Making a Dual Sealed Subwoofer - 12" Sony Xplod

แชร์
ฝัง
  • เผยแพร่เมื่อ 12 ธ.ค. 2024

ความคิดเห็น • 520

  • @chrclmnky
    @chrclmnky  6 ปีที่แล้ว +13

    For all of you asking the subwoofer test songs / tracks:
    1st - 1st song in this mix th-cam.com/video/3Tx-Vd-lVi0/w-d-xo.html
    2nd - th-cam.com/video/Udsefqice5A/w-d-xo.html

    • @striderhiryu2196
      @striderhiryu2196 5 ปีที่แล้ว

      Hi sir saan po kayo pwd macontact plan ko sana pagawa ng sub.thanks

    • @Kaberks537
      @Kaberks537 5 ปีที่แล้ว

      Oo nga boss san po pwede makontak

    • @MBBtube108
      @MBBtube108 5 ปีที่แล้ว

      Hi! Please give the name of the songs. The video link you provided, is removed.

    • @za1ren
      @za1ren ปีที่แล้ว

      @@MBBtube108 +

  • @theonecommenter
    @theonecommenter 5 ปีที่แล้ว +9

    I have 4 of them in my house I know they are for cars but I love the bass that comes from them

    • @chrclmnky
      @chrclmnky  5 ปีที่แล้ว +1

      Yes they are very good subwoofers yet affordable.

    • @Jean-Triphase
      @Jean-Triphase 5 ปีที่แล้ว +1

      Don't worry, there is not not drivers for car or for home, a driver is a driver.

  • @StaticVapour590
    @StaticVapour590 6 ปีที่แล้ว

    Yet again, awesome build. Sporting classic Xplod drivers and proper MDF. Respect !

  • @ARJUN-SS
    @ARJUN-SS 5 ปีที่แล้ว +1

    I can feel the bass❤️

  • @anthonyfejeran1891
    @anthonyfejeran1891 5 ปีที่แล้ว +3

    Nice job brother.

    • @chrclmnky
      @chrclmnky  5 ปีที่แล้ว

      Thanks Anthony

  • @l34052
    @l34052 5 ปีที่แล้ว

    I built my first sealed box last year and it turned out pretty good, nice sound and tight. I'm in the planning and design phase of a ported box I'm going to build this year, I have 2 identical subs so it'll be interesting to hear the difference.
    From the WinISD simulations it suggests a 9+db increase around 44hz so should be noticeably louder and I'm aiming for a tuning frequency of around 28hz for the deep lows.

  • @FinnishArmy
    @FinnishArmy 5 ปีที่แล้ว

    Putting down the glue was satisfying.

  • @rockylebon1153
    @rockylebon1153 ปีที่แล้ว

    Full bass demo🔥🔥💥💥❤

    • @chrclmnky
      @chrclmnky  ปีที่แล้ว

      Sorry there were none.

  • @simonivan4916
    @simonivan4916 6 ปีที่แล้ว +1

    Thank you LODI...

  • @dclegend4988
    @dclegend4988 5 ปีที่แล้ว +3

    Hi im DC and awesome creation. You must make a speaker box with two 12 inch speakers (not subwoofers)that will be awesome . thanks for making these video.s.

    • @chrclmnky
      @chrclmnky  5 ปีที่แล้ว

      Thank you for the feedback DC.

  • @Germknoedel
    @Germknoedel 6 ปีที่แล้ว +2

    Your dog is really cute :D

    • @chrclmnky
      @chrclmnky  6 ปีที่แล้ว +1

      Yes he is. 😃😄

  • @deepujoshi7007
    @deepujoshi7007 5 ปีที่แล้ว +1

    Wonderful work

    • @chrclmnky
      @chrclmnky  5 ปีที่แล้ว

      Thank you Deepu.

    • @deepujoshi7007
      @deepujoshi7007 5 ปีที่แล้ว

      Aapka contact number mil sakta hai

  • @raymondjohnson6961
    @raymondjohnson6961 6 ปีที่แล้ว

    Awesome build Sir, well done!!! You built a really great looking and great sounding box.👏👏👏🔥🔥💯🔊🔊🔊🔊💪💪💪💪

    • @chrclmnky
      @chrclmnky  6 ปีที่แล้ว

      Thank you Raymond for such heart-melting feedback. And i like those emojis for real. 😎😍😂

  • @electronicshelpcare
    @electronicshelpcare 5 ปีที่แล้ว

    Thank you Very much for the Video.

  • @donkeymaster1815
    @donkeymaster1815 6 ปีที่แล้ว

    Keep up the good work Sir
    - Proud to be Pinoy!!

    • @chrclmnky
      @chrclmnky  6 ปีที่แล้ว

      Hello Donkey, thank you for the positive feedback. Yes proud to be noypi po.

  • @dnrink44
    @dnrink44 5 ปีที่แล้ว +1

    Kudos Kudos Kudos bro... Excellent video on how to make a sealed, simple, and VERY accurate box. I make these all the time for family and friends. That way when I am a passenger in their vehicle they have good sound... Lmao... That and I'm retired and like doing it... They cover all cost for materials... and hardware...amp(s) speaker (s) ect.. And I keep all the left overs. Wiring wood Yada Yada... Anyway.... Again Kudos.

    • @chrclmnky
      @chrclmnky  5 ปีที่แล้ว

      Thank you Hitman 70. :)

  • @sandeepkaushal0512
    @sandeepkaushal0512 6 ปีที่แล้ว +1

    Mind blowing sound

    • @chrclmnky
      @chrclmnky  6 ปีที่แล้ว

      Hello Sandeep! Cheers form the Philippines!

