Kawasaki KZ 1000 Dragbike Dyno Run

แชร์
ฝัง

ความคิดเห็น • 39

  • @chrismoody1342
    @chrismoody1342 5 ปีที่แล้ว +11

    Proud owner of a 75’ bone stock except four 4/1 header Z1b. Owning a modern sportbike 40 yrs later, the Ol Kaw still demands respect. Remember these things had a steel frame, steel wheels, no fuel injection, breaker point ignition and weighed a good 150 lbs more with a good pilot could run in the 11’s.

  • @marshalllsmith2095
    @marshalllsmith2095 3 ปีที่แล้ว +2

    That sound of pure power is ossum...

  • @markkraus3598
    @markkraus3598 3 ปีที่แล้ว +2

    Beautiful KZ ! That’s slick w/the tank,seat,fender.

  • @davidhall6729
    @davidhall6729 10 ปีที่แล้ว +1

    I miss my kz's. I was 14 when I got my first one 83 KZ750 and after a week took it to the track ran 12.36. Then got a 78 KZ1000 (11.70's) and a 81 GPZ1100 (11.0's) couple years later.

  • @seanodwyer1586
    @seanodwyer1586 8 ปีที่แล้ว +6

    This bike Sounds awesome

  • @MartinOmusic
    @MartinOmusic 13 ปีที่แล้ว

    Hell yes.. I need one of these for going work everyday

  • @robinson51054
    @robinson51054 11 ปีที่แล้ว +1

    I used to have a 1974 kawaski z1 900... electronic ignition full vance amd hines, 29mm smoothbore carbs with stacks. Kickstart. Struts with a flat seat, spoked wheels, custom black with ghost flames, stock bore size but with everything built that thing was extremely fast... got stolen over night a while back, i never found it... they loaded It up on a trailor because you could hear it start miles away.. worst day of my life ive been trying to find another z1 ever since

  • @MrBgyfz450
    @MrBgyfz450 13 ปีที่แล้ว

    I would have love to hear that in person

  • @jesseray8433
    @jesseray8433 7 ปีที่แล้ว +5

    What kind of numbers did it make that day?

  • @kevinlhighfill
    @kevinlhighfill ปีที่แล้ว

    sooooo dope!!!!

  • @johnnymissfire8464
    @johnnymissfire8464 7 ปีที่แล้ว

    had one just like this. nothing I miss more than that gsxr killing kz! sure miss that fucking sound at 9000 rpm! makes me want to cry like a baby whenever I see and hear a properly built one.

  • @B250R
    @B250R 14 ปีที่แล้ว

    Nice KZ1000 drag bike, do you run NOS on it?

  • @mjr4559
    @mjr4559 7 ปีที่แล้ว +5

    hows the tinnitus ?

  • @MrMurphy1025
    @MrMurphy1025 14 ปีที่แล้ว

    has the front end been raked?

  • @kendralhunt4296
    @kendralhunt4296 ปีที่แล้ว

    It's just loud like that since it's in the garage, ive heard kz's with open 4 into 1 no baffle pass by my house, didnt sound that loud to me but it had a really good sound to it.

    • @st-qd8wg
      @st-qd8wg ปีที่แล้ว

      Are you sure it was open 4 in to 1 let me pass your crib I'll definitely get your attention quick I got Original exhaust 4to1open excellent sound deep Rich loud on vintage legendary show bike 👍HONDA 💪🏆

  • @TheOldskoolrider
    @TheOldskoolrider 13 ปีที่แล้ว

    who built your motor do you have a number for them

  • @brucekirk5386
    @brucekirk5386 5 ปีที่แล้ว

    I need to get my 78Gs1000 dyno after ground up restored

  • @AmericanBiker3107
    @AmericanBiker3107 9 ปีที่แล้ว

    Love the bike, I have a 83 kz1100, minus the shaft drive being a slight problem I'd like build the engine due to it being prior abused and neglected. How hard is it to get to 160?

    • @Reduxalicious
      @Reduxalicious 9 ปีที่แล้ว

      On an 1100, I don't know but on a KZ1000 damn near Impossible unless you can give it a 6th Gear somehow, Even with a pretty high build and keeping it streetable I could only get my KZ1000 up to around 138 GPS Indicated.

