FLL Submerged Max Points
ฝัง
- เผยแพร่เมื่อ 6 ก.พ. 2025
- This is a mission compilation, not a shot-in-one-shot full board run including attachment changes. A full board run requires significantly more speed and consistency for the robot and the board members. I plan to upload such a video soon, although it will probably score around 550 points as opposed to 620 from a max points run. If I were to attempt a full run with my current robot, it would likely take about 3 minutes and score about 500 points due to consistency issues.
Feel free to ask any questions in the comment section, and I will try to answer them.
Credit to waterflame for the background music (sinking feeling)
Credit to my friend (the same friend from my last video's description) for being the cameraman.
Love your solution to the Research Vessel. Great idea!
THIS IS AMAZING!!
gg's bro!!
GREAT JOB JIMMY JOE
I LOVE UR TSHIRT IMMY JOE!!!!!!
That is awesome! Amazing work you guys! I had a similar idea for the research vessel. To make it more consistent, I recommend you should angle the vessel to 35 degrees instead of 120 degrees to the surface as shown in the video. And slowly "slide" it to the latch instead of dropping it.
@@GLEMRobotics-db6eh I am not entirely sure as to what you mean by 35 degrees to the surface, but I doubt the attachment would fit in the launch area with the boat like that. Additionally, this mission is already quite consistent, and sliding would probably just make it take longer.
@@FLLshenanigansI just rewatched the video and noticed that the vessel is latched on to the yellow latch even when it was side ways. I’m sorry I didn’t notice that at first glance. I am glad that this method works consistently. Great job👍
That way you did the research vessel is so interesting! Would never have though of putting it in like that
👏👏👏
Bonito Video! Saludos desde mi casa 😊😊😘😘💕💕
Nice job, would prefer to see an unedited 2:30 run.
I know that would be more impressive, but I only had access to the mat for about 3 weeks before my schools team( which I am coaching) needed me to bring the mat back to school for them to use it. Had I the chance, I definitely would have tried to record such a video.
nice video
May I know how you connected the impeller systems from top to bottom?
is this a team?
the crab mission was not fully done
no crab was facing up so you didn't get max points
Do you guys use bricklink studio?
Nice Job! Quick question, How hard is it to switch between all the different tools? or are they kind of like different shells you switch out.
I use a slip-on attachment system, so attachment changes are very quick. The fastest switches can take less than a second.
That was really good and already at the start of the season
oh shoot my bad
at 2:26 one of the sonar flaps were not flipped up. but still nice work!
@@IntanWork-j2r the panoramic view shot took several takes to get right, and I must have knocked it over during one of the attempts. Oops.
OMG you save us!! With this video we are going to pass our exam. Thankss!,
@@AnnePaulaFuldain ???
@@FLLshenanigans Let me explain. In my high school we have a subject called Technology. So the think is that this year, in this subject, the mark depends on how well we do the robot game. Although my team don’t take part at the contest we have to do it. The funny part is when we started with the work because anyone of my group knows how to program the robots or also how to build the robot. So in one class I decided to see some tutorials or something like that and I saw your video. Truly you saved us because is the mark of the hole year and now with your video we can make something. I hope you understand me well actually my english is not perfect but I trie to speak. Byeeeeee!!
@@AnnePaulaFuldain I see. That is very interesting. I have never heard of schools using FLL for an actual curricular grade.
Hi how are I wanna know if I reset the Hub to factory settings will perform our hub the best performance because we faced many problem with missions I hope you answer my question as soon as possible and if you don't mind show us how to do it
What problems specifically are you having?
Which lego set do you use to do these projects?
It comes with the mat when u buy it
Spike
Hello, good afternoon
Would you mind passing me the instructions for the tools? Please
@@juliatellezvazquez Only if you can prove yourself worthy.
cool but can you make a ev3 version for everything?
@@Theunholycheese How much spare time do you think I have? I put this together over summer break, and I now am fully In the school year. Also my ev3 set is broken and cannot process variables or motor positions, which are absolutely crucial to my coding.
@FLLshenanigans ok
@@FLLshenanigans quit yapping
@@FLLshenanigans Wait What? The map comes out in Augest not during June and July.
@SolverMindEduMy school has it’s summer break during the months of July and august. It took about 3 weeks to make this
Hi! Can you do a tutorial on the code for getting your robot so straight and accurate? and or the acceleration? (is it gyro straight?)
Also please share robot design. Specially the wheels part
Icarryuzr, it is videos about that already
Great job!