  • @bulecopper-fz25rider7
    @bulecopper-fz25rider7 6 ปีที่แล้ว +1

    Hi iam indian big fan,,,,,👌👌👌👌👌

    • @chrclmnky
      @chrclmnky  6 ปีที่แล้ว +1

      Hello Duraisamy, thank you very much.

  • @phoenix-kenzodapathaan5568
    @phoenix-kenzodapathaan5568 4 ปีที่แล้ว +1

    Respect to your craft manship, choice of music and tattoos!!
    As a bonus after piss myself laughing, the comment section is champion and comedy gold 😆😅😂
    Oh, of course it would be rude not to, but subbed and liked, and done due to the creativity in this and content of the channel 👌

    • @chrclmnky
      @chrclmnky  4 ปีที่แล้ว

      🤘🤓😍

  • @kh4n_saab___official
    @kh4n_saab___official 6 ปีที่แล้ว

    Man salute to your talent.... i m big fan of yours
    .and i want a sound system for my car like that also...
    And dude plzz make a tower sound system.......

    • @chrclmnky
      @chrclmnky  6 ปีที่แล้ว

      Thank you S.K. Next year i'll build tower speakers.

  • @amanteapasionado6836
    @amanteapasionado6836 6 ปีที่แล้ว +1

    Sounds aight but you need a better quality amp and put a some weather stripping around the subwoofer holes to seal it better and for better sound and output. It sounds like theres some air escaping.

    • @chrclmnky
      @chrclmnky  6 ปีที่แล้ว +1

      Hello Amante, how you doin. What you are hearing is the sidings of my vintage mini-van rattling like weasel on speed.

  • @ock3lstam282
    @ock3lstam282 5 ปีที่แล้ว

    i love the sound

  • @sami_got_vibes
    @sami_got_vibes 2 ปีที่แล้ว +1

    Swear ive 2 ported subs, 1 bought from manufacturer and 1 DIY but recently made a sealed box for CT Sounds strato 10 inch and thing sounds clean AFF. Always heard this argument that sealed boxes sound more sharp where as ported ones go louder. Would take a sharper one any day for a HiFi system.

    • @chrclmnky
      @chrclmnky  2 ปีที่แล้ว

      Thanks for sharing. 😎🤘

  • @iongeneral
    @iongeneral 6 ปีที่แล้ว +1

    Although this is a sealed subwoofer enclosure, those subs aren't going to last as long as subs would in a ported one, as I'm sure you're already aware. But I have to say, this is by far the best DIY subwoofer enclosure video I've watched! The way you've designed and crafted it is amazing, and it looks really good too. Very good work, sir!
    Could I ask what song it is you demo'd with at the end?

    • @chrclmnky
      @chrclmnky  6 ปีที่แล้ว +1

      Hello NsanityHD, how you doin. Thanks for the positive feedback. The owner of this sub preferred a sealed box for his hatchback daily driver for a more accurate and clean bass.
      The test track is the first one in this mix th-cam.com/video/3Tx-Vd-lVi0/w-d-xo.html.

  • @Davindersingh-oy9zx
    @Davindersingh-oy9zx 6 ปีที่แล้ว

    appreciate ur work ... ur videos r awesome as always buddy 😀😀 keep it up

    • @chrclmnky
      @chrclmnky  6 ปีที่แล้ว

      Thank you Davinder.

  • @kizovwmk361
    @kizovwmk361 4 ปีที่แล้ว +1

    Holes one doesn't always need?
    Do I matter the size of the box ha subwoofer. Tnx

    • @chrclmnky
      @chrclmnky  4 ปีที่แล้ว

      Hello, this is a SEALED enclosure. So no hole or port.

  • @ledmk2
    @ledmk2 6 ปีที่แล้ว +1

    Nice

  • @jhonlouiesausa3630
    @jhonlouiesausa3630 6 ปีที่แล้ว

    Thanks to you sir. Nagka interest kog build. Kamolo ko build karon e link lang nku dani pag human hehe. God bless more powers

    • @chrclmnky
      @chrclmnky  6 ปีที่แล้ว

      Make good and enjoy.

  • @AnoopSara
    @AnoopSara 6 ปีที่แล้ว +2

    Which are the songs.. Especially second one?

    • @chrclmnky
      @chrclmnky  6 ปีที่แล้ว

      Hello Anoop, the bass test music? The second subwoofer bass test music is from Sandeep Luthra and here's the link th-cam.com/video/Udsefqice5A/w-d-xo.html

  • @MannspreetSingh
    @MannspreetSingh 5 ปีที่แล้ว +1

    I am lived in punjab this vedio is very nice

    • @chrclmnky
      @chrclmnky  5 ปีที่แล้ว

      Thank you Mannspreet.

  • @ozkanozkan6817
    @ozkanozkan6817 6 ปีที่แล้ว

    So high from turkey 👍👏

    • @chrclmnky
      @chrclmnky  6 ปีที่แล้ว

      Thanks Ozkan. Cheers from the Philippines.

    • @ozkanozkan6817
      @ozkanozkan6817 6 ปีที่แล้ว

      @@chrclmnky
      Cheers
      Philippines original culture have fun peace

  • @soggster292
    @soggster292 6 ปีที่แล้ว

    I feel like the only one who makes boxes outta old shoe boxes 😂😂😂

    • @chrclmnky
      @chrclmnky  6 ปีที่แล้ว

      MDF sheets are cheap, you can afford them. Why old shoe boxes, fren?

