Thank you ekpauly! Question: What year & model truck do you have? We'd like to make sure we're working on a set for your application so we don't get your hopes up. Thanks!
MarlinCrawlerMedia i have a 2nd gen, 08. I want to invest in the whole front end set up. The tie rods, the long arm suspension, and a new set of coilovers. Do you have a link to the parts you are running?
Currently the only info we have on our upcoming Rock Crawling Long Travel (RCLT) setup is at board.marlincrawler.com/RCLT. We are hopeful for a summer launch of the full RCLT HD kit, with RCLT Standard kit coming out sometime fall or winter. The HD LCA Frame Brace Kit shown in this video is available for your Tacoma at www.marlincrawler.com/axles/front-axle-armor/hd-lca-frame-brace-2005-tacoma and is 100% compatible with both RCLT Standard or RCLT HD. :) Please consider subscribing to our Newsletter to be the first to hear any and all developments with our upcoming suspension kit! www.marlincrawler.com/newsletter Thank you and have a nice rest of the week!
ATTENTION 2010-2014 FJ OWNERS - This kit doesn’t fit properly and requires modifications to make it fit. You’ll need to cut material from the rear brackets that surround the factory cam tabs. Also, the front angled piece that has the alignment tabs doesn’t fit right in the passenger side due to the way Toyota built the radiator support bracket. My FJ has pristine tabs that weren’t smashed nor were they upgraded. I’ve informed Marlin Crawler of this, so hopefully they make an adjustment to their products so it’ll fit.
Would have been nice if you would have made it fit the second gens like it does on the third gens. Wondering if I should have went with total chaos instead. We will see how the install goes this weekend.
Suppose one doesn't want to have to weld to fill in the "wiggle room" between the cam tabs, can the older version be purchased as an option for a more snug fit? if my tabs are bent I would like to have a model to bend them back to, but with the wiggle room Its hard to know if they need to be bent more.
This is awesome!! Is a 3rd Generation Toyota 4Runner kit in the works? (96-02). I'd much rather do this than traditional cam tab gussets. Looks like it could be welded on with no disassembly too?
Hey Mike I had to chime in again I watch this video, what makes the sub frame of the GEN three forerunner not be able to absorb this kind of upgrade? With all the big tires and wheels we’re putting on these vehicle’s we’re definitely overpowering our frames/sub frames, for GEN three forerunner thanks
Hello John, thank you for the comment. If you're referring to a 1st gen Tacoma, then Yes we will be offering this kit soon! Please use the "Notify when in stock" button at the following page to receive an email notification the moment they are ready to go! Also, we'll be offering an Introductory Sale Price for the first kits that get shipped out once available :) www.marlincrawler.com/axles/front-axle-armor/hd-lca-frame-brace-1995-2004-tacoma
Thank you for your comment! ETA for FJ Cruiser should be mid to late July :) Also, yes! It will either fit over the top of TC gussets or should only require minor grinding (less than 1/16") to our parts to fit. More to come soon!
Thank you for the Q! Currently, we are unaware of any skid plate interference. Worst case would be minor trimming to the skid plate. Feel free to send pictures to us for a visual check at sales at marlin crawler dot com.
Such an asset to our community! 🙌 Thanks Mike! 🤙
Awesome job! I will be ordering as soon as they are available.
Thank you ekpauly! Question: What year & model truck do you have? We'd like to make sure we're working on a set for your application so we don't get your hopes up. Thanks!
MarlinCrawlerMedia i have a 2nd gen, 08. I want to invest in the whole front end set up. The tie rods, the long arm suspension, and a new set of coilovers. Do you have a link to the parts you are running?
Currently the only info we have on our upcoming Rock Crawling Long Travel (RCLT) setup is at board.marlincrawler.com/RCLT. We are hopeful for a summer launch of the full RCLT HD kit, with RCLT Standard kit coming out sometime fall or winter. The HD LCA Frame Brace Kit shown in this video is available for your Tacoma at www.marlincrawler.com/axles/front-axle-armor/hd-lca-frame-brace-2005-tacoma and is 100% compatible with both RCLT Standard or RCLT HD. :)
Please consider subscribing to our Newsletter to be the first to hear any and all developments with our upcoming suspension kit!
www.marlincrawler.com/newsletter
Thank you and have a nice rest of the week!
Wow now that's what you call support love it good work guy's 🇬🇺
This is going to save me so many headaches.
