Thanks for checking out this video! I hope you enjoyed it. All in I probably spent about $750 on this project in total which is expensive, but considering it’d probably cost $2500 or more to buy a similar table it’s a pretty substantial savings.
@@Spagghet I'm working on the plan set. I had almost a full set of plans done a while ago but then my computer died and I lost everything so I had to start over
Very nice project and outcome. And thanks for sharing. As a plumbing contractor in California, I agree with the comments about using Teflon tape on gas. You don't need it, it is not necessary. But no big deal. If applied thinly as not to have access material to restrict or fall off in time and abstract the gas flow - Then you're fine.. Other than that, you showed that it can be done by individuals like me or others for 1/3 of the cost and it is well appreciated. I also think that you should make a breakdown of all materials used and a sketch of materials and steps how to measure, cut and assemble and you can charge for it. After all you made it and you deserve compensation.
Daaang that looks good!!! I'd love to see some close ups of the polish job on the concrete I've been wanting to try that myself. This is definitely gonna be how I do my new pit I hope mine turns out as well as yours did
Congratulations! You win. I just watched 4 other versions of an outdoor fire table. Yours not only looks the best but seemed built the best all the way around. Nice work. New subscriber.
Excellent! I am landscaping my backyard and getting close to building a fire table. This one looks the closest to what we are thinking of building. I will probably make the top so that it has 4 square holes out near the corners so that I can drop a table top into it for when we are having dinner out there. Thanks for the awesome tutorial!
I have seen other guys building the same thing, but none of them was adding a metal grid reinforcement. I like what you doing and how you are doing that. Best wishes my friend.
can you, please, show more details in a moment 06-30 to 07-00? I didnt get it how exactly did you installed the gas-fire system. This is the most important part.
I like the project, and your work looks good. Thee questions: 1: Is there a rust concern with using the metal framing? I was considering brazing or welding aluminum. 2: I do not see a vent in the box. It is my understanding this is required national code. I know natural gas rises vs pooling of propane. I am not commenting to be negative, just trying to learn if I missed something. 3: I ran an underground gas line to the corner of our recently installed stamped concrete patio. I plan on using a hose (similar to a grill line) to connect a fire table. We did not have furniture picked out when we installed the patio, and we were not sure if we wanted a permanent location of the fire table. The furniture can be reconfigured, and we felt it was best that the table could move locations. Yes, the hose may be a tripping hazard, but we will find a solution to minimize that risk. Do you have an idea or solution that would enable the table to be moved easily?
Hi... another question. I have build form an am in the process of silicon if the inside perimeter. Is there a reason why the tops of the malimime frame are siliconed as well? Is there a purpose for that? Thanks la for your guidance. Scott
Hi Aaron, can you please share the dimensions for each stage? Such as the base, then the main frame structure, and last the concrete top? This is an awesome build and would love to do this for my backyard. TIA
Concrete top : 52” long 28 width 36” x 12” in the middle Base 48” long 24” width and 16” High this is what i understood with the video based on my experience
Just a heads up for future projects, it’s not safe to stack the adapter on top of the valve, it can create a gap sense that’s not really meant to be like that, and Teflon tape should be not used. The flange on the connector and valve meet together and are supposed to form on each other. I work for a company that fixes gas leaks and check’s appliances and those two are the number one causes of gas leaks I find. Stacked adapters and Teflon tape. Be safe just wanted to help out for future projects for any one
Love how this turn out. Wondering if the structure would support if it was taller like patio table height. Was thinking about doing one of these and use it as a patio table during the day.
You can find the link to it on my Amazon storefront. Check out this list DIY Gas Fire Pit Table from MrFixItDIY.com www.amazon.com/shop/mrfixitdiy/list/ZEWXSU0K5R89
Question, what happens after a heavy rain, how does the water not collect in that pan? I get that you just use a leaf blower on the top while blowing off your terrace. Granted not cheap, as you honestly point out, but it seems like that thing will be there for at least 50 years or more. It is the entire focal point of your whole terrace. Such craftsmanship and excellent designwork. I like how that stone face looks with all the red brick in that area. Did you put like 1/2" feet on the base then holes in that pan?
