I started this hobby a few moths ago. I mean my figures are really amateur looking and stuff but by watching your videos i get the motivation to get better and better
This was fun! Great job on the tattoo! I knew that was coming up lol! The skin tone was great! I can now see u trying out a Albedo from overlord now :p The blood effects and claws was sick! I believe u did well on the see though outfit, but i can agree with others its good to keep practicing! I can't say its bad cause i cant see colors super well but wat i see here is amazing! I can't wait for more bro! FMA is a great anime and wat a great choice of character to start with too!
So fuckin cool I think the only thing I would do differently would be to put verniz on her dress and hair, I think it would match since she is the lust
Let's go! I am saving up and will start my 3D printing journey hopefully this year, I'm from a different country and this hobby is even more expensive here.
Highly recommend Brotherhood . It follows the manga’s story after about 15 episodes in. Only flaw is that because a lot of the beginning story had been done before, they rush through it for the first 15 episodes. But it wasn’t that worst rushing I’ve ever seen. And everything after is incredible.
Thanks for the video, very nice and educational video. Great guide for beginners (like me). I'm really looking forward to new videos from you, with new cool figures. Thank you
A quick tip - when you were painting the hands, I had bad experiences in the past by contaminating the model with my skin greases. In pharmacies you can usually buy finger cots. They are usually dirt cheap and I buy them bulk. On the hand I use the brush with I use these on 1-2 fingers and only touch the model with the finger cot :) I see you tend to use the other hand with full gloves (same as me) - maybe this will be to your liking as well. I love it as you can have a nice fixed point on the model without the worry of leaving some residue. I know they are not gaming models but I often had to repair airbrushed parts before I started using the finger cots.
@@TinyLittles3D I hope it helps :D Keep up the good work! I still have yet to try the skin painting method you do :D But in recent times I have different models on order :( So I have not painted "real models" in a fair while :(
i got subscribed after the velma figure and will love to see a video where you explain a bit how to get into this hobby, where to start, what 3d printer to get and some tips for coloring. i kinda would like to start doing it too but not sure if starting from garage kit is better or maybe find a used 3d printer. And love the video btw keep it up!!
AWESOME PAINTING..... I live in the U.S. and for some reason I couldn't purchase the XTOOL.... I don't know why it just says shipping not available for selected address.
awesome content! could you please share how much resin is used to make this model? im just looking into 3d printing and curious how far 1000g of resin will take me with models around the size ur making which i assume is around 10in
If you like this scale of models, I would highly suggest going with atleast the Saturn. But to answer your question, most of the pieces would fit. I’m not sure about her dress though
great work! I have a general question though, if I already have an stl file, would I be able to get a quote on a print and paint? I checked your site and it's asking for a link
@@TinyLittles3D i preordered the elegoo saturn 4 ultra. i have considered buying a resin printer for years now but couldn't bring myself to spend the money. Since then they seem to have gotten a lot cheaper though.
Hi, I don’t sculpt, so I won’t be able to create stl files for you. Sorry. I can only 3d print files from other artist and paint them. If you’re interested, go check out my website for a quote. Link in description. Thank you
@@TinyLittles3D yes, I'm interested. What if I send you a stl file? Are you able to fix some details of the model? For example: the nose and divide the model into parts for assembly.
Amazing work!,i am looking to buy a figurine with berserk or a dark night with a big sword,i tried to search online,cant find any good store that ship to UK,if anyone can recommand me some shops,looking for premium stuff.
Lust has such an iconic, gorgeous, and beautiful look (which you captured well). She is a perfect embodiment of the femme fatale archetype, so much so that she inspired a character of my own. Of course, she's going to be better than the original, especially since, unlike Lust, she's fireproof. ;) Speaking of which, I wish we got more of her. This is going to be why I forever prefer the 2003 version of the show over Brotherhood. I was thoroughly disappointed with how she was handled in that. So, despite the quality of the show, I have VERY mixed feelings about it. Still a good model for a great character design for an equally great show.
i think u did well on the see through clothing, but i think u can do even better and should continue perfecting the see through clothes. keep doing popular anime characters and trending characters. you will grow very fast
I started this hobby a few moths ago. I mean my figures are really amateur looking and stuff but by watching your videos i get the motivation to get better and better
You can do it! I it’s been about a year now that I’m doing this and I’m still learning every time I paint
I love ca 3d’s stuff
To be fair that patreon you mentioned is super sick!