  • @MansaMarMusic
    @MansaMarMusic 5 หลายเดือนก่อน

    love your work dude quick question between sony and pioneer like 311d4 which do you prefer

    • @chrclmnky
      @chrclmnky  5 หลายเดือนก่อน

      @@MansaMarMusic 311d4 for dual sub setup

  • @rajendranv6340
    @rajendranv6340 6 ปีที่แล้ว +2

    Bass air hole ?

    • @chrclmnky
      @chrclmnky  6 ปีที่แล้ว +1

      This is SEALED. Not ported.

  • @bhaibhai-qp6fh
    @bhaibhai-qp6fh 5 ปีที่แล้ว +1

    Which is your favourite ported or sealed

    • @drummerjstone
      @drummerjstone 5 ปีที่แล้ว +1

      Sealed. Best quality sound

  • @super3nicolas
    @super3nicolas 6 ปีที่แล้ว +4

    It looks as one of them has inverted polarity, they look out of phase :)

    • @chrclmnky
      @chrclmnky  6 ปีที่แล้ว +1

      Hi thanks for the notice. I checked upon them and they have correct polarities.

    • @markascechanovicius8491
      @markascechanovicius8491 6 ปีที่แล้ว +2

      @@chrclmnky they should cancel sound of each other, if polarity was incorrect.

  • @amolaksingh4834
    @amolaksingh4834 5 ปีที่แล้ว +1

    Hey there is no space for air to eject.. it may damage the sub woofer... what to say?

    • @dnrink44
      @dnrink44 5 ปีที่แล้ว +1

      STFU!!!

    • @humanbeingfromearth
      @humanbeingfromearth 5 ปีที่แล้ว

      It's not a ported box. There are different styles of boxes friend.

    • @DonutLord32
      @DonutLord32 5 ปีที่แล้ว

      I got 2 of the exact same sub woofers. Had them for a few years and they still thump hard. They are both in enclosed boxes

    • @randomdiy6717
      @randomdiy6717 5 ปีที่แล้ว

      Hello friend.. This is a closed one and again speakers and subs do not move air they just make it vibrate at particular frequencies hence no single day they will ever push themselves out... Don't mistake this with burnt coil.

  • @snhongo1
    @snhongo1 4 ปีที่แล้ว

    Hello i need some help...which one sounds better or they are the same.....the one like that in the video with a division in between or one with just a brace in between....

    • @chrclmnky
      @chrclmnky  4 ปีที่แล้ว

      The one with a brace and opening in the middle.

  • @iTzRK_
    @iTzRK_ 6 ปีที่แล้ว +3

    Where is the air escape ?

  • @alkhorlaboratory9878
    @alkhorlaboratory9878 5 ปีที่แล้ว

    sir salamat sa mga idea mo new subie tuloy mo lng yan salute sir

    • @alkhorlaboratory9878
      @alkhorlaboratory9878 5 ปีที่แล้ว

      sir how much po yung speaker

    • @chrclmnky
      @chrclmnky  5 ปีที่แล้ว

      @@alkhorlaboratory9878 Thank you Alkhor for the positive feedback. The Sony Xplod cost 3000 each at Lazada.

  • @suljoarapovic9836
    @suljoarapovic9836 6 ปีที่แล้ว

    A gdje ti se nalazi rupa na kojoj ce izlaziti zrak 🤔

  • @GanG914
    @GanG914 6 ปีที่แล้ว

    Clean looking box but those subs needs double the power to bang like they should.

  • @JoshM7
    @JoshM7 6 ปีที่แล้ว

    It's bugging me I can find the TS parameters for this woofer... But the song at 10:30 seems to be playing pretty well to 20hz. Sounds good considering I can't find a darn thing about this sub other than the sensitivity...
    Would like to see something like a Dayton Ultimax 10 or 12 in a similar enclosure.
    You'd want at least 1.5cu for the 12 and 1cu for the 10 to stay within xmax at rms power
    Or a 6cu for the 18"... I have a 13cu ported one myself...

    • @chrclmnky
      @chrclmnky  6 ปีที่แล้ว

      Hello Josh, search for the keyword "sony xs-ns1200 owner's manual pdf" for this particular subwoofer's TS parameters and all. There also indicated manufacturer's suggested box sizes for both sealed and vented.

    • @JoshM7
      @JoshM7 6 ปีที่แล้ว

      CHRCLMNKY When I search for that Google literally pulls up nothing and sonys site also brings up nothing.
      I'm not too worried alot it as I only wanted to see how it modeled, but confused if it's just me that can't find anything on it? Earlier today I found a tiny bit of info on it, now I can't even find that.
      Thanks for taking some time to reply though.

    • @chrclmnky
      @chrclmnky  6 ปีที่แล้ว

      @@JoshM7 www.sony-latin.com/en/electronics/support/car-marine-entertainment-in-car-speakers/xs-nw1200 click the Operations Manual something about 2.5mb pdf file

  • @midorfeed2108
    @midorfeed2108 5 ปีที่แล้ว

    Hello. Good Day. We Have Same Amplifier and my only concern is since our Amplifier is Just 2000 Max Watts since in its packaging saying it 500w per Channel Max. Im glad it can run in 2 1800 Watts Sub. and how about if we add mids and kicks in the amplifier ? does it still can hold all the power of speakers can throw

    • @ARJUN-SS
      @ARJUN-SS 5 ปีที่แล้ว +1

      Help this guy

  • @ProPlayer-xc6fj
    @ProPlayer-xc6fj 5 ปีที่แล้ว

    hey, ik your getting a lot of comments, but can you tell me what you did to make the slots on the sides of your box? You used these slots to push in the fabric.