@@MrFixItDIY I rewatched and still do not really see a pic of how that wet look stone base looks. You do show it but at least on my monitor, it is in serious shade, the top has such a wide lip, it shadows the base so much. Anyway, I am your biggest fan, still.
Concrete top : 52” long 28 width 36” x 12” in the middle Base 48” long 24” width and 16” High this is what i understood with the video based on my experience
Hey Aaron, I currently have my table built and concrete tabletop is ready to come out of the mold. Can you tell me your technique as far as how polishing goes? Grit to use from start to finish? Also, any other tips would be helpful. I'm really worried about screwing it up! Thanks 😊
The kit I bought off Amazon (link in description) went from 80 to 3000 I think. I just went all the way through. I had a little more aggregate look exposed in the final look so if you didn't want that I'd probably start with a higher grit like 160 or whatever your kit has
Damn. That is the best DIY gas pit I've ever seen. It would've been nice to include a materials list and budget, but very cool.
Thanks for checking out this video! I hope you enjoyed it. All in I probably spent about $750 on this project in total which is expensive, but considering it’d probably cost $2500 or more to buy a similar table it’s a pretty substantial savings.
Thank you for this video. We stayed at a golf resort in florida. And was sitting beside one just like what you made. Loved your video!
I may tackle that project sometime this year.
Looks awsome! What were the dimensions for the concrete top?
Do you have a list of other products needed for this project besides the few that are linked to Amazon? Like tools and concrete, and plans you had?
@@Spagghet I'm working on the plan set. I had almost a full set of plans done a while ago but then my computer died and I lost everything so I had to start over
Very nice project and outcome. And thanks for sharing. As a plumbing contractor in California, I agree with the comments about using Teflon tape on gas. You don't need it, it is not necessary. But no big deal. If applied thinly as not to have access material to restrict or fall off in time and abstract the gas flow - Then you're fine.. Other than that, you showed that it can be done by individuals like me or others for 1/3 of the cost and it is well appreciated. I also think that you should make a breakdown of all materials used and a sketch of materials and steps how to measure, cut and assemble and you can charge for it. After all you made it and you deserve compensation.
Daaang that looks good!!! I'd love to see some close ups of the polish job on the concrete I've been wanting to try that myself. This is definitely gonna be how I do my new pit I hope mine turns out as well as yours did
Congratulations! You win. I just watched 4 other versions of an outdoor fire table. Yours not only looks the best but seemed built the best all the way around. Nice work. New subscriber.
Same!!!
Cleanest look.
You made it look way too easy. Great job. Looks really beautiful
Could you link the yardzen plans you mentioned in your video? Hard to follow the different cuts and sizes.
Excellent! I am landscaping my backyard and getting close to building a fire table. This one looks the closest to what we are thinking of building. I will probably make the top so that it has 4 square holes out near the corners so that I can drop a table top into it for when we are having dinner out there. Thanks for the awesome tutorial!
You're AMAZING!! It turned out beautifully!! 👏👏👏👏👏
We just finished our table last week. Thank you for posting your video, it made my job a lot easier. You were right not a cheap project, but worth it.
Great job....you had me at the Bills hat...LETS GO BUFFALO!
Thanks... I liked the use of metal studs to make the base...Looks fantastic!
This gave me so many ideas. Great video and amazing looking fire pit.
Dude right on with the video man, just what I searching for!
Brilliant - thanks from the UK
Looks great! love the stone. Also, flared fittings don't need tape.
Kyle, great tip on the flared fitting not needing tape.
Flared fittings CAN'T have tape. It can ruin the seat
nice work, i just have a question, how you handle to drain the rain water?
Does it keep you warm or just for presentation?
Very nice. I’m digging that look.
Very nice fire pit build! Best one I’ve seen! Thanks for sharing your idea!
Very nice. Just gotta try it myself now.
Fire pit coming to mi casa in a few months. Tagging this for inspiration
Excellent video and appreciated the links to the build components. Could you please provide a link to the plans?