Great model and paintjob again. Love the effect on the dress!
amazing
This was fun! Great job on the tattoo! I knew that was coming up lol! The skin tone was great! I can now see u trying out a Albedo from overlord now :p
The blood effects and claws was sick! I believe u did well on the see though outfit, but i can agree with others its good to keep practicing! I can't say its bad cause i cant see colors super well but wat i see here is amazing! I can't wait for more bro!
FMA is a great anime and wat a great choice of character to start with too!
So fuckin cool
I think the only thing I would do differently would be to put verniz on her dress and hair, I think it would match since she is the lust
Just amazing, like always 🎉❤
Thank you so much 😀
Let's go! I am saving up and will start my 3D printing journey hopefully this year, I'm from a different country and this hobby is even more expensive here.
It’s an amazing hobby! The initial investment is pricey but definitely worth it if you like collecting figures
I didn't watched the brotherhood, but I do think that the other one is SO GOOD
Go watch brotherhood! It’s much better!
Highly recommend Brotherhood . It follows the manga’s story after about 15 episodes in. Only flaw is that because a lot of the beginning story had been done before, they rush through it for the first 15 episodes. But it wasn’t that worst rushing I’ve ever seen. And everything after is incredible.
Thanks for the video, very nice and educational video. Great guide for beginners (like me). I'm really looking forward to new videos from you, with new cool figures. Thank you
Just found your channel an hour ago I have been binge watching and even checking your site for a commission for lust I’m flabbergasted
A quick tip - when you were painting the hands, I had bad experiences in the past by contaminating the model with my skin greases. In pharmacies you can usually buy finger cots. They are usually dirt cheap and I buy them bulk. On the hand I use the brush with I use these on 1-2 fingers and only touch the model with the finger cot :) I see you tend to use the other hand with full gloves (same as me) - maybe this will be to your liking as well. I love it as you can have a nice fixed point on the model without the worry of leaving some residue. I know they are not gaming models but I often had to repair airbrushed parts before I started using the finger cots.
Thanks for the tip!
@@TinyLittles3D I hope it helps :D Keep up the good work! I still have yet to try the skin painting method you do :D But in recent times I have different models on order :( So I have not painted "real models" in a fair while :(
Amazing work like always ❤❤
Thanks 😄
Love it!!!
Another great piece, dude!
Beautiful work.
yes
Sooo good jobbbb!! whould love to see any ahri here tbh from League Of Leagends, amazing job!!!
i got subscribed after the velma figure and will love to see a video where you explain a bit how to get into this hobby, where to start, what 3d printer to get and some tips for coloring. i kinda would like to start doing it too but not sure if starting from garage kit is better or maybe find a used 3d printer. And love the video btw keep it up!!
Fantastic video
Wonderful paint job.
Great work!
AWESOME PAINTING.....
I live in the U.S. and for some reason I couldn't purchase the XTOOL.... I don't know why it just says shipping not available for selected address.
That’s weird, want me to try and ask xTool for you?
awesome content! could you please share how much resin is used to make this model? im just looking into 3d printing and curious how far 1000g of resin will take me with models around the size ur making which i assume is around 10in
Amazing work! What printer model did you use?
It’s printed on the uniformation gktwo
Here is an idea, try to do the skin stone for the whole dress then then spray it with a black wash.
Now I need to SEE this
That would help with the “see through” look
ooo interesting :0
dosnt work, looks reallly dirty
Incredible figure, could I know approximately how much resin you used?
I don’t really track how much I use. But my best estimate would probably be around 300g? I print most of my models hollow whenever I can.
Excellent work, I’m inspired. Do you know if the pieces at this scale fit in a elegoo mars 4 ultra?
If you like this scale of models, I would highly suggest going with atleast the Saturn.
