Ford Fusion Misfire Lacks Power | P0304, P0305, P0306
ฝัง
- เผยแพร่เมื่อ 4 ต.ค. 2024
- Hey everyone! in this video we will be figuring out why this Ford Fusion lacks power and has misfires. Follow along with the diagnostic process.
😎If this video has been helpful consider supporting us with a cup of coffee! 🙂
www.buymeacoff...
🛒PARTS LIST:
▪️ Repair video: • 2006-2012 Ford Fusion ...
🛒TOOLS NEEDED:
▪️ Scan tool: amzn.to/3OlUCWO
➡️I am part of the Amazon affiliate program and get a small commission when purchases are made through the links provided.
🔺DISCLAIMER
The information provided by Valley Mobile Automotive (“we,” “us” or “our”) on this video is for general informational purposes and entertainment only and does not replace professional advice.
All information is provided in good faith; however, we make no representation or warranty of any kind, express or implied, regarding the accuracy, adequacy, validity, reliability, availability or completeness of any information on the video.
By working on your own vehicle, you take responsibility for the outcome.
Under no circumstance shall we have any liability to you for any loss or damage of any kind incurred as a result of the use or reliance on any information provided on this channel. Your reliance on any information on the videos on this channel is solely at your own risk. - ยานยนต์และพาหนะ
Lots of help bro, keep fixing cars it's your calling!!! Helped on my 08 fusion
Thanks! Glad this was helpful 👊
thank you for going beyond to show and explain. great work
Thanks Joseph 👊
Great detail and presentation great job explaining everything
Thanks Andre 👍
Hi, I have the exact same car with the exact same symptoms right down to the popping noise. Ran great, then just didn't. Thank you so much for making this video! Curious how many miles it had. Ours has 200k, oil leaks, air conditioning leaks... Maybe it's time for a new car. Great video!
PLEASE....I NEED HELP. 2012 FORD FUSION 3.0 WITH NO COMM, NO CRANK, NO START. THE PCM RELAY IS NOT WAKING UP. IF I GIVE GROUND TO THE PCM RELAY, THE CAR PCM WAKES UP. I BELIEVE IT IS NOT RECEIVING AN IGNITION SIGNAL? ANY IDEAS? PLEASE HELP THANK YOU IN ADVANCE.
First. Hey Robert! Do you think that was all from the chain stretching? Keep up the good work.
Hey Carlos! Good question. I'll be posting a video of the repair soon. From what I found, the chain tensioner completely failed! This car was a booger to repair but it got a whole new timing kit and it's back on the road 🙂.
Hey Robert! I have a 06 Dodge Grand Caravan! I changed all sensors and done a tune up! But can’t get it to go pass 2.5 RPM I can’t press on gas to heavy it will jerk! I need help explaining what’s going on? Please and thank you