ATTENTION 2010-2014 FJ OWNERS - This kit doesn’t fit properly and requires modifications to make it fit. You’ll need to cut material from the rear brackets that surround the factory cam tabs. Also, the front angled piece that has the alignment tabs doesn’t fit right in the passenger side due to the way Toyota built the radiator support bracket. My FJ has pristine tabs that weren’t smashed nor were they upgraded. I’ve informed Marlin Crawler of this, so hopefully they make an adjustment to their products so it’ll fit.
Any follow up by Marlin on this issue, I would like to install some to my 2014 FJ but would hate to modify it....let me know. Thanks
When can i preorder the RCLT? I’ve called and begged on the phone, I’ll sign all the paperwork you want me to.
Happiness abounds!
Me, recently gifted a Gen 3 1998 T4R SR5 R150F 4x 3.4l.
I look forward to how this can be applied to the Gen 3 T4R’s?
Are these available for the tundra yet? 2017?
definitely want to order these soon. awesome parts!
Is this something that might be available for a 1st gen Tundra?
Will this help to prevent my cams from constantly getting knocked out of alignment after off-roading trips??
Mike you are killing me . When will the hole kit be available
When will they be available for the 3rd gen 4Runner? ...Waiting so I can put these on my Prado!!!
Would have been nice if you would have made it fit the second gens like it does on the third gens. Wondering if I should have went with total chaos instead. We will see how the install goes this weekend.
Suppose one doesn't want to have to weld to fill in the "wiggle room" between the cam tabs, can the older version be purchased as an option for a more snug fit? if my tabs are bent I would like to have a model to bend them back to, but with the wiggle room Its hard to know if they need to be bent more.
Is this install the same for 5th Gen 4Runners?
Any chance you'll be making these for the Tundras?
You said they’re made to fit snug with 3rd gen tacos. I have cam and cam tab upgrade kit from KPOffroad already on. Will this fit with them?
This is awesome!! Is a 3rd Generation Toyota 4Runner kit in the works? (96-02). I'd much rather do this than traditional cam tab gussets. Looks like it could be welded on with no disassembly too?
Will this work with taco tabs?
Is there a kit for the 1987 pickup application?
Hey Mike I had to chime in again I watch this video,
what makes the sub frame of the GEN three forerunner not be able to absorb this kind of upgrade?
With all the big tires and wheels we’re putting on these vehicle’s we’re definitely overpowering our frames/sub frames, for GEN three forerunner thanks
Anything for the upper arms yet? Be sweet to add everything to my tacobox shipment next month 🤙
Can you make a video on the cameras
1st gen?
Hello John, thank you for the comment. If you're referring to a 1st gen Tacoma, then Yes we will be offering this kit soon! Please use the "Notify when in stock" button at the following page to receive an email notification the moment they are ready to go! Also, we'll be offering an Introductory Sale Price for the first kits that get shipped out once available :)
www.marlincrawler.com/axles/front-axle-armor/hd-lca-frame-brace-1995-2004-tacoma
There isnt many 1st gens left here in the North, they either bought them back or they rusted out. There is plenty of 2nd and 3rds though
So for my 2003 GX470, this also fits on the rear side where that arm is? Or are these for the fronts only?
What are those cameras you got going on there facing forward?
Thanks for the Q. These are for forward facing Rock Crawling cameras BigMike gas integrated into his factory Toyota Entune display.
@@MarlinCrawlerMedia awesome, now i need to check if there would be room to install these reinforcements on my 3rd gen 4runner with my skid plates
Eta for the FJ cruiser? Also, if I have TC cam gussets, will these fit over them?
Thank you for your comment! ETA for FJ Cruiser should be mid to late July :) Also, yes! It will either fit over the top of TC gussets or should only require minor grinding (less than 1/16") to our parts to fit. More to come soon!
Will this fit if I have a TRD Skid plate and lower control arm skid plate installed on my 3rd gen tacoma?
Thank you for the Q! Currently, we are unaware of any skid plate interference. Worst case would be minor trimming to the skid plate. Feel free to send pictures to us for a visual check at sales at marlin crawler dot com.
Nice one good support
2008 Lexus LS 460
2008 LS 460 Lexus lower control arm kit frame kit
This is REAL taco porn 👍🏻
Would these fit over the total chaos cam tab gussets? It looks like it might have an issue with that