Thanks for the excellent video. Worked fine with my Stiga. It's very helpful that you showed how to remove the mower deck completely rather than just stretching the belt over the pulleys like some of the comments suggest. This is an easier way but it only works if the snapped belt has the decency to drop on the lawn in one piece. In the more likely event that parts of the belt are wrapped around the pulleys or the spindles, the deck has to be removed to reach all the remains.
I noticed that your version of this mower uses two four-blade rotors. Mine (model YTH 170) uses only two two-blade rotors. Do you know whether can substitute in 4-blade rotors? Thanks again!
thank you very much for your feedback it is nice to hear that this video helps you out please give a thumb up and subscribe if you like have a great day and thank you again
Good video. FYI when sliding the deck out, I set the height adjustment back up to maximum height so the deck can clear the height adjustment arms more easily.
Thanks. My Husqvarna CTH180x slipped its cutter drive belt. I was unsure of the routing of the belt around the pulleys but your video has sorted that out. Suggestion: pause just a little longer in the video so that belt routing can be seen and understood.
Hi I have a Craftsman ...looks like the exact same deck...best video I've seen for a belt change.I think I'll finally tackle that job.One question...I live in Ireland and have been quoted 55 euro for the drive belt...is that expensive
can any body tell my witch oil I have to use, I got it white or house the that we buy ,but the are no instructions . can any body help my or tell my witch oil I have to use thnx
Why all this mucking about taking the deck off ?, it's only a 5 minute job if you use a bottle jack to compress the tensioner spring, stick the base of the jack against the right hand back tyre, after jamming the lift against the underside of the pulley, with two fingers you can spin it up, pushing the pulley towards the front of the mower/tractor, plenty of room to slip the belt on or off ( you my want to take off to front guard for the idler pulley and main drive pulley from the motor to guide the belt over - if you have BIG hands!).. easy ... just done the job for the first time... Cheers all, Colin.
Here's a tip, unless you need to remove the deck you can replace the belt without having to remove the deck. And another tip, when your belt snaps and you don't know what way the new one should go then don't pull out the old belt, and use it as a guide as you pull it out from each pulley while putting the new one in the same place, do it pulley by pulley.
Thanks for the excellent video. Worked fine with my Stiga. It's very helpful that you showed how to remove the mower deck completely rather than just stretching the belt over the pulleys like some of the comments suggest. This is an easier way but it only works if the snapped belt has the decency to drop on the lawn in one piece. In the more likely event that parts of the belt are wrapped around the pulleys or the spindles, the deck has to be removed to reach all the remains.
Thank you. This was just the instructional video that I needed. Mine is a Husqvarna CTH172.
I noticed that your version of this mower uses two four-blade rotors. Mine (model YTH 170) uses only two two-blade rotors. Do you know whether can substitute in 4-blade rotors? Thanks again!
Thanks for this video it realy help me wit the repair from my husqvarna,, it was easy after see your video.
Thx for that.
👍👍
thank you very much for your feedback it is nice to hear that this video helps you out please give a thumb up and subscribe if you like have a great day and thank you again
Thanks from France. Broken belt on my Electrolux 92cm mower deck, fixing it now following this video.
C'est vrai que c'est une bonne vidéo explicative, je dois me lancer, j'ai du bruit sur le plateau donc je vais acheter la courroie
This is the same as some craftsman LT2000 with rear grass collector, very clear presentation
Thanks
Excellent video, very helpful in refitting belt on my Husqvarna CTH151. Thank you.
i saved a heap of money by doing it myself thank you so much (kia ora) hello in maori new zealand
Thanks Carl, mine's a Stiga, but picked up lots from your video. John (Wales UK)👍
Thanks for the heads up bro. The cutter deck is exactly the same as my Husqvarna CTH2542 Twin.
excellent video CArl , just what we needed to get the job done.
The video worked wonders as the belt just snapped on my ride in ct 135 same belt 😉😉😉🇮🇪 thanks pal 🇮🇪🇮🇪🇮🇪
Good video. FYI when sliding the deck out, I set the height adjustment back up to maximum height so the deck can clear the height adjustment arms more easily.
good point 👍
11.40 20 Aug 24 Great information thank you Tim
Thanks. My Husqvarna CTH180x slipped its cutter drive belt. I was unsure of the routing of the belt around the pulleys but your video has sorted that out. Suggestion: pause just a little longer in the video so that belt routing can be seen and understood.
Stigma MP 84 series. How do I remove the blades for sharpening? Thanks
Very good presentation, clear and to the point
Hi I have a Craftsman ...looks like the exact same deck...best video I've seen for a belt change.I think I'll finally tackle that job.One question...I live in Ireland and have been quoted 55 euro for the drive belt...is that expensive
i have a stiga estate 6102 hw
is the same or is it a different procedure to replace the belt thank you
Hi! Could You please explain me, how it doesn't leave uncut stripe of grass in the middle of the deck, if blades doesn't overlap? Thanks.
one blade sits further front one further back and they are a little bit behind each other
BRILLIANT, CLEAR CONCISE WIT5H EXCELLENT VIDEO FOOTAGE. THANKYOU FOR SHARING YOUR EXPERTESE!
I am looking to replace the belt from my RTH 126 Husqvarna any idea if there is a movie for that.? Happy New Year
Execellent, straight to the point, love it!
thanks, glad it helped you
What way does the belt go on the pulleys? Should the "V"s face up and down or into the pulley and out?
Any videos for the other belt on top of it
I love your videos,,it was very helpful,, thanks
Brilliant Carl 👍
How do the belt on a Craftsman diehard 50 mover deck
Ok so how do you remove belt IF ours isn't already ripped off like yours?
Hi anyvone know where to buy parts for CHP 180 2001 model?
can any body tell my witch oil I have to use, I got it white or house the that we buy ,but the are no instructions .
can any body help my or tell my witch oil I have to use thnx
Very useful.Thank you so much.Guy would charge mi 200 €,I ve got the belt for 45€.
glad to hear, thanks for your feedback 👍
Thanks a mill for your video. Very helpful - I have a Husqvarna CTH172
Thanks, very helpful!
glad it helped thanks
2:14 😂😂😂 That made me laugh! The way he said chute 😂 😂 😂
Great video good help thanks
glad it helped you thank you
Why all this mucking about taking the deck off ?, it's only a 5 minute job if you use a bottle jack to compress the tensioner spring, stick the base of the jack against the right hand back tyre, after jamming the lift against the underside of the pulley, with two fingers you can spin it up, pushing the pulley towards the front of the mower/tractor, plenty of room to slip the belt on or off ( you my want to take off to front guard for the idler pulley and main drive pulley from the motor to guide the belt over - if you have BIG hands!).. easy ... just done the job for the first time... Cheers all, Colin.
Thank you very helpful
Here's a tip, unless you need to remove the deck you can replace the belt without having to remove the deck.
And another tip, when your belt snaps and you don't know what way the new one should go then don't pull out the old belt, and use it as a guide as you pull it out from each pulley while putting the new one in the same place, do it pulley by pulley.
VERY HELPFUL THANKS
👍👍 thanks for sharing
you are very welcome I'm glad it helped
2654 belt replacement
Thanks You !!!!
Please upload video related to koi
husqvarna cth 200
Nice video However it is possible to change the belt without removing the mower deck in about five minutes.
How Eric I'm interested ?
I agree, the belt is easy to install with out removing deck
Thanks.
Cth191
Tractor
FIRST OFF
!! ITS NOT A DAMN TRACKER!!