Hi, to get X1 speed do you leave x10 and x100 high, or pull both to 0v (low), the manual is confusing it states, X10 and X100 are selectors for resolution multiplication of steps move per encoder pulse, connected both is X1 by default
Ola sou eu novamente eu estou com duvida ja fiz ela funcionar mas nao estou conseguindo trocad os eixos por ela so com os botões alt A vc poderia me dar umas dicas ???
Hello. I am using the same bob and MPG. I did what you did, all connections, config etc. Everything is working except encoder. When i open Rnr motion card plugin window, i can see the MPG A and MPG B ticks. While i am rotating encoder they are blinking but Mach 3 is not counting at Settings (Alt-6) window so i can not move my axis. Can you help me please ?
Hey! I got thanks to your video almost everything working, just the speed selection isnt doing its thing, I get input 1&2 to flash in the diagnostics site when I press the side button, but nothing happens to the speed. Which setting am I missing? Thanks for the help, cheers!
Well I have to correct myself, I can now choose between x10 and x100 after setting OEM Triggers 5,6&7 to Pin 9,10 and 11 and also putting 191-193 into the corresponding hotkeys. But if I set it to X1 nothing happens.... Any Ideas?
@@pawe1115 Please what button on keyboard you press when u get Trigger 1 --> oem code 185 ? I cant find button on my keyboard that make this value 185. Thank you for your response.
Thanks a million! Very useful indeed.
Hi, to get X1 speed do you leave x10 and x100 high, or pull both to 0v (low), the manual is confusing it states, X10 and X100 are selectors for resolution multiplication of steps move per encoder pulse, connected both is X1 by default
selam.çok teşekkür ederim..very nice work.thank you.
Like cực mạnh.
I see some others had this problem too, did you find a solution.
I already got it working but I can't change the axes, only with the alt keys. Could you give me some tips?
you can add hotkeys on the Trigger#OEM CODE
Ola sou eu novamente eu estou com duvida ja fiz ela funcionar mas nao estou conseguindo trocad os eixos por ela so com os botões alt A vc poderia me dar umas dicas ???
Hay
Hello. I am using the same bob and MPG. I did what you did, all connections, config etc. Everything is working except encoder. When i open Rnr motion card plugin window, i can see the MPG A and MPG B ticks. While i am rotating encoder they are blinking but Mach 3 is not counting at Settings (Alt-6) window so i can not move my axis. Can you help me please ?
I also had this problem, and it was solved by purchasing new BOBs
i have this same issue :(
Hey! I got thanks to your video almost everything working, just the speed selection isnt doing its thing, I get input 1&2 to flash in the diagnostics site when I press the side button, but nothing happens to the speed. Which setting am I missing? Thanks for the help, cheers!
Well I have to correct myself, I can now choose between x10 and x100 after setting OEM Triggers 5,6&7 to Pin 9,10 and 11 and also putting 191-193 into the corresponding hotkeys. But if I set it to X1 nothing happens.... Any Ideas?
In fact, there is no need to setting the OEM Triggers 5,6&7 Press the Enable button on the side and rotate the encoder to achieve speed change
@@siweixie2706 sadly not. Do you mean the encoder wheel or the x1/10/100 selector? In both cases, nothing changes for me :(
How to configer port & pin numbers in mach 3 usb
Bagaimana dengan BOB mach3 palalel port
Bom dia vc poderia me tirar uma duvida
Ola amigo bom dia
Bro xyz nob are not working why plz reply
Config-->System hotkeys
Trigger 1 --> oem code 185
Trigger 2 --> oem code 186
Trigger 3 --> oem code 187
Trigger 4 --> oem code 188
x, y, z, a, It works very well 👍
@@pawe1115 Please what button on keyboard you press when u get Trigger 1 --> oem code 185 ? I cant find button on my keyboard that make this value 185. Thank you for your response.