SJ RG-01 Goggles Teardown | Can we fix the screen?
ฝัง
- เผยแพร่เมื่อ 7 ก.ย. 2024
- See the original review at: • SJ RG01 Goggles Review...
You can get a set right now: bit.ly/SJ-RG01
The EV100 Battery is ideal for charging: bit.ly/EV100Bat...
See the details of the EV100 and EV800D: • Eachine EV100 vs EV800...
Check out my current giveaway: geni.us/DroneRa...
The SJ RG01 Goggles have so much potential. They are a great size. I think with the Fresnel lens (especially since I’ve now seen that they are replaceable) they will work for a lot of people without glasses. But the screen resolution is just so low that everything looks bad and block. They say they are 920x240. It looks to me like they have repurposed old cell phone screens that didn’t get used. With that in mind I did a complete teardown of these with the hopes that maybe someone has an idea where to get replacement lens that we can try in them.
Supporting Droneracer101 on Patreon means more reviews and giveaways for you: www.patreon.com/droneracer101
**************************************************
See my current list a favorite drones and accessories here: geni.us/DR101Fa...
These are some of my favorite components right now:
**** Tiny Whoop ****
• Eachine E010S
Banggood: Eachine E010S: bit.ly/E010S
Gearbest: Furibee F36S:bit.ly/FuriBeeF36S (Try Code RC18OFF)
Extra 45C E010 Batteries: bit.ly/1S45C240mAh
**** Brushless Micro Drone ****
Lizard95: bit.ly/EachineL... • Eachine Lizard95 Revie...
Leader 120: bit.ly/Leader12... (Try Code RC18OFF)
• Leader 120
**** 5 Inch Racing Drone ****
• Diatone GT200 2017
Diatone GT2 2017 True X: bit.ly/DiatoneG...
Diatone GT2 2017 Stretch X: bit.ly/DiatoneG...
**** Radio Transmitter ****
Beginner Flysky Good Radio: bit.ly/FlyskyFSi6X
Best Beginner Option - FrSky GREAT Radio
Banggood: bit.ly/TaranisX7
Gearbest: bit.ly/TaranisQ...
Top of the Line FrSky: bit.ly/TaranisX...
**** Goggles ****
Entry Level Budget Goggles: bit.ly/VR007
Eachine Upgrade Goggles with DVR and Diversity: geni.us/EV800D (These are the best option)
Aomway Commander Goggles with DVR, Diversity and Headtracker:
Banggood: bit.ly/AomwayCo...
Gearbest: bit.ly/AomwayCo... (Try Code RC18OFF)
Just want to support the channel at no cost to you? You can (and you can find some deals) with these links:
Banggood: bit.ly/DR101-Ba...
Gearbest: bit.ly/DR101-Ge...
Amazon: bit.ly/DR101-Am...
**************************************************
Subscribe and be a DroneRacer! : / @simracer101
Enjoy & remember to like and subscribe!
-- Find DroneRacer101 Online! --
Facebook: / droneracer101
Twitter: / droneracer101
Instagram: / droneracer101
-- Credits --
All titles and images created by DroneRacer101
“Droneracer101 is a participant in the Amazon Services LLC Associates Program and other affiliate programs, advertising programs designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com and other sites at no addition cost to you.”
Thank you for supporting DroneRacer101 by using these links. Testing all this hardware is quite expensive.
I had a look around and I think 480x240 (2:1 ratio?) and 360x240 are the highest resolution you can get on one of these little 1.5" panels. I think our best bet is to replace the lens with something that's less powerful to reduce the FOV and pixel size. If we can get the FOV down to around 40 degrees the pixels may not look as large.
Even without removing all the inner parts I had a hard time assembling them back, so it's definitely going to be a challenge after removing them ;-)
If only they have included VGA screens, they could have produced an amazing pair of goggles. LCD prices are not that high these days and I think that customers would gladly add a couple more bucks to get a much better FPV experience.. Just my two cents.
Love your work, keep it up!
Teardown is not so bad... It's the putback that is gonna try your patience! Thanks for posting!
This is really good. I like when people are not afraid of trying. Yeah, it might not work out as expected and there might not be an easy solution to this, but I really think companies are not doing enough and we need to do something about it.
I think as before these goggles seem quite decent.they had some decent reviews.if can change as suggested great stuff.quik rant.everyone who I seen recently complain g about all ways being last commenting and not having a chance it's not just about the giveaways as some seem to only comment when it's giveaways.its about the learning.the help.the great deals he finds for us.and it's about the fun and laughs in most videos.i think most would agree with me.great video buddy.
Did any updates to this ever happen? Just got these, and then I found a few monocle lcd screens meant for telescopes with higher resolution, on aliexpress. They've even got 'shrouds' or whatever you want to call them, to eliminate light leakage
What about smaller screens? They make a bunch of different sizes of micro oled screens that are full 1080p
very cool teardown
The important number is ALT-015ESLN-J2C. This means it is a 1.5 inch HD screen.
Best 1.5" screen that fits the dimensions in your video I found is 480x240 (YBT15P00) . This was through alibaba. Comes from mainland china.
do you know about the IC compatibly ?? between them ?? i have these goggles with broken screens and just like to get them back working it would seem that YBT15P00 are listed as 480x320 but likely to be 320x240 but you have any luck on non stock screens at all ?? thanks
Dude, those screens really looks like old cellphones screens. Those with colorful screens that come before smartphones. You know what I mean? Anyway, I don't think it's going to be difficult to find replacement! Great job, BTW! 😊
Great tear down!!! Man i want new goggles and a new drone lol that was funny it said 2012 on it lol
Love your channel!! I have no idea how to fix it!! Maybe just a different pair lol
THANKS MARK!!!
