An easy way to quickly make your model highly transparent!

Something about the G217 clear Non-yellowing resin you don't know！
If you don't know how to use varnish spray your clear resin, or you've run out of varnish spray，,then what should we do?
Here is some tips to how to make your prints completely transparent！Hope it comes in handy!
setting：www.resione.co...
Official website : linktr.ee/resione
Facebook : / resione
Instagram ：resione
Twitter：resione
#resionetips #gktwo #resin3d #3dresin #3dprint #3dprinting #impresion3d #impresora3d #3dprinted #stampa3d
#stampante3d #imprimante3d #3dprinter #resinprinter #resin3dprinter #3dmodel #3dプリンター

[@MoonSpyStudios]

Great Tip 👍

[@firSound]

I don't have the tools to try this idea. If you (the company Resione) could possibly try this, and upload a video, I'd appreciate it greatly.
To achieve the highest transparency while minimizing post-processing effort, here is the idea.
Instead of just dipping the uncured model in warm g217 resin, then curing, TRY THIS:
1. Print Model
2. Don't wash or post-cure, but do use an air compressor to blow off as much uncured resin as possible.
3. Place the model on a spinning pottery wheel.
4. Heat g217 to 60C-80C then put heated g217 resin in an airbrush.
5. While the model is spinning on the pottery wheel, coat the model using the airbrush with g217
6. Place the coated model (careful not to smudge uncured resin) in a pressure pot with a clear lid and close tightly.
7. Turn on the air compressor and raise the pressure of the pressure pot to 80PSI (This will push the clear coat tighter against the model, ensuring the highest level of detail, as well as rid any micro-bubbles that were in the surface coat.
8. Once at 80PSI cure the part through the transparent lid of the pressure pot
9. clean and post-cure like normal.
Of course, I know extreme caution must be used when airbrushing resin, proper respirator mask + ventilation etc

[@godsaid4502]

Thank you very much for the idea, but our idea when we started making this video was how to simply make the prints transparent, because usually people who are familiar with transparent prints just use a varnish spray, but some newbies may not know how to do this, so going to make the prints transparent without needing to buy any other tools was our idea at the very beginning, and even though you've got the idea more detailed to the point, you'll still need to buy a thing or two to get it done.