    • @chrclmnky
      @chrclmnky  5 ปีที่แล้ว

      Hello, thanks for the comment. The idea comes from Mark of Car Audio Fabrication. Watch it here th-cam.com/video/dYl1WOGtVV4/w-d-xo.html

  • @mehehefas3277
    @mehehefas3277 6 ปีที่แล้ว +1

    Why without bass reflex?

    • @chrclmnky
      @chrclmnky  6 ปีที่แล้ว

      Because SEALED.

    • @RWL2012
      @RWL2012 6 ปีที่แล้ว

      @@chrclmnky yeah but *why* did you go with sealed...?

    • @chrclmnky
      @chrclmnky  6 ปีที่แล้ว

      To save space and get accurate bass response. Ported subs only good for home theater for watching movies. Ordinary people choices of music don't go low below 40Hz unless you're one of those millenials listening to mumble rappers' music. 😂 🤣 😃

  • @JoseZerte
    @JoseZerte 6 ปีที่แล้ว

    Wow very nice work man like

    • @chrclmnky
      @chrclmnky  6 ปีที่แล้ว

      Thank you very much Jose.

  • @GaganDeep-uw3vo
    @GaganDeep-uw3vo 6 ปีที่แล้ว

    Did you phase the 2nd one at 180?
    Do they cancel each other at same phase?
    Sorry for bad english

    • @chrclmnky
      @chrclmnky  6 ปีที่แล้ว

      Hello Gagan, no I didn't phase the 2nd one. They are both at 0 degree. Why did you asked?

  • @benochoa3576
    @benochoa3576 ปีที่แล้ว

    Hey man i got the same 2 subs in a ported box but im in a extended cab gmc 1500 would a sealed box be better?

    • @chrclmnky
      @chrclmnky  ปีที่แล้ว

      Nice. A slimmer box would be better because this box was bottoming out the subs due to noobish box design.

  • @hakim9785
    @hakim9785 ปีที่แล้ว

    Bro just asking...i dont have any experience in building subwoofer box....but i can make a house....is using plywood good? Then i add sound proof in the inside...then add the black sound proof fabric on the outside?..i plan to install 1 speaker ...this speaker....and a 1800w monoblock ?....is this good set up?

    • @chrclmnky
      @chrclmnky  ปีที่แล้ว

      Hello thanks for the feedback. Yes plywood is good and lighter than MDF but I think they're a bit expensive. Good luck and enjoy box building.

    • @chrclmnky
      @chrclmnky  ปีที่แล้ว

      Also 1800w mono amp is good enough. It can shake the whole block of neighborhood.

    • @hakim9785
      @hakim9785 ปีที่แล้ว

      @@chrclmnky ohhh thanks...btw the sound proof inside ....is that really needed?

    • @chrclmnky
      @chrclmnky  ปีที่แล้ว

      @@hakim9785 sound proofing eliminates unwanted resonance. do it.

  • @santakhalifa4321
    @santakhalifa4321 6 ปีที่แล้ว

    That's a nice sub box bro am thinking of making a box for 4 sub on a Chevrolet avalanche

    • @chrclmnky
      @chrclmnky  6 ปีที่แล้ว

      Thanks for the feedback, Santa. 4 subwoofers? I think that would be an overkill. But I bet its very exciting to build. 😎

  • @KA13wala
    @KA13wala 6 ปีที่แล้ว

    Sealed enclosure nyc sound quality

    • @chrclmnky
      @chrclmnky  6 ปีที่แล้ว

      Thank you Maa.

  • @vishalmohan1995
    @vishalmohan1995 2 ปีที่แล้ว

    Do you use this in your swift? I too have a new model swift and I was inspired by your build and installed JBL stage 1220B subwoofer (dual 12 inch) and Sony Gs100 class D amp. I have adjusted the gain and bass settings at a local car audio shop and the system absolutely rocks. Previously I have used single 12 inch jbl subwoofer with class A\B amp and I loved that setup, until I started craving for more bass. The dual 12's with mono block amplifier running at 2ohm just simply shakes the car.

    • @chrclmnky
      @chrclmnky  2 ปีที่แล้ว

      good to hear your progress. yeah they rock the car up and down. if you need more bass, you can always upgrade your amps and subwoofers. maybe go beyond 3000w rms?

    • @vishalmohan1995
      @vishalmohan1995 2 ปีที่แล้ว +1

      @@chrclmnky car audio is a never ending upgrade😅

    • @vishalmohan1995
      @vishalmohan1995 2 ปีที่แล้ว

      @@chrclmnky I saw your video on suzuki swift about LED light upgrade and did the same with my swift and my swift looks super cool now. For the indicators though, I went for "144 led" bulb (Bau15s) for both front and back because I got them at a very good price and they are extremely bright compared to stock incandescent bulbs.

    • @chrclmnky
      @chrclmnky  2 ปีที่แล้ว

      @@vishalmohan1995 good job Vishal.

    • @reflexop6201
      @reflexop6201 2 ปีที่แล้ว

      @@vishalmohan1995 which one jbl or sony better?

  • @mitubarman6614
    @mitubarman6614 6 ปีที่แล้ว

    Why did you make different partition for the subs ?

    • @RWL2012
      @RWL2012 6 ปีที่แล้ว +1

      Acts as bracing. Also if one sub fails the other can still be used

  • @usamaasmat2604
    @usamaasmat2604 5 ปีที่แล้ว

    Please follow the sizes of the 2-in-1 speaker box and follow its size and design

  • @suzukiraiderr1506
    @suzukiraiderr1506 6 ปีที่แล้ว +1

    I dont understand why it is sealed, i believed it should have breather..can u explained why. Please sir

    • @chrclmnky
      @chrclmnky  6 ปีที่แล้ว

      There are many types of subwoofer boxes, there's sealed, ported, bandpass... etc.. This one is a SEALED.

