5 Speed 220cc ATV Go Kart First Ride ~ Kawasaki Bayou 220cc
ฝัง
- เผยแพร่เมื่อ 23 ก.พ. 2020
- Today we finish up the Kawasaki 220 ATV Go Kart swap. We swap out the worn output shaft, change the oil and install a new shock. This kart is super fun and fast. Make sure to like, comment and subscribe for more content!!!
Duromax Disount Code RBG - bit.ly/3894jRJ
Check Out Our Events - rbgkarts.com/events
Download Our Roku Channel - bit.ly/30lHmaA
Parts Used On This Build -
3/8" Tie Rods - bit.ly/2sPMS94
3/8" Tie Rod Ends Right Hand - bit.ly/30PVt8e
3/8" Tie Rod Ends Left Hand - bit.ly/2vkJMuL
Carb - bit.ly/150carb
Battery - bit.ly/33Yo0ZF
Performance CDI - bit.ly/2ogzOaH
3 Wire Key Switch - bit.ly/31PpkwM
5 Wire Key Switch - bit.ly/2W9tkXH
Brake Kit - bit.ly/2JjPnWu
Rear Brake Caliper - bit.ly/2Jhnpus
Front Left Brake Caliper - bit.ly/2pcGWVP
Front Right Brake Caliper - bit.ly/31JPikU
Master Cylinder - bit.ly/2pMMXIQ
Parts & Tools used on the channel - amazon.com/shop/redbeardsgarage
Quantum Welding Table - goo.gl/V9dHPp
Everlast Welder - goo.gl/8DRgZe
DuroMax Generators, Pressure Washers, & Engines goo.gl/GfBpNp Use 20% code RBG on ALL DuroMax products
Tube Buddy Affiliate- www.Tubebuddy.com/RBG
Help support us on Patreon - patreon.com/redbeardsgarage
Want to donate without the commitment? - paypal.me/redbeardsgarage
Want to send us something?
Red Beard's Garage
P.O. Box 572
Sweetwater, TN 37874
Facebook - redbeardsgarage
Instagram - redbeardsgarage
Google+ - redbeardsgarage
Pinterest - redbeardsgarage
Twitter - redbeardsgarage
Instrumentals by Chuki Beats - / chukibeats
-------------------------------------------------------------------------------------------------------------
*********Disclaimer*********
Please do not try to re-enact or recreate anything you see in these videos. We are trained professionals. Red Beards Garage does not take any responsibility for injury's created by doing so.
#RBGKarts #RedBeardsGarage - บันเทิง
![[TH] LEV vs TLN | TE vs VIT - VALORANT Champions 2024 DAY 3](http://i.ytimg.com/vi/_AbmrWv2lO0/mqdefault.jpg)
looks really good bud this is a really great build. thanks for all the info red beards you explain things so great thanks bud
Some rear wheel spacers would look pretty cool on this kart
We are going to widen the axle on a later video. We just wanted to ride it for now
Red Beard's Garage plus some bigger tires
My son had 87 Bayou 220 years ago and it did the same thing. It does have a spring. Two of them actually. His had broken i replaced both and didn't have any issues after that. At least until he dropped and bent the intake valve. Lol. But I'm sure your daughter won't abuse this engine like he did his. They are a great little engine. Tough as nails. Love the buggy. Keep up the wonderful videos! Much Love guys.
Very clean and well thought out build Red Beard!
Great job Red beard.Its always good to get the kids involved in what you do.Now ya can all go riding.
Looks good, rear spacers and a set of 12 inch rims will really make that stand out and give it good ground clearance, and a camo paint job 👍
You really are the man brotha!! One of the most Humble TH-camrs out there. Stay faithful my man!!
Had one of those 4wheelers back in the day they run lean butt around good machine engine to a beating when tune right good motor for that cart
I like how smaller channels try they best to interact with the subricribers ✌
I'm so happy you did this. I am about to start on a project similar to this but im using a old Fourtrax 300 motor. I am going to buy a 4 seater kart from my buddy and put some old full size bucket seats.
