How to Build A Hydroseeder For Under 400$

แชร์
ฝัง
  • เผยแพร่เมื่อ 14 ม.ค. 2025

ความคิดเห็น • 15

  • @harls9287
    @harls9287 5 หลายเดือนก่อน

    Thanks for the vid, and time it took to make it bud. Hydro seeding is expensive in Aus. I too am building one, so your tips and design have supported my back of a beer coaster design, and encouraged me by seeing yours actually work. Thanks and good job 👍

  • @rabidroco
    @rabidroco ปีที่แล้ว +1

    Could you eliminate the recirculation hoses/valve and just use the main hose pointed into the IBC to mix it up?

    • @jrsprojects786
      @jrsprojects786  ปีที่แล้ว +1

      You probably could,but the hose builds a lot of pressure

    • @Apatzingenses
      @Apatzingenses 9 หลายเดือนก่อน

      Hello men ,In which store to buy the seed and the color?

  • @RNDPressureCleaning-rw4di
    @RNDPressureCleaning-rw4di 9 วันที่ผ่านมา

    What size hose is the mixing and discharge?

    • @jrsprojects786
      @jrsprojects786  วันที่ผ่านมา

      I'm going off of memory because everything is covered in snow, but I believe its 1 inch for the recirculation. I would oversize those to 2 inches if I did it again and just throttle on the valve. Also helps prevent clogs. I haven't had any clogs but I could see it would be possible and a PITA. The discharge is 2 inch. Throttle with a 1 inch output valve.

  • @lanceweeda9393
    @lanceweeda9393 6 หลายเดือนก่อน

    Linn County huh? I live in Benton County and want to build this exact thing.

  • @shehannaadams
    @shehannaadams 7 หลายเดือนก่อน

    Do you have a video from making the trashcan one you used previously? I don't need one as big as your upgrade.

    • @jrsprojects786
      @jrsprojects786  7 หลายเดือนก่อน

      I do not. It did use the same motor, pump and agitators, The Hole was in the bottom instead of the side but everything else was the same. I used Bulk Head fitting for the pipes to go through the bottom and sides of the garbage can. The entire thing was actually build on top of an old Corn hole board. the garbage can was raised about 8 inches up on a small platform that I built and was held down by ratchet straps.

  • @taylorreese5173
    @taylorreese5173 9 หลายเดือนก่อน

    What kind of nozzle do you use? I have fabricated my own machine and the spayer and nozzle designs. The nozzles i have designed are not working and i cant find one to buy for less than like $300

    • @jrsprojects786
      @jrsprojects786  9 หลายเดือนก่อน

      I ended up just taking a plastic 1 inch quick release coupler. I heated it up a little and just re-shaped it in the vice. so its about 1/4 ich wide gap by 3/4 ish now. works pretty good. Not perfect but works. If that didn't work I was going to get a Plastic cap and just cut a slot with a grinder

  • @tmr1331
    @tmr1331 10 หลายเดือนก่อน

    How much do you charge for hydro seeding?

    • @jrsprojects786
      @jrsprojects786  10 หลายเดือนก่อน

      I've only ever done my own stuff and friends and family. Usually they pay for the seed/ mulch fertilizer and buy the beer.