I wouldn't have a clue as to what to upgrade on these.but after upgrade would not be darer therefore maybe buy better
But if stays cheap after upgrade then would be well worth it.these are good.not big not small.and certainly not expensive.
Bob the builder.not seen for ages
had a look (taobao) cant find a better res 1.5inch screen, but the same screen is used on Raspberry/Arduino modules.
Great job steady hands I should send my broken stuff to you LOL
My brother's an electrical engineer - I'll ask him where he gets parts for prototyping and look there :)
Could those be the same type of LCDs that are used in the GTeng and other FPV watches? Edit: nope, watches are 2.6" screens per listing.
Ya baby last again !!! I don't know Mark seems like a lot of work, will the board handle higher resolution screens?
I like the way you think...good luck.
Also, China uses the big-endian date order, so I'd interppret "17/09/12" as "2017, September, 12th"
Ah. That makes sense.
DroneRacer101 any updates? Ive found a few possibilities online just too scared to try lol
Would really like to know u managed to upgrade the screens
I have not found any screens that would work.
how to upgrade it in 2020?
Hi, any update about the screen upgrade for the sj rg01?
Droneracer101 hiya would this work with the EACHINE v100 googles aswell buddy
Anyone had any luck finding replacement LCDs yet?
In time? What is the partnumber exactly? Every time i pause the vid its out of focus😅
Where did u go lol I am waiting for another awesome review lol
Had some family things, I’m back and things will be getting back on track.
can u change the lens without taking everything apart ?
Great video
Very nice!
my googles is on the way
Great channel
LOL I just woke up and saw this is 6:16am here in California i’ve been trying my hardest to be the first to comment but not this time
Hello there mark
Did you get further with your project of adding different screens??? :)
Nope. We were never able to come up with anything that would work.
DroneRacer101 thats a pitty, maybe in the future, the ne Topsky Prime looks promising in the same style as the SJ
Did you measure the diagonal distance? Most screens are measured by their diagonal length rather than the actual dimensions
Seems like any screen will be about 1.5-8 inches diagonal, I might be wrong.
BUT... it looks like there might be a way to fit in a larger than strictly recommended screen. There's space at both ends of each, and even if some of the image gets cut off, betaflight can rearrange and compensate for that easily. How about a 1440x1440 screen for shits and giggles? www.alibaba.com/product-detail/HMD-VR-AR-device-display-sharp_60732962621.html?spm=a2700.7724838.2017115.127.40245a09V0ApNa
There's also a 1.5 inch 480x240, but I'm not sure that will be worthwhile, even at $5 per (and assuming it's compatible)
I might try to stuff a 4k module in some box goggles at some point www.alibaba.com/product-detail/2160x3840-Sharp-5-5-Inch-4k_60727697966.html?spm=a2700.7724838.2017115.250.40245a09V0ApNa
Really glad you're taking a peak at these, by the way, even if it turns out they used the best screens the internet can find. My next step would be 3D printing, but I neither own a pair of these goggles nor have ready access to a 3d printer nor have any meaningful experience with 3d CAD.
These goggles are out of stock on Banggood, but Geekbuying has them. Use code DRONE8 for 8% off.
Ha!
Heh. Not even close to top5. Why I need to made a coffee right now. ;)
Present ;)
Yea lol
is this possible to put a diversity module ?
What i dont understand why do they have to make 2 tiny screens at a resolution of say 720p? I mean come on the screens are an inch big, wtf these companies really need to stop being so rediculous about such a small part of the goggle.
Any updates ?
Nope, never found a good screen option. I’ve moved on.
DroneRacer101 I honestly don’t mind the low resolution. And the reception is great
Here
First.. fourth...phew.. that was really close
I think the price is
armed at beginners and they won't want to take it all apart. How are these compared to the ev100
Jordan Anderson ...I can tell you that ev100s are clear as a bell. Just small fov. I still use the ev100s for outdoors, but use my vrd2's for indoor.
Thanks
Exactly. The ev100 are the clearest goggles I’ve ever seen. But the image is really small. I would use the EV100 and be happy. I would not be happy with these as is unfortunately.
I just fail to understand why can't anyone make a good goggles . I use fatshark and i hate some of it but they are still better than others..
These goggles would be alright actually, the screen is big enough and resolution is alright and they are nice and light, only problem is the receiver is pretty rubbish. I don't understand why couldn't they just make it with "fatshark" module bay
My reception was good enough. 300 meters and longer looking good. I just couldn’t handle the image quality.
It’s the $300 minimum cost of entry that makes us have Fatshark alternatives. That just isn’t a realistic starting point for a lot of people.
if you can't afford fatshark traditionally you had to settle for box goggles, but they are big and usually uncomfortable. So people want lighter smaller goggle. And problem is fatshark is the biggest one around, so if you want to be competitive you have to undercut them
DroneRacer101 I agree. Do you remember the days when futaba and such radios used to rule the RC market with its its super high cost and limited features and then came Frsky and one review from Bruce and it redifined the market. I just wish someone could come up with such a thing in the goggle market.
3rd
I am from Croatia can I get a gift?😉
You can put perfume on a pile of crap but when your done it is still crap. How about some new reviews