If you buy a bearing seal driver kit, get the steel version not the alloy. Found the alloy ones start to burr up quickly. Plus the steel ones are great on the hydraulic press
I just remove the brake disc & use a very large Sykes Picavant 3 legged puller on the hub & if you notice , there’s a chamfered hole in the centre of the drive shaft screw part , where you pop in the drive screw point , which is exactly what they are for & it comes out with ease , as I don’t have any air tools or a compressor as a matter of fact , cheers Baz 😊
Not long done mine baz a bit of confusion with mine as euro car parts, gt and gfs all said there not sided but parts plus to the rescue both seals and new oil job done
Love that wishbone tool. Give up the vape, and get on the nicorette Quickmist, in your own words its an absolute game changer. Learn how to use it, it will take a bit of getting used to but it is brilliant. No more topping up fluid, no more charging batteries and it works instantly and you can use it anywhere....airports, on planes, no issues. When you think about it, why are you changing filters in cars, performing maintenance to prolong the life of mechanical replaceable components, when you only get one set of lungs. quickmist is a controlled medical device over the counter at any pharmacy. I stopped smoking 3 years ago, never have looked back. Sorry for preaching, and I dont work for nicorette but it sideal for someone who is looking for a better way to do things!
Ahhh I've tried to do mine today spent £25.00 on a genuine ford one didn't use a socket or anything just went full send with a rubber mallet topped the oil up and it started leaking i made sure it was as square as possible whats gone wrong baz ?
You ever drove on them, for the general public going about daily stuff they are good, you ain't going round the ring with them or setting any lap records
@@bazmeredith just on an 1997 xantia estate 2 new on back - was wet 6am round a S bend - like normal -not being silly and they aquaplaned - kept them for a month nothing improved - swapped them out for mid range and got my old car feel back.... when was in trade was tyre fitter , mech and then recovery driver - left trade in late 2000's as money was better else where.
I've got an old works van and run landsails and I'm on the Welsh roads down back lanes even tow with them on the van we sell no end of them and evergreen to the taxi lads and they love them. Personally my own experience with them and feedback I get and for the money they deliver everytime
hmm only 6 year old car allrdy in need of seal change... talking about quality in this modern age... i think as long as we stay silent and keep buying crap, the car manufacturers will push even less quality parts
If you buy a bearing seal driver kit, get the steel version not the alloy. Found the alloy ones start to burr up quickly. Plus the steel ones are great on the hydraulic press
I use lager sockets every time and like you keep meaning to buy a universal seal kit but sockets work so well.
I just remove the brake disc & use a very large Sykes Picavant 3 legged puller on the hub & if you notice , there’s a chamfered hole in the centre of the drive shaft screw part , where you pop in the drive screw point , which is exactly what they are for & it comes out with ease , as I don’t have any air tools or a compressor as a matter of fact , cheers Baz 😊
I love your videos , I’m a mechanic myself and knowing you’re doing everything right 🙌🏻good work and keep it up lad
Spot on and superb work as always, kind regards to you and take care Mark from Billericay 😀😀👍👍
Nice work Baz , mechanics in Sheffield only want to do oil and filter changes 😢
Not long done mine baz a bit of confusion with mine as euro car parts, gt and gfs all said there not sided but parts plus to the rescue both seals and new oil job done
Sometimes dealers are the way forward
For the B6 transmission Ford partno 1863642 comes with a seal and new bearing bracket,I used a 46 socket to knock it in place,great video!
If you don’t like pulling ball joints out. I can’t recommend the G hook and slide hammer . It’s a beast . But it is pricey
Do you put oil or a smear of grease on the lip? I do as I'd hate to have the seal bind for a second and be damaged?
Sometimes I do, normally on rubber ones tho
Brilliant channel
Can the vibra hammer double as a massage gun? Asking for a friend
I'll let you know 😅😂
Love that wishbone tool. Give up the vape, and get on the nicorette Quickmist, in your own words its an absolute game changer. Learn how to use it, it will take a bit of getting used to but it is brilliant. No more topping up fluid, no more charging batteries and it works instantly and you can use it anywhere....airports, on planes, no issues. When you think about it, why are you changing filters in cars, performing maintenance to prolong the life of mechanical replaceable components, when you only get one set of lungs. quickmist is a controlled medical device over the counter at any pharmacy. I stopped smoking 3 years ago, never have looked back. Sorry for preaching, and I dont work for nicorette but it sideal for someone who is looking for a better way to do things!
Noooo I appreciate this, it's actually nice to have someone say it....
@@bazmeredith no bother
Ahhh I've tried to do mine today spent £25.00 on a genuine ford one didn't use a socket or anything just went full send with a rubber mallet topped the oil up and it started leaking i made sure it was as square as possible whats gone wrong baz ?
👍
Thumbnail:
It’s a baby seal.
😂😂😂😂
Landsails? Do you not like your customers?
Back on planet earth kid
We’re is your garage.
Did you say you put a couple of Landsails on??? Omg, don't do that!
Landsails = hedge finders DAHIK
You ever drove on them, for the general public going about daily stuff they are good, you ain't going round the ring with them or setting any lap records
@@bazmeredith just on an 1997 xantia estate 2 new on back - was wet 6am round a S bend - like normal -not being silly and they aquaplaned - kept them for a month nothing improved - swapped them out for mid range and got my old car feel back.... when was in trade was tyre fitter , mech and then recovery driver - left trade in late 2000's as money was better else where.
I've got an old works van and run landsails and I'm on the Welsh roads down back lanes even tow with them on the van we sell no end of them and evergreen to the taxi lads and they love them. Personally my own experience with them and feedback I get and for the money they deliver everytime
hmm only 6 year old car allrdy in need of seal change... talking about quality in this modern age... i think as long as we stay silent and keep buying crap, the car manufacturers will push even less quality parts
In 6 years this car may of had a clutch and it may have been damaged