How many rounds did you use?
If you mean as in different times the robot exits base, 8
If you mean as in the amount of attempts it took to have a successful run of each mission, on average 3
nice Video!!!
Good job 👍 , can you give me your robot design
The robot rule book clearly states that all work presented at competition should be work done by the team. It is fine to use this video for inspiration of your mission plan/mechanics, but directly allowing you to copy me is a violation of that rule.
I would like to see a picture of robot unhidden by obstructions to see the wheel and gears
Congrats, guys!
gyaaaaaaaaat
!
Hi what kind of robot design did u guys use
I do not use any designing software, if that was your question.
Is it basic robot?
This is a good run
Do you use PID, or how do you plan to make it more consistent?
I use a modified form of PID that I may explain in a video soon.
@@FLLshenanigansPlease do so and if you do can you explain how to tune it.
@@Alex_Beranits so easy
@@VeerendrasakthiPrabhurajan Maybe for you, we were struggling.
That’s a cool bot, do you guys know about the 4 motor limit? Curious to know whether or not you used 4 motors. If ya did that’s really impressive 😮. Pls respond
Also good thinking about putting the research vessel sideways
@@vasastudios Yes. You can see the distance sensor and the glow from the colour sensor if you want proof. I understand your confusion, as there are multiple cases where one motor powers several things. For example, at 0:54, the hook that picks up the scuba diver and the plate that flips up the corals are both powered by the same motor, and everything else is powered by the other motor.
Really impressive, looking forward to seeing your run in tournaments
@@vasastudios I am an individual doing this for fun. I am coaching 2 teams, though
What is the best way to turn? Degrees, sec, cm? We use a backing up sequence off launch to square off the back board for a mil swc but still have gremlins (inconsistency in our coding) once it gets 3 or 4 turns deep.
I also ran into this issue last year. If you are not already using the gyroscope (yaw angle specifically) to turn, then you should definitely do that. If you are already using the gyroscope, consider adding deceleration (you can see it in every turn my robot does) to it and making it into a myblock
You mean slow it down before turning?
I will be pleasantly surprised is anyone can solve the math problem on my shirt at 0:53. :)
(3^2)pix40/360=pi (was it 40?)
😀😀😀😀😀
@@jingchen7739correct!
May I know what type of robot design is this?
That’s impressive
i love chez
can you share your base robot instructions
I cannot for a few reasons:
1. It will violate the spirit and rules of FLL
2. I do not use any programs to assist my construction, so I don’t have any building instructions
3. I prefer to avoid sharing personal contact information online
I will likely make a video on construction of a competitive base robot in the future, so stay tuned for that is you still need help.
Did you post?
We’re Lego miners 52922
Plz share all robot designs
Doing so would violate the spirit of FLL.
Also I subbed to your channel
Nice
could you share the codes
@@fishfinder7083 Only if you can prove yourself worthy.
@ i am worthy
Hello, I am part of a rookie group of missions, I would like to know if someone can give me advice for the atachments and others since we have an ev3 and not many lego tiles
Try with gears.
Up and lift.
simple attachment will do.
Just have to be goal oriented
For a rookie team with limited parts using ev3 (in my opinion inferior to spike), I have three main recommendations:
1. Spend a lot of time perfecting the design of the attachment to be as efficient and consistent as possible. For rookie teams, coding is usually a major bottleneck in consistency, so fixing this before the attachment even gets to the coding stage will be a major time saver. It will also give your team valuable experience.
2: Keep it simple. For a rookie team with little coding experience, a simple attachment will always outperform a complicated one.
3: Do not designate teammates to either building or coding. Instead, designate them by attachment and mission. (Eg, two people work on one mission, while two people work on another mission) .With two separate building and coding teams, the moment a mission starts to fail, the building team will blame it on the coders for not coding it properly, and the coding team blames it on the builders for building it poorly. It just ends up being a big waste of time and does not look good on your core values.
Bros Chad 😂😂😂😂😂
Mueller Glen
at 1:34 when the shark is put down, it says the shark has to be TOUCHING the mat in its habitat, which it does not look like it is :)
🤓
Right after the mosaic transition you can see that I have bent the tail of the shark to touch the mat.
@@FLLshenanigans OHHHHH ok that makes sense sorry if I sounded harsh haha :)
Plz share all robot designs
@goodgamer8065 only if you can prove yourself worthy. Find integers A, B, C, and N, all greater than 2, such that A^N+B^N=C^N.