    • @Randommmmm204
      @Randommmmm204 6 ปีที่แล้ว

      Because the quality of the bass is much better. But it's not as loud.

    • @chrclmnky
      @chrclmnky  6 ปีที่แล้ว

      @@Randommmmm204 yes correct. Thanks for the feedback Vlad.

  • @kumarrupesh4556
    @kumarrupesh4556 3 ปีที่แล้ว

    This is cald real bass love u bass..

  • @justins.1283
    @justins.1283 6 ปีที่แล้ว

    Vox build was really good along with the covering I probably would have added more bracing inside the box and I hope it didn't make that rattling sound for real I'm hoping it was just your microphone being over driven because if I had a box that made that rattling noise it would get scrapped and rebuilt

    • @chrclmnky
      @chrclmnky  6 ปีที่แล้ว +1

      My minivan's sidings rattled like f**k and that is what you are hearing. You see I tried to hold the sidings in hoping to eliminate the rattling.

    • @justins.1283
      @justins.1283 6 ปีที่แล้ว

      @@chrclmnky try that spray foam insulation or get some of that rubber matting they use on truck floors for transporting big paper rolls. That matting stuck on lage flat panels with super77 adhesive works wonders.

    • @chrclmnky
      @chrclmnky  6 ปีที่แล้ว +1

      Noted that. I need a load of sound deadening material to cover all rattling spaces. Need to save money for that though and after repainting job. Or I just buy new car if I get lazy.

  • @jgbsmoker
    @jgbsmoker 4 ปีที่แล้ว

    where did you get that router jig for cutting circles?

    • @chrclmnky
      @chrclmnky  4 ปีที่แล้ว

      Hello Jeremy, that jig was a DIY acrylic. Watch this video for more - th-cam.com/video/7x4f6nfGlO0/w-d-xo.html

  • @adamabiel676
    @adamabiel676 3 ปีที่แล้ว

    Una pregunta, todos los subwoofer Sony suenan mejor en cajón sellado o porteado con laberinto , porfa te fi uno de 10" sencilla y no vibra mucho y tengo un amplificador Sony de dos canales de 500 watts

    • @chrclmnky
      @chrclmnky  3 ปีที่แล้ว

      Hello Adam, Sony Xplod subs will sound good in either sealed or ported. Just proper calculations and design needed.

    • @jinoj4678
      @jinoj4678 3 ปีที่แล้ว

      @@chrclmnky pless tell me the wedth and hight sir

    • @chrclmnky
      @chrclmnky  3 ปีที่แล้ว

      @@jinoj4678 hello Jino, there is a link to the Tinkercad schematics in the video description for the dimensions.

    • @jinoj4678
      @jinoj4678 3 ปีที่แล้ว

      @@chrclmnky thank u sir

  • @satpalbawasaab8584
    @satpalbawasaab8584 5 ปีที่แล้ว +1

    22 Siraaa Bass

  • @squad4yt103
    @squad4yt103 5 ปีที่แล้ว

    Is there any chance to play with smartphone ?

  • @beatsandbass1284
    @beatsandbass1284 6 ปีที่แล้ว

    Which software did you use for designing the box?

    • @chrclmnky
      @chrclmnky  6 ปีที่แล้ว

      Hello BeatBass, kindly check the description for the Tinkercad link. And box designing is Box Port 2 for Windows for free.

  • @manilmurali4504
    @manilmurali4504 5 ปีที่แล้ว

    Which channel amp and how many wards

  • @ВежливыйГрубиян
    @ВежливыйГрубиян 6 ปีที่แล้ว +2

    fill the box with padding polyester

  • @sheebaks9038
    @sheebaks9038 6 ปีที่แล้ว

    Which type of wood you used to bulid this box

    • @chrclmnky
      @chrclmnky  6 ปีที่แล้ว +1

      Vyshnav, MDF 3/4 sheet is used.

    • @sheebaks9038
      @sheebaks9038 6 ปีที่แล้ว

      @@chrclmnky Is this material good for building new single ported box

    • @chrclmnky
      @chrclmnky  6 ปีที่แล้ว +1

      @@sheebaks9038 MDF is the most common material in building subwoofer boxes. Yes it is good.

    • @sheebaks9038
      @sheebaks9038 6 ปีที่แล้ว

      @@chrclmnky Thanks

  • @fernandosanchez2349
    @fernandosanchez2349 5 ปีที่แล้ว +1

    Nice. 😍♥️

  • @nitestrike1000
    @nitestrike1000 6 ปีที่แล้ว

    NICE! What kind of wood did you use?

    • @chrclmnky
      @chrclmnky  6 ปีที่แล้ว

      Helo, wood is MDF board. 3/4 sheet MDF composite.

    • @nitestrike1000
      @nitestrike1000 5 ปีที่แล้ว

      @@chrclmnkythank you!
      I wish i had the woodwork skills

  • @inhawaii4941
    @inhawaii4941 5 ปีที่แล้ว +2

    Why not ported so it can do better lows

    • @chrclmnky
      @chrclmnky  5 ปีที่แล้ว

      Yes ported will do justice.

  • @ThuanNguyen-un7ly
    @ThuanNguyen-un7ly 6 ปีที่แล้ว

    What kind of glue do you use? Thank you!

    • @chrclmnky
      @chrclmnky  6 ปีที่แล้ว +1

      Hello 😎Thuan the glue used is Stikwel wood glue. Kindly check my other video for that. Thank you.

