2021 Honda Accord Bcracing coilovers install with stanceparts Aircups system
ฝัง
- เผยแพร่เมื่อ 9 ก.พ. 2022
- ‼️Front strut specs: top 44bs
Pinch bolt 61lbs
Suspension link 30lbs
‼️Rear top of strut 30lbs
Sway bar link 35lbs
Botton of strut 58lbs
Big Screw hold spring bucket or arm 51lbs
1:45Front coilerover install
9:30 compressor wiring
14:05 rear
Aircups www.springrates.com/stancepar...
Coilovers. www.ebay.com/itm/BC-Racing-Fo...
On the next video I found out I put the front coilover on the wrong side so I fix it and what don’t like 1/4” move stay tune thanks for watching
/ jrod.cuztom
![แฟนแนวใด๋ - ยูริ โตเกียวมิวสิค [OFFICIAL MUSIC VIDEO ]](http://i.ytimg.com/vi/4_XVMuhhbsU/mqdefault.jpg)
Looks like you have your front coils installed on the wrong sides so you'll need switch them around. The sway bar end links are supposed to be infront of the coil towards the front of the car, not crossed behind it like you have in the video. Other than that your accord is fire bro.
Thank bro I fixed it today 🙏
Great video
I’m waiting to see this “J”….I’m sure it’s going to be cool as hell…keep doing what you do Kidd.
Car looking sick 🔥
Thanks
Bravo tooooop 💪😎
Nice car!
Looks good…I liked the way when the back was up and the front was down, it makes the car mor aggressive that’s the way I’m going to do mine…good job..
Just put the front coilover 👍🏽
I installed D2 lowering springs on my accord and it has the drop with the front slightly lower... But i want the rear 1inch lower to tuck in the wheels. Your whip Lookin good homie!
Thanks Switch to D2 coil overs
@@JRod.Cuztom I plan to to switch to bags next month. just curious, how much did your setup run?
@@jzbreezio like 1400 because I got the coilover for 600
Losing the preload more or get shorter springs
Looks fire bro how low are you planning to go?
As low as coil overs go lol
👍👍❣️❣️❣️🥳🥳
I just got a 2022 Honda Accord hybrid and wanted to do a setup like this on my car, but I don’t know if this would support a hybrid since it weighs more. Do you know any after market parts that would support a hybrid Honda Accord?
I looked it up it looks like my Honda sport 2.0 is 3380 and hybrid is 3446 .. it’s only 56 pounds heavier. I don’t think there’s should be a problem.. I don’t know about hybrids ..
How is clearance on the front? Did you have to roll the fenders at all? Any rubbing?
Good no fender rolls no rub 20x8.5 42mm offset 245/35r20
If you could afford bags would you do it? Debating if I should or not 😬
Your ride looks fukn clean 🔥
Maybe in the future right now I just wanna enjoy my car as is
Nice job man. Couldn't explain it better 👏...where did you get that front lip?
You have to order on Instagram sfactorFabrication
Yea I spoke to them. They told me I have to drive and pick up the said the located in PA
That suck so no more delivery?
Look on Instagram at ez splitter they are almost the same a little cheaper
@@Dondon-fg5sk ez Splitter Instagram
You literally have my dream car 😞😒
Hey man BC told me the br’s I just bought have issue with this chassis. Mine are knocking really bad. You have any trouble?
Na bro mine are good so far
Did you get yours fix
@@robertserrano9994 i did. Pretty unimpressed with how BC does business but they finally filled me in about their original setup back when they sold camber plates as an extra cost accessory. They charged me another 100 dollars for springs and a couple small components which use the oem top hat. So I paid extra out of the gate for the camber plates that sounded god awful driving and then was charged another 100 just to get to their original setup that was initially cheaper. And now I dont have adjustable camber in the front but its not bad. Ride is excellent now they just really fucked me over bad, wont buy again just because of the pain in the ass process and all the smoke
What's the tire size you had on the rim
245/35r20 but my rim are 20x8.5
How many mm you have to order on the front one’s and how many for the back one’s too? , thanks!
20mm you can’t do the back
Ok thanks big man
Doesn't matter if I have swift springs?
@@JRod.Cuztom ?
@@pedrogutierrez2518 no you need a linar springs swift is good
I was disappointed with my cups because I couldn't go any lower on my bc br coilovers
I know that’s why I went extreme low you need short springs
@@JRod.Cuztom is this the max drop u goton the air cups with extreme low or could u go lower?
On this video it’s not the extreme lows
Should’ve just went with the coilovers alone you would’ve went way lower all around
Thanks for input