BUILDING INSTRUCTIONS ARE NOW AVAIBLE!!! Use code "620MAX" to save 25% off of any order of PROJEKT ALPHA & QuickChange 2.0 Instructions. Valid through 9/17/24. Product Link: www.nxtgen-robotics.com/product-page/projekt-alpha-quickchange-2-0-building-instructions-stud-io-model Please feel free to ask any questions!
Hi how are I wanna know if I reset the Hub to factory settings will perform our hub the best performance because we faced many problem with missions I hope you answer my question as soon as possible and if you don't mind show us how to do it.
Could you guys please direct me from where i can actually learn coding please. Coding is interesting. Any help would be appreciated. Thank you in advance.
bro thats crazy our robotics team just started and last year my rookie team was 10 points away from having a chance at state but this year our goal is to make it to state. Also i have some questions. How long does it take to take off and put on new equipment and do you have any recomendations for the new season?
I used some advanced myblocks for all of the code including gyro turns, gyro straight, line squaring, and simple odometry to get everything as accurate as possible. I hope that answers your question!
I saw this video and had several questions and comments 1. In the description, you mentioned PID for turning. What sensor input do you use PID to control? Raw gyro rate? 2.in general, how consistent is it? If you tuned the turning, do you think you would be able to actually get everything to work at once to get a max point run with attachment changes on camera? (If so I would love to see it) 3. Interesting method for raising the coral tree. I have seen 5 content creators solve that mission with the bonus, and none of them are using the same method lol 4. With regards to M10, I don’t think that your robot is likely to score the bonus if it does the mission so early 5. Any other general opinions on this board? 6. Are there any improvements that you think you could make that you are now realizing after the video upload?
Oooo these are some good questions, I'll try my best to answer them :) 1. I use global gyro angle and compare it to the target heading (needs an angle wrapper function to work properly so its not great). 2. Some missions were really good others were not, but that was more of a hardware issue as I wanted to do my original ideas not simple and refined solutions. If I had another month (or even was able to work on it for a week consistently) I could do a full run on camera but with Uni starting up soon and FTC season starting I'd rather sped my time helping my teams get better than make a video hahaha (optimal run is approx. 40 seconds faster than this one). 3. Yea this was the idea I had day 1 (It was extremely consistent) and was able to build and film that mission in the 2nd week of August (also didn't want to copy anyone) 4. Yea in a solo run it doesn't matter and I didn't want to do the optimal pathing and show that off so early as it ruins the discovery that an actual team gets to make, but you're right it should be the last mission. 5. The field itself is great just wish it had more lines, the mission models have too much flex. I'd like to see a return to the 2015-2018 mission model build quality. 6. There are over a million things I would change but if I had to pick, it would be to combine the trident, sample/kelp/krill collection, shark deliver, reef restoration, and diver into one mission (that attachment would need a few weeks of R&D to work properly and consistently hahaha). Hope this answers your questions! Good luck this season!
This shows basically that FLL is dead. First Lego killed the needed products. With only primary school kit "Spike Prime" available at increased prices in toddler colour palette, aquiring stuff is no longer fun, and then First kills it by making a map that has no longer to do with designing robots, but looks more like a Lego Friends holiday resort. All you show are single-purpose dumb machines that are basically a one-trick-pony. Because the map has gone so overboard, it is impossible to design a "challenge" to do various objectives in a single run with a single robot.
BUILDING INSTRUCTIONS ARE NOW AVAIBLE!!!
Use code "620MAX" to save 25% off of any order of PROJEKT ALPHA & QuickChange 2.0 Instructions. Valid through 9/17/24.
Product Link: www.nxtgen-robotics.com/product-page/projekt-alpha-quickchange-2-0-building-instructions-stud-io-model
Please feel free to ask any questions!
Hola, no me permite realizar la compre. ¿Puedes apoyarme?
Hola, ¿cómo puedo contactar para una compra?
@Nxtgenrobotics Hello! I emailed you for some information about the wheel. But you didn't respond to me.