  • @satyamupadhyay14
    @satyamupadhyay14 6 ปีที่แล้ว

    I am very much interested in making one for myself
    My only question is can I make a sealed box with a flattered design and keeping the volume same while expecting the same performance ? Also Is 1 cubic feet appropriate volume for sealed box per subwoofer driver
    Thank you

    • @chrclmnky
      @chrclmnky  6 ปีที่แล้ว

      Hello Satyam, you can read the your subwoofer speaker owner's manual. The manufacturer has recommended box volumes for sealed and ported. Keep in mind that you need to stick near the recommended volumes to get the most of your subwoofer.

    • @satyamupadhyay14
      @satyamupadhyay14 6 ปีที่แล้ว

      @@chrclmnky thank you very much for replying so quick I'll check the manual before starting the build. I was just asking if I could change the design of the box and keep the volume of the box same (ie 1feet³ because you have used it too) and still get a reasonably good bass performance from the sealed sub box

    • @chrclmnky
      @chrclmnky  6 ปีที่แล้ว

      @@satyamupadhyay14 yes you can change the box design you want. Also you can choose any shape you want. There is a web calculator for the box volume www.the12volt.com/caraudio/boxcalcs.asp

    • @satyamupadhyay14
      @satyamupadhyay14 6 ปีที่แล้ว

      @@chrclmnky thank you very much your help is appreciated 🙏

    • @chrclmnky
      @chrclmnky  6 ปีที่แล้ว

      @@satyamupadhyay14 Here's another web based box calculator, this is easier to use. Only access this on laptop or desktop, not viewable on mobile. www.hometheatershack.com/forums/enclosure-volume-calculator/

  • @bluegriffin2003
    @bluegriffin2003 6 ปีที่แล้ว +1

    Ayos kaau ang subs boss. Naa ba deperensya sa sound if circle o square ang speakers? Asa pud ka kapalit adtong screw and nut para sa kilid btaw sa box. Thanks and more power

    • @chrclmnky
      @chrclmnky  6 ปีที่แล้ว

      Rare ra kaayo ang square subwoofers then mahal pa jud. Circle gehapon nindot para nako. T nuts and allen bolts ge palit sa local bolts and nuts store diri sa Butuan.

  • @AJAY-st8iq
    @AJAY-st8iq 5 ปีที่แล้ว +1

    What is the price of music system

  • @rangermatt4921
    @rangermatt4921 6 ปีที่แล้ว +2

    Some people are really stupid and should not be watching this video if they can't understand that this is a sealed subwoofer box NOT a ported box or vented box which have ports and vents as the name suggests 😂 great video anyway, seem like they kick pretty hard 👌

    • @chrclmnky
      @chrclmnky  6 ปีที่แล้ว

      That is right, but you know people sometimes can be a little funny or something. Thank you for the comment. 😄😅😂

    • @rangermatt4921
      @rangermatt4921 6 ปีที่แล้ว

      @@chrclmnky you're absolutely right😂 thank you for the video!

  • @whaky8645
    @whaky8645 3 ปีที่แล้ว

    Where did ya buy those speaker connector things brah

    • @chrclmnky
      @chrclmnky  3 ปีที่แล้ว

      Available in most online marketplaces

  • @matthewstringfield8924
    @matthewstringfield8924 6 ปีที่แล้ว

    What program did you use to design the box

    • @chrclmnky
      @chrclmnky  6 ปีที่แล้ว

      Hello Matthew, I used Box Port Design 2 for Windows, it is free to download. box-port-design.software.informer.com/2.2/

  • @perkele7623
    @perkele7623 6 ปีที่แล้ว

    Had to subscribe

  • @WizzyWayy
    @WizzyWayy 4 ปีที่แล้ว

    Do you have to have an individual chamber for each sub?

    • @chrclmnky
      @chrclmnky  4 ปีที่แล้ว

      Hello William. That depends on your application. I calculated each sub in each own sealed box volume so.

    • @WizzyWayy
      @WizzyWayy 4 ปีที่แล้ว

      @@chrclmnky ok. I'm actually going to make my own box for the first time tomorrow. 3 skar audio zvx 8's under the seat of my f150 in a sealed box

    • @chrclmnky
      @chrclmnky  4 ปีที่แล้ว

      @@WizzyWayy Those are nice subs. Have fun building!

  • @duduk.0387
    @duduk.0387 6 ปีที่แล้ว

    what is the song in the car?

  • @rogaschuler6971
    @rogaschuler6971 6 ปีที่แล้ว +4

    Your Box is nice but use better Drivers

    • @chrclmnky
      @chrclmnky  6 ปีที่แล้ว

      Those are subwoofers, not woofers.

    • @chrclmnky
      @chrclmnky  6 ปีที่แล้ว

      What is wrong with Sony XS-NW1200? Would like to hear your thoughts.

    • @rogaschuler6971
      @rogaschuler6971 6 ปีที่แล้ว

      CHRCLMNKY it’s a decend driver but there are better ones out there,these are good for a budget build but not as a daily driver car audio build

    • @chrclmnky
      @chrclmnky  6 ปีที่แล้ว +2

      @@rogaschuler6971 Budget builds are daily drivers! Expensive ones are for showing off, car shows, and competitions, that is what you mean.

    • @lukasbekcic
      @lukasbekcic 6 ปีที่แล้ว

      CHRCLMNKY the Sony have low power tolerance, they say 1800 Watts for the people that don’t understand audio. The magnets they have are far to small, the materials are bad and their excursion is limited. They’re not the worst, however nice drivers are not for “showing off” it’s for anyone willing to spend a few extra dollars for good sound and actual high bass output.

