If I want to press and obtain a diameter of 120 mm, what play should I leave in the bottom hole, knowing that the thickness of the sheet is 1.5 mm thick?thinks ♥️
At the end of the video he mentions "redraw". That is a separate kit, and you can purchase it at Rio Grande, but you need this basic kit to make the first draw.
There are a couple things to consider to avoid wrinkles and puckering when deep drawing metal. First you have to make sure you're using the correct gauge of metal. Our keep draw kits are to be used with 18 gauge. You should also ensure that you're using a good lubricant. Our jewelry tech team prefers lanolin or lard.
Thanks a lot for clarity.
Please follow up on this process and tell us more
Very informative. How we seen the complete video.
is this method possible for 0.1 mm thickness of stainless steel sheets?
Very nice. Need to save up for these.
If I want to press and obtain a diameter of 120 mm, what play should I leave in the bottom hole, knowing that the thickness of the sheet is 1.5 mm thick?thinks ♥️
un gran maestro muchas gracias 😀
You are quite welcome.
The link below to the deep draw kit at Rio Grande is not the same as the tools you demonstrate in this video. What's up? No longer available?
Thank you for the comment! Yes, here is a link: ow.ly/XA9o50GkPSS
All of the centreing time and clamp tightening concern would be simply solved with an equaliser gasket. Contact me if you want to know more.
Damn, that's one big bullet casing you're making!
Where is the video continuation? How do you get the bottom in the form of a radius?
At the end of the video he mentions "redraw". That is a separate kit, and you can purchase it at Rio Grande, but you need this basic kit to make the first draw.
Super
Thanks a lot.
Absolutely! We are glad you liked it.
@@RioGrande1944 Sir, which material should be used for making Deep Drawn Die.
WHILE DEEP DRAWING PROCESS IN WALL THICKNESS WHAT IS THE REDUCTION,MANY OPERATIONS ARE THERE WHAT REDUCTION OCCUR IN EACH OPERATION
Yeah, but is it still 18 gauge?
How to avoid wrinkles and puckering in deep drawing
There are a couple things to consider to avoid wrinkles and puckering when deep drawing metal. First you have to make sure you're using the correct gauge of metal. Our keep draw kits are to be used with 18 gauge. You should also ensure that you're using a good lubricant. Our jewelry tech team prefers lanolin or lard.
Pravooooo
Thank you!