Hi! Great tutorial! Do you have the plans for the fire pit? I was trying to download/purchase them but I couldn’t find it in your website.
I have seen other guys building the same thing, but none of them was adding a metal grid reinforcement. I like what you doing and how you are doing that. Best wishes my friend.
Excellent and beautiful.
So impressed with this. Found the fire pit pan on Amazon. It says nothing about BTUs. Do you happen to know?
Great build!!
What burner kit did you use?
Great build. Thanks for sharing.
Very nicely done.
Amazing build! I want to do one as well. one thing, does it keep you warm?
can you, please, show more details in a moment 06-30 to 07-00? I didnt get it how exactly did you installed the gas-fire system. This is the most important part.
Exactly
Right on! Great job. One question. Is it cheaper to buy a nice long gas insert compared to building yourself?
Love this. I'm going to be doing a very similar build but with lighter stone to match our backyard remodel. Awesome job
How much heat does this thing put out?
It looks amazing. Congrats.
Does the melamine form have to rest on a level table while the concrete cures? Thanks
Did you use the 24” or 30” H burner?
Very nice project, excellant results! What gauge of structural studs did you use? 18, 16, or heavier?
Beautiful fire table.
Amazing all your work.
Enjoy watching.
Looks amazing! How did you attach the top to the frame?
Fantastic looking table! Do you have any suggestions for adapting it for propane? How could you add a moveable section for the gas tank? Thank!
That’s a nice build. Very good vid of how you went about it. Thanks
I like the project, and your work looks good.
Thee questions:
1: Is there a rust concern with using the metal framing? I was considering brazing or welding aluminum.
2: I do not see a vent in the box. It is my understanding this is required national code. I know natural gas rises vs pooling of propane. I am not commenting to be negative, just trying to learn if I missed something.
3: I ran an underground gas line to the corner of our recently installed stamped concrete patio. I plan on using a hose (similar to a grill line) to connect a fire table. We did not have furniture picked out when we installed the patio, and we were not sure if we wanted a permanent location of the fire table. The furniture can be reconfigured, and we felt it was best that the table could move locations. Yes, the hose may be a tripping hazard, but we will find a solution to minimize that risk. Do you have an idea or solution that would enable the table to be moved easily?
Your definitely being negative
Beautiful! GREAT JOB!
Did you fasten the ground? Or depend on weight to keep it in place?
How did you secure it to the deck? Very nice
Beautiful
Very nice, does it give off any heat or just for looks?
What are the measurements for the whole build
Is there more video specifically on the fire box control and how it works? Wondering from an engineering perspective for DIY purposes.
Wow…. So impressed with your skills man. New subscriber!
What gauge were the steel studs? i've never used them either and would love to know how strong they need to be
I’d like to know more about the gas set up How to make my own The rest was great
Do you have link to purchase the gas box.
Looks good Aaron . quick question how much color tint did you add to motar?
Hi have you got the sizes of the table thanks
Can't find the "shopping list" in your website? :)
Hi... another question.
I have build form an am in the process of silicon if the inside perimeter. Is there a reason why the tops of the malimime frame are siliconed as well? Is there a purpose for that?
Thanks la for your guidance.
Scott
Wow that’s freaking awesome
Where do I buy the kit?
Can you share dimensions please? Unless I missed your post.
Looks great!
Hi Aaron, can you please share the dimensions for each stage? Such as the base, then the main frame structure, and last the concrete top? This is an awesome build and would love to do this for my backyard. TIA
@@uychu8173 I agree -- Dimensions would be great
Concrete top : 52” long 28 width
36” x 12” in the middle
Base 48” long 24” width and 16” High
this is what i understood with the video based on my experience
It looks so frickin' cool!!
Thanks!
Awesome building! Love it! Clever and clean
I can't find the Amazon link that you mention. Can you send it to me please.
Wow. It’s absolutely beautiful.
Thanks so much!
Dude that is dope
What fire glass did you use?