  • @ermagerd101
    @ermagerd101 5 ปีที่แล้ว +2

    Nice bike. As asked 2 years ago, what was the dyno readout? It would be great if you could reply.

    • @hottotty13
      @hottotty13 ปีที่แล้ว +1

      Surprisingly it was 63hp and 50ft#torque. 😂

  • @turtlemann14
    @turtlemann14 12 ปีที่แล้ว +2

    i'd think a fuel ratio gauge would be beneficial to this bike seeing how it is cutting out

  • @st-qd8wg
    @st-qd8wg ปีที่แล้ว

    This is great engine Honda built this motor for KZ the exhaust is competing with original 4 in to 1 witch I got on my machine mine has Real sound vocals that turns heads mint show Room condition CB SS Legend machine Great Looking absolutely beautiful premuim extended factory frame in best motorcycle in World OG show Bike my 2nd same bike since early 80s just got Like New beautiful definitely crowded pleaser Honda is best super Bike ever & KZ 1000 90s GSXR 1100R 4 in to1 nothing can come close.

  • @jonschlegel9182
    @jonschlegel9182 8 ปีที่แล้ว +1

    i had a 1979 kawasaki,,, i was running 11.17 at 137 miles per hour,,,mind you this was on a formula hard ass street tire,,,, my bike was suppose to be good for about 175 horse power,, with a proper tire ,, my bike should have been close to a 9.40,, my bike was one of the rare X1R TC,, BIKES under cut 2nd and 4 th gears , 5 quart oil pan, copper gasket,, bike shifted 2000 in the red,, was indistructable and unbeatable,, could snap the tire loose in excess of 100 miles per hour,,unless i had a passenger,, then the bike would lift the front wheel,, was and still is the closest thing to a raped ape i have ever wrapped my legs around

    • @jonschlegel9182
      @jonschlegel9182 8 ปีที่แล้ว +1

      +Jon Schlegel sorry Z1R TC

    • @yamahale
      @yamahale 6 ปีที่แล้ว

      wow where did the extra 45 hp come from? "1978 Kawasaki Z1R-TC. Claimed power: 130hp @ 8,500rpm"

    • @mikekennedy5470
      @mikekennedy5470 6 ปีที่แล้ว

      Then you sould try a 2008 hyabusa

  • @spaceballs004
    @spaceballs004 14 ปีที่แล้ว

    my dads got one a these is it a 77 check out my video.
    1977 KZ1000 drag bike. thats the title of the video.
    My dads bike has run a best time of 9.86 in the 1//4 mile.
    Beutiful bike by the way

  • @brucekirk89
    @brucekirk89 11 ปีที่แล้ว

    i have 9.5.1 so how much HP does mine have

  • @sparked3113
    @sparked3113 3 ปีที่แล้ว

    and the taco reads........12k, red line at 9 :)

  • @transmissionjimmy69
    @transmissionjimmy69 13 ปีที่แล้ว

    What kind of body is that. nice 1 piece design

    • @joeclark7471
      @joeclark7471 3 ปีที่แล้ว

      That is a FRP one price body

  • @zxtenn
    @zxtenn 11 ปีที่แล้ว

    160? sounds like a lot for a Z-1 even with 1260 but i guess it's possible-- should run in the 9's then. I like that one piece seat, fake tank, etc. I had a 74 for many years, 1015 wiseco kit, 29 smooth bores, megacycle 417 cams, crank welded, head ported, etc. still nothing vs the new bikes as i had a 2005 ZX-10, that bike would walk on the old bikes, i used to like the Wiseco 'blocks' to take the place of the stock cyl. it looked cool but sleeve NG for the street, 2 much heat-- great classic

    • @hiker-trash
      @hiker-trash 5 ปีที่แล้ว

      I've had my stock 76 up to 180 plus.

    • @72troy455
      @72troy455 5 ปีที่แล้ว +1

      I've seen plenty of built old bikes that will smoke about any new bike being produced.

  • @user-nf5vj2rq2p
    @user-nf5vj2rq2p 5 ปีที่แล้ว

    ハゲオヤジ
    イィィィィ〜!て顔すな