I really wish it had 10 channel out, clip indicator, built in RTA. Man if audio control decided to make a small bike friendly DSP it would be game over.
Same here. Want to do 2-8’s in each saddle bag lid. 2-8’s in tour pack lid, 2-8’s in front upper fairing and 2-8’s in lower fairing. Then I have speakers in the tour pack pods
I love your videos and channel, you always make everything easy to understand! I’m running two saddlebag subs, two lid speakers, and two fairing speakers and two amps (1 for fairing and lids, and 1 amp for the subs). Can I run one DSP for both amps or do I need a separate DSP for the second amp?
I have a 2022 Harley road glide special and am looking for the same set up but do I need the dsp, or is it recommended and if so could you explain to me why. Thanks love the channel
All right I get some frog tog stuff carry bag and I cut it out into @8.5-9” circle and use it between the grills and speakers with some one time water proof and yet to have water get through.
I have the DSP software on my PC laptop and not having the issue of seeing all the app screen. Wonder if it has to do with your screen resolution? Mine is running 1600x900. Can't wait to get one in the shop. When I picked it up at K-Fest, I was blown away how small it is (about the size of a pack of cigarettes!!!). Now just got to wait until they get to our distributor.
I have a 2022 Yamaha jet boat and the amps I'm running has a 1volt signal out from the first amp going to my second amp a 4 channel amp and then to my subwoofer mono amp. I'm feeling like the reason my midst and highs don't sound powerful is because of the only 1 volt going to the other 2 amps. Will this dsp help with this. I'm currently running a dd audio lineout converter to the 3 amps. If not what are my options to still keep factory conext screen running audio .
I use to be very familiar with installs years ago before DSP and line out put converter. My question to you is what is a DSP used for? Is it a amp with a built in EQ?
Carlos I have a Diamond Audio Neo speakers front & rear running on Sound Digital Amps. I have an older DSR1 DSP. Would this new Diamond Audio DSP have more features to warrant a change to it?
Help.. installed and getting loud ass noise with the rca going from the hu to dsp to amp..if i go direct hu to amp via rca no noise.. what do you to eliminate the dsp loud ass noise???
@@NVSAUDIO I watched a video where Carlos was saying that I could keep my Harley Davidson by Rockford Fosgate series 2 speakers, because they’re good speakers. I would like to keep them, add another amp and DSP and some subs in the bags. Just trying to see if it’s possible.
The Bluetooth is a total pain! It keeps switching my inputs to Bluetooth instead of my line outs from my head unit! I’ve “forgot” it on my phone but it still switches…ready to cut of antenna or throw it away…pure useless when it keeps switching, it also doesn’t turn off amps when it does this trick
The neo 6x9 is midrange bottoming out at 90hz. The 8” mid bass advertises 40hz but my ears tell me that’s ambitious. I have the 6x9’s with the 6.5s in my road glide and it’s really good but I’ll admit I’m hoping they come out with a mid bass 6x9 that can get closer to 30-40hz.
Floyd Kemp Floyd Kemp 0 seconds ago Hey Carlos do you have a video on installing a DSR1 paired with a Soundsteam HDHU 14si radio and Focal Amps on my 2014 Streetglide. I purchased the t-harness from you and its real nice but I need some help on hooking everything up.Thanks!
My bad for listening to your video. I bought the Diamond DSP. What a piece of ****, the dsp would not stay connected, the website to get the software is a dead link, calling customer service was impossible, you will get a message that they will call you back in 24 business hours, sent the dsp back for refund. After removing the dsp I learned my eq settings didn't need a dsp they were already flat. All I needed to do was adjust my gains on my amplifiers. Adjusting the gains on each channel is a must.
I’m sorry you had such a bad experience with the dsp . I don’t understand what you mean by the dsp would “stay connected “ the dsp connects to the computer via usb cable so how did it not stay connected? Only issues we have with these dsp is the gain slider would rest if the voltage dropped below 10 volts , and the remote turn on output wire causes a pop sometimes . We have installed over 100 with no issues other than the 2 I mentioned above.
Has anyone had issues with on and off pop with this diamond audio dsp? I installed with remote in and remote out and with only remote in and still pops. checked all grounds.. I tried 2 different diamond dsps and something...I put a different brand and no pop any advice? I'm running Fosgate pmx 2 head unit/ Diamond micro4v2/ and 4 Diamond mp525
I'm getting the same thing! I was told don't use the remote out but I was getting the same pop! Diamond told me to send it back in...so I'm waiting on the new one now. I'm running the audio without the dsp and not noise or popping going on right now!
Hi guys, does anyone have this crappy amplifier model? diamond audio hx1600.1, four of its chips numbered Q10Y_11_12_13 are burned and protected. Please, if anyone has the specifications of the 4 pieces with a magnifying glass, please send them to me - thanks
Thank you this is what I've been needing. Also that Gerald Albright 🎼🎶🎶 sounded great! 👌🏿
I really wish it had 10 channel out, clip indicator, built in RTA. Man if audio control decided to make a small bike friendly DSP it would be game over.
This software looks a lot like audio control.