You did a good job. I had a Honda Odyssey back when. Cooling was a known issue on them and will be on your machine once the weather warms up. Consider adding an oil cooler mounted up high to catch cool air as you ride. I love creativity!
Bayou engines are tough. I wish people would change the oil in stuff, it really is critical for long engine life!! Looks like the cart turned out well. Dang, that exhaust is LOUD. :)
Just a note we will be lowing the pivot points on this kart to keep it from lifting the suspension and widening the axles soon. Thank you for watching and supporting!
I literally laugh every time it shows the back end, it's so tiny....roflmao!
dude that thing sounds really good, nice job man.
Man that thing is awesome, I love it. Also, I was surprised when I saw your Pittsburgh fiber composite ratchet, I love mine, it's such a great ratchet!
This is a build I've been waiting to see. Good work. Looking forward to seeing the finished product. Been looking for a good auto clutch shifter cart build, so i could get some ideas for a cart for my teenagers, and this nailed it. I was thinking about using a honda ATC rear end because of how reliable honda is and the pull starter backup. Really interested to see how the widened axles play out.
This is what I need to drive around the ski area for summer snowmaking maintenance
Put tracks on the back and I'll run it during the winter too
Lovin the content as always
GREASE THOSE SPLINES ON THE SHAFT
Really nice looking kart. Thanks.
You and Rather B Welding were my inspiration
Great build
Nice looks like a lot of fun
Everytime you ran over the water hose on the side of your house I had flashbacks of my father yelling at me for doing the same thing 😁
I remember pulling a branch with the lawm mower. Caught the water hose and broke the PVC water line. Drained the well by the time dad got home lol
Lol I thought about that when editing the video
Ive caught my water hose 3 times now on my racing kart. Ive gotten pretty fast at changing that 90 down in the ground
Alex Wasko lol
Best sounding bayou engine I have ever heard! Nice kart!!!
that was awesome!
looks like it skipped leg day lol
Chicken hawk lmao
Yeah it will get widened out soon
@@RedBeardsGarage Im currently building a I believe its called a manco go kart for my best friends son...rebuilding a 6.5 Briggs ohv for it...custom porting n other race secretive stuff lol
Haha,yah,yah!!!Lol...02/27th 2020 I just bought a massimo supersize mb200 last night for my 12yr old son (and me). I've researched it for 4 hours and everywhere I looked this cool bike showed up with almost 5 star rating and got it from a seller with 100% approval rating. I'm hoping it's not banged up or anything lol..this is my first bike since I had a kdx80 at 13yrs old so it's been a while.Whats the first steps when I receive this beast?Like regular or premium,what's the best oil best chain,best everything! Because I'm on a limited income and if I mess it up that's pretty much the end of it.👍😀
Nice build Red Beard the cart holding up well, Because you & your wife are VERY HEALTHY people. Love the build, keep on keeping on my TH-cam friend....
I think you just called my wife fat lol
The balls on this guy ^
@@RedBeardsGarage Not Fat "HEALTHY" NO disrespect Bud...
@@jessehep14"YES" I've got balls But i'm not being disrespectful un like yourself....
Hello I like this buggy I have been looking for one of these frames to do some engine swap my self any way good job if it was me I would put rear wheel spacers on it take care and always look forward to your builds.
That thing looks fun, gives me an excuse to keep my DS rear end from my old ATV around.
'm a newbie to your shows. I love the content and the great camera work. I did notice one thing that gets to me. Why don't you clean the motors before working on them? It prevents more dirt from getting in and helps find broken castings and missing bolts. You have a super clean shop, far nicer than mine and I'm now a subscriber.
Just a PSA, when using sealant on small engines, and atv engines and such. Use Super Grey RTV, Yamabond, or Hondabond. These do not break down from gasoline or oils.
We will replace it when we pull the engine off at a later date for powder coat. Thanks for the heads up brother.