  • @guitaristin6992
    @guitaristin6992 5 ปีที่แล้ว

    Sony or Poineer which pumps more deep punchy bass?

    • @chrclmnky
      @chrclmnky  5 ปีที่แล้ว

      Same. Sony and Pioneer both designed for good bass production.

    • @8daudiohollywood767
      @8daudiohollywood767 5 ปีที่แล้ว +1

      JBL is best for soft punchy bass

    • @chrclmnky
      @chrclmnky  5 ปีที่แล้ว

      @@8daudiohollywood767 yes sir

  • @petterbakken7818
    @petterbakken7818 5 ปีที่แล้ว

    how much rattle in your car? im from norway, and im getting 2 12 inch sealed subs (30L enclosure) but im afraid that they wont hit the lows. The lower limtiting frequency is 49hz. I like rap but also occasionaly techno/electro. Should I go for it? I want something thats gonna make a thunderous sound and umf! in my car.

    • @chrclmnky
      @chrclmnky  5 ปีที่แล้ว

      Hello Petter, sealed boxes produce accurate bass but not as loud as the ported boxes. On the other hand the ported boxes can produce low and heavy bass frequencies. If car space is not an issue, then I suggest to have ported subwoofer box. They are much larger than sealed box.

    • @petterbakken7818
      @petterbakken7818 5 ปีที่แล้ว

      @@chrclmnky OK thnanks, but does lower limiting frequency of 49hz mean that I wont be able to hear any bass below that Hz (frequency)?

    • @chrclmnky
      @chrclmnky  5 ปีที่แล้ว

      @@petterbakken7818 not really. Box still produces frequencies lower than the frequency it was tuned exponentially decreasing/ inversely proportional.

    • @petterbakken7818
      @petterbakken7818 5 ปีที่แล้ว

      @@chrclmnky alright, im really stuck. The system im looking at is a dual 12 inch (1000w rms each) sealed subwoofers. The brand is called helix (german car audio). Have you heard of them? the total cost of the system is a around 2500 dollars, so I really need to be certain here haha.

    • @chrclmnky
      @chrclmnky  5 ปีที่แล้ว

      @@petterbakken7818 ported or sealed, they both good. There is another kind of subwoofer box, the bandpass box.

  • @sidd9966
    @sidd9966 4 ปีที่แล้ว +1

    Apne air ke liye hole nahi kiye

  • @derickmirandavlogs
    @derickmirandavlogs 5 ปีที่แล้ว

    what is the title of the backround music ???

  •  7 หลายเดือนก่อน

    Hi, dou you have the ts / qs numbers of this woofers?

    • @chrclmnky
      @chrclmnky  7 หลายเดือนก่อน

      No sorry. But you can seach for it, Sony Xplod subwoofer specs

  • @ananta5453
    @ananta5453 5 ปีที่แล้ว

    Ported Box using these Subwoofer ??

    • @chrclmnky
      @chrclmnky  5 ปีที่แล้ว +1

      Ported or sealed boxes can be used with the subwoofer.

  • @adam_1dizon121
    @adam_1dizon121 5 ปีที่แล้ว

    you do good work bro.. so jealous of the t nuts cant find any here it would help alot with removing my subwoofer i have in a test box i built with a interchangeable port.. btw.. love the dog

    • @chrclmnky
      @chrclmnky  5 ปีที่แล้ว +1

      Thanks, Adam. :)

    • @adam_1dizon121
      @adam_1dizon121 5 ปีที่แล้ว +1

      @@chrclmnky welcome bro much love from another diyer and basshead

    • @adam_1dizon121
      @adam_1dizon121 5 ปีที่แล้ว +1

      @@chrclmnky forgot to ask what was the best subwoofer out all of them u bought? pioneer, jbl, sony?

    • @chrclmnky
      @chrclmnky  5 ปีที่แล้ว

      @@adam_1dizon121 For me, they all the same. Price range, aesthetics, hard ware quality, documentation, and sound.

    • @adam_1dizon121
      @adam_1dizon121 5 ปีที่แล้ว

      ok thanx bro was thinking of getting the jbl s2 12 inch to try out

  • @erdinchayat6033
    @erdinchayat6033 6 ปีที่แล้ว

    What is the name of the cabinet coating material

    • @chrclmnky
      @chrclmnky  6 ปีที่แล้ว

      Hello Erdinc, it is just a charcoal black carpeting material. The adhesive is a rubber contact cement. All very cheap but gives a clean finish to cabinets.

    • @erdinchayat6033
      @erdinchayat6033 6 ปีที่แล้ว

      CHRCLMNKY thank you very much for your interest 😊

  • @norbertopascual2535
    @norbertopascual2535 5 ปีที่แล้ว +1

    What software gamit pang tuning Sir?

    • @chrclmnky
      @chrclmnky  5 ปีที่แล้ว

      Box Port Design 2.2 free for Windows box-port-design.software.informer.com/2.2/

  • @علاءعبدالسلاماسماعيل-د9ف
    @علاءعبدالسلاماسماعيل-د9ف 3 ปีที่แล้ว +2

    R this subwoofer best than pioneer 312 d

  • @sumitpurit3885
    @sumitpurit3885 5 ปีที่แล้ว

    This woofers use for home or car

    • @chrclmnky
      @chrclmnky  5 ปีที่แล้ว +2

      Hello Sumit, can be used for home and car. Although boxes for home can be of different design but same tuning procedure as of cars. Thank you for your brilliant question.

