How to Flat Tow a Ford Bronco - Blue Ox BX8848 Tail Light Diode Wiring Kit Install (Part 3/4)
ฝัง
- เผยแพร่เมื่อ 10 ก.ย. 2024
- This is the third of a four part series on how to flat tow a 6th gen Ford Bronco. In this video I install the Blue Ox BX8848 tail light wiring kit, as well as the 6 pin tow connector. This is what enables your Bronco's tail lights to mirror what your tow vehicle's taillights are doing. Additionally, I've added a means for the Bronco's battery to be trickle charged by the tow vehicle.
If you found this video helpful or valuable, consider sending me a tip, it would be greatly appreciated!
buymeacoffee.c...
The schematic I drew up for all of this can be found here (Rev 1):
imgur.com/a/tH...
Full playlist:
• How to Flat Tow a Ford...
Part 1:
• How to Flat Tow a Ford...
Part 2:
• How to Flat Tow a Ford...
Part 4:
• How to Flat Tow a Ford...
Here's all the components I'm using to flat tow. If you wind up purchasing through these links, as an affiliate, I will receive a small commission at no extra cost to you, and it is greatly appreciated!
Blue Ox BX7380 Alpha II Tow Bar:
amzn.to/46AXeb3
Blue Ox BX2687 Basepate for Ford Bronco (Standard Bumper only):
amzn.to/3D4kHnk
Blue Ox BX8848 4 Diodes Taillight Wiring Kit:
amzn.to/3O3SlQE
Blue Ox BRK2019 Patriot 3 Brake System:
amzn.to/3O0rlkW
Blue Ox BX88206 Coiled Cable with Female Receptor:
amzn.to/43kPxCN
Disclaimer:
I'm not an expert on any of this, this is just how I personally installed my stuff, so I can't guarantee anything, and if you choose to do your own work in making your Ford Bronco flat towable, you do so at your own risk.
Thank you so much for your detail and clear explanation! I followed your wire diagram to the T! You saved me hundreds if not $2,000 in this installation. Thank you!
That's awesome, really happy that my diagram was helpful! (And apparently accurate!)
Thank you for doing these videos. This is much needed information
Thank you, I'm happy this is helpful!
I have also outfitted my 2022 Badland non-squashed 2 door to flat tow. I used the CURT wiring harnesses with built in connectors and also noticed that my turn signals look different in neutral tow. I thought I might have a problem but see that yours do the same. Thank you.
@@bryanswanson638yeah they just use the tail lights, not the yellow turn signals