Red Beard's Garage anything works in a pinch! I just saw that blue stuff and figured I would explain why it broke down and was all I’ve the place on you!
Awesome channel thank you
Motor sounds good.
Sounds great
Awesome build , I have many bayou 300 bikes Awesome motors, I would love to see you do a 4x4 build
Sounds good
Can you show how you made the go kart shifter linkage been looking to do this kinda thing to mine for an atv engine as well and im glad i stumbled across your video here :)
Are you going to make a video on the latest verison of the duromax 7hp? It says 196cc on the website but the one i ordered and recieved says 208cc on the cover and its stamped 208cc on the block.
I've got a question if you can help is there a 5speed or a 6speed transmission that will bolt to a Kawasaki bayou 400 4x4 engine
That thing rips bro
Man that thing goes well.
Hey man I’ve got a Kawasaki bayou 220 do you know how hard it would be to change the shift shaft in one? My broke and is also stripped so I need to replace it. Any ideas on how to do it? Thanks
Honestly this build has really inspired me to build a sxs for my kids. Think I'm gonna pick up another bayou 300 and hack it apart and build a frame around it and send it.
Used your code thanks!
I found you on Roku!👍
hey buddy
As red beard would say,”That muffler sounds reeal niice.” Ha! Love how that thing sounds.
Could one put a cvt on this set up? If it is possible is there anyway to also keep reverse?
i like it turned out really nice and it has a nice bark i am working on a motor like it right now has a charging problem, Kawasaki they scream
i know this video is from 3yrs ago but how did you manage to change the shifter pedal?
love it
Something I would really like to see you do is make a 4x4 kart using a atv motor like this!
RBG very torquey setup. Seems too quick for Aubrey. What's up with the shop build? Maybe a video building a scissor lift table with air over hydraulic lift ram.
She can handle it. We are hoping to move in the new shop in the next month
I hurd you could buy the stage 2 kit for a 420 predator cheaper than the predator at harbor freight? Did i hear that correct? Because i cant find that deal. Help please
Different offset wheels for the wider rear will balance it out
Are you guys still going to widen the rear trac.? Out to the width of the front wheels.
Yeah just wanted to get it going quick to play on it
Brap brap 🤘🏻🐿🤘🏻
RBG - does anyone know of an output shaft that can be mounted on any motorcycle engine? Basically converting chainring to driveshaft which of course would need to be 90° towards the rear. Wasn’t sure what that eBay part you got looked like.
Did you put the O ring back off at be old one on the new one
Is that blue limo golf cart gunna be a video or wat would love to see a video and build on it would be so awesome with a built vtwin
So I have the same go cart and my right front tire is going bald fast what do you think is the problem RBG?
Friends has one like that. But there's is a 4 seater. The motor is off a Honda Goldwing Motorcycle. Cause it's powerful and it's automatic also with reverse.
Im building a hammer head gocart with a 400cc Honda TRX .
After seeing this i cant wait
a good habit to do when using RTV is let it dry about 5 minutes then install. it makes it more like a o-ring and doesn't just squish out
The oil filter should have a spring pushing the filter on the engine. When the filter gets to dirty to let oil through,it pushes the filter out of the way to let unfiltered oil through to keep lubrication.
i need some help I have the same four wheeler and the drive shaft keeps disengaging from the motor
Nice amount of space you have there? How big is your lot?
Damn i wanna get one of those. Any suggestions?
I am doing the same project where can i find a wireing harness
Man I wanna see u build that 6 seater golfcart in your yard
We are as soon as we are in the new shop. Too big for my garage at the house.
I would say your pinion angle is lifting the rear end. In a normal car you want about 3 degrees of equal but opposite angle on your rear end and transmission. You can tweak that for optimum performance and u joint life among other things.
Yeah we plan on lowing that pivot to keep it from lifting. Just wanted to ride it first
Hey red beard do you still have a go power sport code so I can support you through them.
