ! We all been that guy. Take it easy on him! Especially you Rudnik we know you have done worse!! 😆 🤣 😂 😹 $180 ant shit compared to what you make in veiws on TH-cam....lol not your fault Will !!👌 👍 🤣 😉
Keep up with the daily content bro🤣 get stacking
Will is a he'll of a buddy and employee that's a hard working cat
Chris’s reaction to the angle was hilarious 😆
Ricer miata is so underated this Manz is funny.
Good to see you did the tie rods and ball joints spewing about the one side tho
2:24 look at the clock behind you, it says bada bing on it. That saying is the one rudnik says wad-a bing instead of bada bing to lol
Hey Chris you should order the new enduro battery for your GoPro. It records longer and does better in the cold
I love watchin you have almost as much bad luck with cars as I do :)
every video im surprised chris doesnt have the right tools lol like a fender roller would be a first pick for a shop like his and yet he's struggling with boxes lmfao
New Rudnikissm, " I just started bursting in laughter" lmao
Got you some tips! First get shipp station and second buy some gopro enduro battery ( for colder conditions)
Get a wood burning fireplace in the shop, Tommy owns all the land up the hill there and I'm sure there's tons of deadfall you could cut up
i love watching will clean up the oil spill with the most expensive paper towels he could find, knowing that the 180 dollar oil pan was destroyed to avoid buying a much cheaper fender roller.
Oh cool, nice to see someone ships their merch.
s14 turning out to be sick. Looks good and would be so much fun
Jz swap the 240 to make Tommy pissed haha.
Put a jack handle between the tyre and the wheel arch, lower it down and roll it backwards and forwards..... Its ghetto as fock and it could tear the arch but it definitely works and it's smaller diameter than a bat
that Team Glock banner in the beginning was sick as hell
Killing the vids Chris.
Love your shop man
I’m trying to place an order, but will only let me choose shipping to the states? You not ship to Canada??
run spacers in the front so you dont hit the sway bar, or get different wheels with better back spacing
The title gave me extreme anxiety that they were going to forget to put oil back in the motor before starting it…
Was waiting for that the whole time haha
can you weld oil pan?
Yo Chris shoutout to the merch I got the exact shirt I wanted the intercooler shirt
Seeing tommy do haggard shit is awesome. Deep down dude enjoys the ol junkspec
Definitely a bait n switch on that autozone special ball joint