  • @nandakumaarans
    @nandakumaarans 3 ปีที่แล้ว

    Hello brother, what power should be given this subwoofer bro, this subwoofer mentioned
    RMS power: 420W
    Rated power: 300W
    Which power is best for this sub woofer?

    • @nandakumaarans
      @nandakumaarans 3 ปีที่แล้ว

      So I am like always Sony brand

    • @chrclmnky
      @chrclmnky  3 ปีที่แล้ว +1

      @@nandakumaarans match it with a 1000w mono amp.

    • @nandakumaarans
      @nandakumaarans 3 ปีที่แล้ว

      @@chrclmnky you should give each subwoofer has 500W, but this occur any issues or performed perfectly bro?

    • @chrclmnky
      @chrclmnky  3 ปีที่แล้ว

      @@nandakumaarans why there be such issues?

    • @nandakumaarans
      @nandakumaarans 3 ปีที่แล้ว

      @@chrclmnky this subwoofer will handling 420W only but you should give 500W power, that's a doubt

  • @killer32620
    @killer32620 5 ปีที่แล้ว

    I had 3 of the red ones and dam that boy knocked too bad i messed up the box tho. it was louder than my 2 massive audio subs and my 15...kinda wierd how that was my loudest setup and those were in a sealed box.

    • @chrclmnky
      @chrclmnky  5 ปีที่แล้ว

      What amp did you hook them? Must be a very powerful amp.

    • @killer32620
      @killer32620 5 ปีที่แล้ว

      @@chrclmnky it was a Pioneer GM-D8601

    • @chrclmnky
      @chrclmnky  5 ปีที่แล้ว

      @@killer32620 Nice. I am about to receive a brand new D9601 too. Very expensive here in the Philippines cost about $196

    • @killer32620
      @killer32620 5 ปีที่แล้ว

      @@chrclmnky nice should be fun

  • @jattsaab7889
    @jattsaab7889 5 ปีที่แล้ว

    Veer Ketho bolday a Ke prij a a sabb da

  • @Wat72-
    @Wat72- 6 ปีที่แล้ว

    I know people are already asking why it's sealed, but no-one seems to have gotten a proper answer. Why is it sealed? What is the benefit of that? I thought in all situations a ported one is better. Is there a specific reason why this box is sealed?

    • @RWL2012
      @RWL2012 6 ปีที่แล้ว +1

      For a given driver alignment, less space taken up and faster response at the cost of lower efficiency and less impedance rise - more "accurate" bass but poor low frequency extension, more mechanical noise from the increased excursion and also more strain on the amplifier. Sealed enclosures are probably better in small cars without dedicated midbass door enclosures due to the faster response but then ultimately the true sub bass frequencies suffer...
      th-cam.com/video/45JofX2t4iA/w-d-xo.html ported ftw lol

    • @jimjones3287
      @jimjones3287 6 ปีที่แล้ว +1

      Sealed boxes require less space. They're good for small cars and save more space. The bass is also more accurate but forget about anything lower than 40HZ

    • @chrclmnky
      @chrclmnky  6 ปีที่แล้ว +1

      @@jimjones3287 Your're feedback is on point. Sealed boxes produce accurate bass response since ordinary people's music don't go lower than 40Hz, unless you're one of them millenials who listen to mumble rappers' music. 😁 😂

  • @sheebaks9038
    @sheebaks9038 5 ปีที่แล้ว

    Bro will you please reply the dimensions of ported box, i want to fix 2×JBL subwoofers. If you have link of its manufacturing or dimensions please reply the link also

    • @chrclmnky
      @chrclmnky  5 ปีที่แล้ว +1

      hello Day Dreamer, may I know what particular model of JBL so I can give out the exact volume and box size.

    • @sheebaks9038
      @sheebaks9038 5 ปีที่แล้ว

      @@chrclmnky JBL CS1400WSI watt subwoofer, please reply all its measurements

    • @chrclmnky
      @chrclmnky  5 ปีที่แล้ว +1

      @@sheebaks9038 You can have a 2.9cuft box with a measurements: 14"x30"x19" you can copy this design www.sonicelectronix.com/item_33925_Atrend-12DQV.html

    • @sheebaks9038
      @sheebaks9038 5 ปีที่แล้ว

      @@chrclmnky Thanks so much bro, should i use 0.75 inch mdf for building the box (3/4 inch)

    • @sheebaks9038
      @sheebaks9038 5 ปีที่แล้ว

      @@chrclmnky Bro how much inch air pass should i use. It is not mentioned there

  • @mangeshpatil9465
    @mangeshpatil9465 6 ปีที่แล้ว

    Nice 👌🏻👌🏻👌🏻👍🏻👍🏻

  • @salmanahmed5798
    @salmanahmed5798 4 ปีที่แล้ว

    How much amplifier do it need Is 1000 walt enough?

    • @chrclmnky
      @chrclmnky  4 ปีที่แล้ว +1

      Yes 1000 is enough.

  • @benjiederama2248
    @benjiederama2248 4 ปีที่แล้ว

    Sir where i can buy tjis sony xplod sub here in philippines

    • @chrclmnky
      @chrclmnky  4 ปีที่แล้ว

      Lazada po sir.

  • @jeremyland2542
    @jeremyland2542 5 ปีที่แล้ว

    is ported or sealed better with this subwoofer? I have the same one and I am trying to figure out what kind of box i should make for it to get the best out of it

    • @chrclmnky
      @chrclmnky  5 ปีที่แล้ว +1

      Hello Jeremy, this build was client specific and needed a sealed because he don't like the extra boom that ported boxes produce. The Sony subwoofer has an FS of 31Hz so will be best in ported boxes too.