But to answer your question, most of the pieces would fit. I’m not sure about her dress though
@@TinyLittles3D thank you
do a tatsumaki
What type of colors bro using for brush it looks pretty clean
great work! I have a general question though, if I already have an stl file, would I be able to get a quote on a print and paint? I checked your site and it's asking for a link
Yes, you can still request a quote without providing a link. Just fill in as much detail as you can and I will contact you.
Yoooo!
that mixer u used look very practical!!!! where can i get one?
I got mine off Temu. But you can search for vortex mixers on amazon
Next please do EVE from Stellar Blade
That was a,a zing effect on the dress
Wooow... you made me buy a 3D printer. What am i doing.
Awesome! Which one did you go for?
@@TinyLittles3D i preordered the elegoo saturn 4 ultra. i have considered buying a resin printer for years now but couldn't bring myself to spend the money. Since then they seem to have gotten a lot cheaper though.
@@poizonix8765 nice, I heard great things about the saturn 4 ultra. Happy printing!
Do you sell these characters ready-made?
Do you mean if I sell the figure itself? If so, yes I do. Go to my website and request a quote. I’ll be happy to answer you. Link in description
How in the world do you make a video per week. Even painting minis take me weeks to do lol. Great job
how do you get your pieces to fit without gaps so well without any type of filling
my pieces hardly ever fit right off the printer....
What's the song at the end? @TinyLittles3D can you put the names of the songs you use in your description, please?
Torii Wolf - Lantern Room
What did you use for the skin tone?
Hi TinyLitt!, Are the airbrush paint permanent ??
If you spray a coat of varnish over it. It should be
@@TinyLittles3D
When you say spray a coat of varnish are you implying this Vallejo Model Color 60 ml Matt Liquid Varnish ???.
Thanks
@@robotboy3525 yes, exactly
Hi! I wonder how much you take for a commission? From create a whole new stl file and finishing painting.
Hi, I don’t sculpt, so I won’t be able to create stl files for you. Sorry. I can only 3d print files from other artist and paint them. If you’re interested, go check out my website for a quote. Link in description. Thank you
@@TinyLittles3D yes, I'm interested. What if I send you a stl file? Are you able to fix some details of the model? For example: the nose and divide the model into parts for assembly.
So whats the verdict on the UV resin? Which would you prefer and why.
I think the UV resin has some really good potential. This model’s eyes were pretty small so I have to try it again next time
Is the size of printer control the size of the figure or no
Not really
what resin did you use to print this model?
Sunlu standard resin
I put an inquire in and did not receive a reply highly interested in several models that you have produced
Hey there, I have been getting quite a bit of requests lately but don't worry, I will answer you for sure. Thank you for your patience
is the link in the description? i dont see it.
Which link do you need? Let me see if I can help
@@TinyLittles3D CA3Dstudios i found it. im blind
Amazing work!,i am looking to buy a figurine with berserk or a dark night with a big sword,i tried to search online,cant find any good store that ship to UK,if anyone can recommand me some shops,looking for premium stuff.
hi, I might be able to help you. Send me a quote request from my website tinylittles3d.com
the eyes are WAY to distant each other, looks like a toad
however its a real piece of art
teach me 🥺
lazer is nice but im not youtube rich. maybe one day
Una de fubuki
Lust has such an iconic, gorgeous, and beautiful look (which you captured well). She is a perfect embodiment of the femme fatale archetype, so much so that she inspired a character of my own. Of course, she's going to be better than the original, especially since, unlike Lust, she's fireproof. ;)
Speaking of which, I wish we got more of her. This is going to be why I forever prefer the 2003 version of the show over Brotherhood. I was thoroughly disappointed with how she was handled in that. So, despite the quality of the show, I have VERY mixed feelings about it.
Still a good model for a great character design for an equally great show.
i think u did well on the see through clothing, but i think u can do even better and should continue perfecting the see through clothes. keep doing popular anime characters and trending characters. you will grow very fast
Hi, where can I download the files? 🥹
check out CA3D patreon's page
Esa lust parece sacada de un doujinshi
Great work!