MPG C22M1 Mach3

This video shows how to configure a pendant on Mach3 using Modbus.
The demo uses a C22M - SERIAL MODBUS PENDANT INTERFACE CARD and an MPG4 Pendant.
C22M: www.cnc4pc.com...
MPG4: www.cnc4pc.com...
You can open a ticket if you need assistance: www.cnc4pc.com...

[@tayronendres]

Hello
Is it possible to install two handwheels on the mah3 to control two axes simultaneously?

[@PalmaAndrea]

Hi i buy some mount's ago this modbus , i follow all step ,but i have 2 questions, one i not have the profile in MCH3 with name mpg, second question is: when i select same you the braian control in my mach3 is impossible enable or disable reset, are always active, i do not why,

[@cnc4pc21]

Please open a Ticket in our website and we will give you a hand with this: www.cnc4pc.com/contact/

[@rolandjollivet38]

The count should not continue after you have released the dial. That's a guaranteed crash waiting to happen. I've got no idea if this can be amended in the setup

[@cnc4pc21]

Mach3 has a step or continuous mode. If in step mode, mach3 will ensure that every pulse that you sent is sent to the motor. It also has a setting to do the automatic switchover between the two modes depending on the speed at which you are rotation the MPG. I know this way of doing is not conventional but works if calibrated properly.

[@stockexpress8480]

not good why threre is lot of delay?

[@cnc4pc21]

It is not real time as it has serial communication to the PC, but it is really fast. This one works in real time to the motion controller: www.cnc4pc.com/c22-pendant-interface-card.html