Could you the attachment you used for mission 12 feed the whale. We are having trouble to build an attachment for this mission. 😊
Will you make a tutorial on the pid straight driving because our team is struggling with accuracy.
Please where is the innovation project model placed on full submerged mat?
Awesome Job! Great control and accuracy of the robot.
Thank you!
amazing runs! the consistency with your motion profile is so accurate! Just a quick question, do yall use full PID or just proportional gain?
Good job! But I have a question: Did you use PID programming? If not, what type of programming was used?
thank you man for showing us how missions need to be done with very simple ways
Hello! I bought the schematic for the basic robot. Can I also buy from you the schemes for the prefixes that are needed to complete the missions?
Hi how are I wanna know if I reset the Hub to factory settings will perform our hub the best performance because we faced many problem with missions I hope you answer my question as soon as possible and if you don't mind show us how to do it.
Is it possible to get designs of some of these attachments? I can even pay something
I just went to the competition and my team (robotic rumblers) won 2 rewards!! This was amazing lol
What Lego set did you buys? Just registered really pumped was wondering where I can buy the Lego set you used throughout the video!
don't we have to collect treasure chest after raising the mast of kraken? seems you collected from outside. Great job overall!
Nope! we do it at the same time to make it easier and faster!
Is there an instruction for nozzles?
how is it that the trident handle does not fall off when you lift it?
The two rubber pieces pinch the two halves of the trident together and make it stay together.
When u did launch number 3, where did the krill go?
Great Job!
Thank you!
I’m a new coder for the Lego bot, first day coding and soooo interested with it so far
It is very fun. Hope you have a great time!
Could you guys please direct me from where i can actually learn coding please. Coding is interesting.
Any help would be appreciated.
Thank you in advance.
Brother, should I build a coral reef?
What music is dis
bro thats crazy our robotics team just started and last year my rookie team was 10 points away from having a chance at state but this year our goal is to make it to state. Also i have some questions. How long does it take to take off and put on new equipment and do you have any recomendations for the new season?
They are the very front pieces, and they come straight up and off very easy. I can tell there is going to be lots of lifting peices high😅
We use gear meshes to make the drop on and off attachments much faster, meaning that we only have to be in home for 2-3 seconds.
@@NxtGenRobotics thank you for responding to all the comments by the way so i subscribed
We are an older team that has made it 3 times now we find it best to focus on innovation and presentations, they are 75% of the score.
To save time you should use a precision token because it would save about 15 seconds and you guys are over and you edited out changing the attachments
Hello! I had a question. How did you get the acceleration & how did you code such precise movements at that speed? Did you use block coding or python?
I used some advanced myblocks for all of the code including gyro turns, gyro straight, line squaring, and simple odometry to get everything as accurate as possible. I hope that answers your question!
@@NxtGenRobotics Will you ever make a tutorial for the gyro straight, line squaring, etc on youtube?
@@Icarryuzr In the next week probably? Hopefully soon.
@@NxtGenRobotics Please release the my blocks acceleration and gyro straight code soon!
You guys used an amazing strategy for coral nursery 😮!
The coral reef mission is not done (Run 1)
whoa cool
Thank y'all this was fun and entertaining
Hello! Hve you used any sensors in your bot?
Hello, where can I get the building instructions, the link is not working
thanks (danke)that you showed me how to solf the puzzle
Hello!!
I wanted to buy the instructions of your model. Can I use the program together?
0:32 Does that count as points? Correct me if I'm wrong
Hi! What is the name of this music? I like it
Gracias por este video. A mi equipo y a mi nos sera de mucha ayuda.
Manuel 😮
That rack and pinion was amazing🤯
good luck to you all
-the master cubz
Thanks!
wsg
Congratulations, everyone!
I am a member of the Sorobóticos team from Sorocaba, São Paulo, Brazil.
Thank you! Were you at worlds last year?
Oh no, unfortunately not. But who knows, maybe this season, right? Hahah @@NxtGenRobotics
@@FLLbersi Yes! Thats always the big goal to try and get there but even nationals or regionals is an excellent accomplishment!
@@NxtGenRoboticsI completely agree with you! 😅
We won the regionals and nationals last year
what is this song called
Nice! We are building this lego set too!