We unfortunately do not sir
that "frist" ride looked fun +Red Beard's Garage
(once fixed, people might be confused..I pointed out a title typo for him :P )
Lol thinks for the heads up. I probably would not have realized it.
@@RedBeardsGarage np bud!
@@RedBeardsGarage thanks* XD
what happened to this build? i dont see another vid on it in the channel or am i missing it?
Just imagine if u had a 250 or even a 300 bayou engine. Lol adjusting clutch may help the shifting. I have 3 bayous currently.
You did grizzly natural fine cut?
That thing rips i want that engine on my yerf dog i just pulled off the 125 pit bike motor
What size are the wheels and tires? Nice go kart by the way 👍
I have a old dazon raider 150 single seater that I swapped a 1986 Honda Trx 200cc motor into its nice because it’s got e start and pull start and it’s got 5 gears with no clutch
Is it possible you have too much angle between the output shaft and the rear end? Possibly lower the motor to get a straighter shot. Probably why your splines wore the way they did.
The splines was wore out from the ATV. If you get it in a hard bind the CV will pop. The angle I am running is perfectly fine. No binding
Looks good man! I’m new to the karting world and wondered if you could answer a couple questions for me.
About how tall are you? And approximate weight? I got my daughter a Monster Moto Kart and Bike for her birthday and I’m looking to get a kart that for me so we can go riding together. I’m 6’2’ and weigh about 300 lbs (lol). I know I can’t fit on her kart so finding one that I can fit into and won’t have problems hauling my fat butt around would be awesome. Any information you have that could help me out would be greatly appreciated.
Thanks in advance.
RBG: 3:18
Michael Scott: that's what she said
Like amigo
That thing is sooo RAD!!!. Are you sure your kid will be able to handle that beast?
Oh yeah she will drive the tires off of it
When you dropping another video on moto max 250
All i want to see is the irs boosted predator build!!
Need to put some brand new front tires on that thing those puppies are so bald 😂
Im going to do some bigger tires all the way around on it
When is this and can I bring a Electric dirtbike
What’s the cheapest mini bike that I could get to go off-road ?
I need one of your engines!
I’m modifying my Yerf dog Spiderbox.
We have lots for sale
Red Beard's Garage I’m on your Facebook page, I will send you a message from there.. thanks
I would make the back end wider weem very narrow
Yeah we plan on it. Just wanted to play on it before working on it more.
Def need to make the rear end narrower. Not enough narrow. MORE NARROW RBG MORE NARROW!!!!!
We could just do a single wheel lol
@@RedBeardsGarage lol I can already feel the keyboard warriors raging
Im putting a kawasaki 500r engine on a kart . it ran when on the bike but when i put it on the kart no spark. Power to the coils and factory wiring harness is stock . everytging is hooked up as it should be . any ideas anyone ?
If the battery drops below 10.5 volts, the CDI WILL NOT FUNCTION, thus, no spark.
if you have a volt meter, you can do a load test with the battery in the bike. just place your leads on the respective terminals, set your meter to the appropriate range VDC and monitor the voltage as you crank. If it drops too low, recharge it, maintain it, or replace it. The easiest way is to replace it though in my experience. If you replace it and still nothing it may be the ignition box. Have you checked the plugs and fuses?
Try the tip sensor
code doesnt work....
im trying to buy the duromax 420cc 16hp electric start... no discount
Change your bar angle to prevent rear lift on throttle.
We are going to before powder coat.
RedBeards Tested 🧔👩🦰 and approved 🎯
Turned out looking good but you could have cleaned off the old grease and leaves off first back in the beginning as it seems that the old grease and leaves are still on it that all should have been cleaned to start with
It will get cleaned when the engine is off for paint. Its not hurting anything setting on there.
You should V8 , V6 4.3 or 2jz that stretched golf cart. Burn out machine!
at you going to do with the long golf cart
Can't fit it in the garage so waiting on the new shop to be done.
You need to busa swap
It
Yoo, what's up. What happen to the IRS Buggy project?