Just a heads up for future projects, it’s not safe to stack the adapter on top of the valve, it can create a gap sense that’s not really meant to be like that, and Teflon tape should be not used. The flange on the connector and valve meet together and are supposed to form on each other. I work for a company that fixes gas leaks and check’s appliances and those two are the number one causes of gas leaks I find. Stacked adapters and Teflon tape. Be safe just wanted to help out for future projects for any one
is it safe for common families？and is it convinient to exam and fix the gas tube inside the framework？
Love how this turn out. Wondering if the structure would support if it was taller like patio table height. Was thinking about doing one of these and use it as a patio table during the day.
Yes it would. The metal studs are structural
@@MrFixItDIY Ya I am thinking about getting some angle iron. Have to look into what it take to get the cement board to the angle iron.
There are also heavier gage metal studs available for a stronger assembly
You make it look so easy! I could never do this :(
Excellent !!!!!!!!
AWESOMEE!!! I LOVE IT!!!!
Where can I get the fire tray
What did you use the build the frame for the base, Do you have a link? Also did you red put ventilation at all in case of a leak?
how you build or where did you got the top part?
You can find the link to it on my Amazon storefront. Check out this list DIY Gas Fire Pit Table from MrFixItDIY.com www.amazon.com/shop/mrfixitdiy/list/ZEWXSU0K5R89
Awesome build! Never tape flare fittings by the way. The 3/8 propane hose flare fittings don't get taped. Only pipe thread.
Thanks for the tip
Sweet DIY!
Loved it bro...
Well done , well done
I can’t wait to build mine too
Awesome job! 😃👍🏻👊🏻
Thanks dude!
Well Done. Was thinking of doing a similar build. Just might do so now. Thnx
Nice work!!
Well done
Hello im french. could you tell me the name of the metallic base please ?
FANTASTIC! Look forward to seeing your plans! Once again great work and thanks for posting!
Also... what size of bag of concrete did you use? I know the video said 1 1/2 bags, but what was the size of each bag? Thanks
Looks awesome
Looks amazing🤩💪🏽
Question, what happens after a heavy rain, how does the water not collect in that pan? I get that you just use a leaf blower on the top while blowing off your terrace. Granted not cheap, as you honestly point out, but it seems like that thing will be there for at least 50 years or more. It is the entire focal point of your whole terrace. Such craftsmanship and excellent designwork. I like how that stone face looks with all the red brick in that area. Did you put like 1/2" feet on the base then holes in that pan?
There are built in drain holes and the backside of the pit which it slopes towards is slightly elevated for drainage.
Love all your vids. Wish you would have shown a good pic of the the finished product.
What do you mean? I show it plenty in the video. Also, the thumbnail image is the finished product.
@@MrFixItDIY I rewatched and still do not really see a pic of how that wet look stone base looks. You do show it but at least on my monitor, it is in serious shade, the top has such a wide lip, it shadows the base so much. Anyway, I am your biggest fan, still.
@@rockshot100 There are a bunch more images of the finished product on my instagram if you'd like to see it. @mrfixitdiy
what was your total cost?
We want to do this for something to put on our covered deck. How heavy did it end up being? Can 2 people move it ok without breaking it?
Yes. In pieces. The top comes off and weighs about 120 lbs. Base is lighter.
You made it seem so easy to do. Thank you for sharing. I wish someone would build me one. LOL.
Great job
Thanks!
Any chance you can post the measurements to this build somewhere?
Concrete top : 52” long 28 width
36” x 12” in the middle
Base 48” long 24” width and 16” High
this is what i understood with the video based on my experience
Hey Aaron, I currently have my table built and concrete tabletop is ready to come out of the mold. Can you tell me your technique as far as how polishing goes? Grit to use from start to finish? Also, any other tips would be helpful. I'm really worried about screwing it up! Thanks 😊
The kit I bought off Amazon (link in description) went from 80 to 3000 I think. I just went all the way through. I had a little more aggregate look exposed in the final look so if you didn't want that I'd probably start with a higher grit like 160 or whatever your kit has
Very cool