Gracias! Ahora mis hijos lo entenderan todo y lo pasarn pipa! ❤❤
I saw this video and had several questions and comments
1. In the description, you mentioned PID for turning. What sensor input do you use PID to control? Raw gyro rate?
2.in general, how consistent is it? If you tuned the turning, do you think you would be able to actually get everything to work at once to get a max point run with attachment changes on camera? (If so I would love to see it)
3. Interesting method for raising the coral tree. I have seen 5 content creators solve that mission with the bonus, and none of them are using the same method lol
4. With regards to M10, I don’t think that your robot is likely to score the bonus if it does the mission so early
5. Any other general opinions on this board?
6. Are there any improvements that you think you could make that you are now realizing after the video upload?
Oooo these are some good questions, I'll try my best to answer them :)
1. I use global gyro angle and compare it to the target heading (needs an angle wrapper function to work properly so its not great).
2. Some missions were really good others were not, but that was more of a hardware issue as I wanted to do my original ideas not simple and refined solutions. If I had another month (or even was able to work on it for a week consistently) I could do a full run on camera but with Uni starting up soon and FTC season starting I'd rather sped my time helping my teams get better than make a video hahaha (optimal run is approx. 40 seconds faster than this one).
3. Yea this was the idea I had day 1 (It was extremely consistent) and was able to build and film that mission in the 2nd week of August (also didn't want to copy anyone)
4. Yea in a solo run it doesn't matter and I didn't want to do the optimal pathing and show that off so early as it ruins the discovery that an actual team gets to make, but you're right it should be the last mission.
5. The field itself is great just wish it had more lines, the mission models have too much flex. I'd like to see a return to the 2015-2018 mission model build quality.
6. There are over a million things I would change but if I had to pick, it would be to combine the trident, sample/kelp/krill collection, shark deliver, reef restoration, and diver into one mission (that attachment would need a few weeks of R&D to work properly and consistently hahaha).
Hope this answers your questions! Good luck this season!
Wow that was actually pretty dang impressive
Vcs nao teriam tutoriais desras montagen?
This season is tough with all its precise manoeuvres
I'm in Team 55750 in Glastonbury CT and this video has helped us out so much! Thank you!
I’m #57406
@@BengalsSBLIX im 60865
@@danielweaver7435 what team nane
@@BengalsSBLIX brickbotz
Well done
Time cap?
You’ve inspired me fun the coral reef, I had trouble with it tysm
It is really good that you got max points but try to do it in 2 minutes and 30 seconds
Very Impressive! Teams 7879 and 7891, Mount Airy, NC
Thank you! Good luck this season!
Hello! I'm from Brazil, yesterday was my first day in robotics and I loved it, I hope I can go to nationals😁
My first day will be in January
OMG, YOU ARE THE BEST
YOU ARE A COMPETIDOR ??????????????????????????????/////
I did my contest three days ago
thanks
you didn't reset the krill on launch 3
yeah
amazing are you going to comp
You're better than our team
nice👌👌👌👌
Rippin Forge
1:01
thats cute
OMG!
can you send me diagram building with code
You can't send code for FLL. That's not allowed as far as i know.
Bro competition is tomorrow
Iam from Egypt ❤
We are from the USA
yeah my team (skibooty) is so cooked if this is our comp
Hello
Hello
bro really violated that whale 💀
Bro is paying attention to the most unnecessary details what a disappointment lol
time cap
Idk if you guys know who this is but they might be better than teamsters
남찬 잘생김
1:31 ._.
Manoooooo
Manoo
Manooooooooooooooooooo
This shows basically that FLL is dead. First Lego killed the needed products. With only primary school kit "Spike Prime" available at increased prices in toddler colour palette, aquiring stuff is no longer fun, and then First kills it by making a map that has no longer to do with designing robots, but looks more like a Lego Friends holiday resort. All you show are single-purpose dumb machines that are basically a one-trick-pony. Because the map has gone so overboard, it is impossible to design a "challenge" to do various objectives in a single run with a single robot.
Mano
Great job!