Nice video, interesting topic! There might be some interest in describing the intermediary steps, eg. how to set up the octocoupler, what to do with the resistor and so on.
Thanks for the video. I followed along, but am only getting the decoded wind related sentences coming through. Apart from those I am getting a lot of $STALK sentences which I have no idea how to decode to be usable. Any help greatly appreciated..
Thanks you very much for this clear an interessing video. I bought a Rasberry and also a saling boat .. The second costs much more :)... Do you think I need to do a installation with optocoupler per device ( wind, dept, etc..? or could we take the seatalk information once from the raymarine tridata and make juste a single connection ? Please continue your video.. and thanks you in advance for your reply.... Best trip around the world Christophe a future sailman
Technically no. Seatalk info from all instruments flow through the ST chain. You should be able to add an instrument to the Signal K data stream. I will be performing this task if I get my boat launched in next couple of weeks and I’ll report back.
I wonder how open plotter knows how to convert from a nine bit protocol rather than the NMEA0183 eight bit format. I will have to look into this. Thanks for the demo.
It's a SeaTalk to SignalK plugin which handles the conversion. Since it's not using a UART, I suspect they are using some sort of SoftSerial interface.
Hi , thanks for the video. I am waiting my rpi and peripherals to implement openplotter etc. I can' find how to connect to a seatalk ng device so far. any idea ?
Thank you for the video. This was very helpful getting my set-up working.
Nice video, interesting topic! There might be some interest in describing the intermediary steps, eg. how to set up the octocoupler, what to do with the resistor and so on.
Thanks for the video. I followed along, but am only getting the decoded wind related sentences coming through. Apart from those I am getting a lot of $STALK sentences which I have no idea how to decode to be usable.
Any help greatly appreciated..
great video!! thank you
Thanks you very much for this clear an interessing video. I bought a Rasberry and also a saling boat .. The second costs much more :)... Do you think I need to do a installation with optocoupler per device ( wind, dept, etc..?
or could we take the seatalk information once from the raymarine tridata and make juste a single connection ?
Please continue your video.. and thanks you in advance for your reply....
Best trip around the world
Christophe a future sailman
Technically no. Seatalk info from all instruments flow through the ST chain. You should be able to add an instrument to the Signal K data stream. I will be performing this task if I get my boat launched in next couple of weeks and I’ll report back.
@@dpmtv4159 thanks for the fast reply.. enjoy your trip
I wonder how open plotter knows how to convert from a nine bit protocol rather than the NMEA0183 eight bit format. I will have to look into this. Thanks for the demo.
It's a SeaTalk to SignalK plugin which handles the conversion. Since it's not using a UART, I suspect they are using some sort of SoftSerial interface.
Hi , thanks for the video. I am waiting my rpi and peripherals to implement openplotter etc. I can' find how to connect to a seatalk ng device so far. any idea ?
Could you make a video about using a fuel gauge or trimsensor on openplotter?
we need 3-5v octocoupler module i suppose ?
Built mine but can’t get to the boat to test!!
👏🏻👏🏻👏🏻