Price tag would be insane but I agree
Same here. Want to do 2-8’s in each saddle bag lid. 2-8’s in tour pack lid, 2-8’s in front upper fairing and 2-8’s in lower fairing. Then I have speakers in the tour pack pods
@@Heavy69Metalyou should buy a car before buying a motorcycle. Your wishing shows a lot.
@@freebehindbars8654 I have 8 8” 2 6.5” will have 8 horns 4 large 4 small @4Kw RMS
Thanks for all that you do in your videos!
I’m sure you spent hours testing before the Video, we appreciate your Review. I need to set up an appointment once I get a new RG or Motor
I love your videos and channel, you always make everything easy to understand! I’m running two saddlebag subs, two lid speakers, and two fairing speakers and two amps (1 for fairing and lids, and 1 amp for the subs). Can I run one DSP for both amps or do I need a separate DSP for the second amp?
In windows settings, you can hide toolbar, temporarily fixes issue until they push out new software patch.
Great video
Go to Task Bar settings and set it to Hide that will lower the task bar and you should be able to see the rest of the screen 😎
Carlos try and Hide your taskbar. May make it easier to get to the bottom of the window
Have you made a video on the hki mini like you did on thus one because this one is awesome
I have a 2022 Harley road glide special and am looking for the same set up but do I need the dsp, or is it recommended and if so could you explain to me why. Thanks love the channel
New Arc psm will be smaller and 8 channel
All right I get some frog tog stuff carry bag and I cut it out into @8.5-9” circle and use it between the grills and speakers with some one time water proof and yet to have water get through.
I have the DSP software on my PC laptop and not having the issue of seeing all the app screen. Wonder if it has to do with your screen resolution? Mine is running 1600x900.
Can't wait to get one in the shop. When I picked it up at K-Fest, I was blown away how small it is (about the size of a pack of cigarettes!!!). Now just got to wait until they get to our distributor.
Yo are the man brother
Great video how do you set gains on dsps usually and when you set gain on dsp do you first set gain on dsp then amp
I set all the dsp gain sliders to - 3 , crossovers off , then I set the amp gains
Great stuff Carlos 👏 👍 I only have one?
I have plenty
Diamond trying to prove a point.
I have a 2022 Yamaha jet boat and the amps I'm running has a 1volt signal out from the first amp going to my second amp a 4 channel amp and then to my subwoofer mono amp. I'm feeling like the reason my midst and highs don't sound powerful is because of the only 1 volt going to the other 2 amps. Will this dsp help with this. I'm currently running a dd audio lineout converter to the 3 amps. If not what are my options to still keep factory conext screen running audio .
How does the HKI mini compare to this unit. Is it worth replacing the HKI mini with this unit???
What’s your thoughts on 66/88 vs the DSR1
NVS Audio!
I use to be very familiar with installs years ago before DSP and line out put converter. My question to you is what is a DSP used for? Is it a amp with a built in EQ?
Change the resolution on your laptop and the software application GUI can all be seen on the desktop.
I tried
Tell Diamond you want a refund until they fix the bug!
Change it to what? I tried to change it and still can’t access the crossover slopes at bottom of screen
@@rickydean5483 did you try to change the resolution and the percentage? If that does not work it is a software code issue.
have you tried changing the windows DPI setting?
Carlos I have a Diamond Audio Neo speakers front & rear running on Sound Digital Amps. I have an older DSR1 DSP. Would this new Diamond Audio DSP have more features to warrant a change to it?
No
The only added feature is the fact that is water proof . That was the number one problem we had with dsr1 . Water damage
Help.. installed and getting loud ass noise with the rca going from the hu to dsp to amp..if i go direct hu to amp via rca no noise.. what do you to eliminate the dsp loud ass noise???
Hide your tack bar?
Rate the Harley DSP’s you use from best to worst!!
Maybe if you change the display resolution of the pc you can see the whole page.
I tried all the others
Made it worst
Man, I got one, installed it and then discovered there’s no way to tune on iOS. Crazy bummer. Back to the dsr1. 😢
Would that work with the CVO Rockford series 2 speakers adding the diamond audio 10s with amp?
Yes but it would be tricky to wire
@@NVSAUDIO I watched a video where Carlos was saying that I could keep my Harley Davidson by Rockford Fosgate series 2 speakers, because they’re good speakers. I would like to keep them, add another amp and DSP and some subs in the bags. Just trying to see if it’s possible.
@@travisgray3331 it is possible
The Bluetooth is a total pain! It keeps switching my inputs to Bluetooth instead of my line outs from my head unit! I’ve “forgot” it on my phone but it still switches…ready to cut of antenna or throw it away…pure useless when it keeps switching, it also doesn’t turn off amps when it does this trick
Have you been having any issues with the Diamond DSP? The ones we have are not working well.
@@ShadowSolja what issues are you having ?
@@NVSAUDIO install it and it makes pop noises in the speakers and then shuts off. Also met Brandon today. Great guy!
Set your task bar to auto hide!
Is Diamond audio coming out with a true 6x9 neo midbass to complete their lineup?
I believe they do already.
@@extremebaggers7817 that neo that dropped last year? I thought that was a mid-range.
The neo 6x9 is midrange bottoming out at 90hz. The 8” mid bass advertises 40hz but my ears tell me that’s ambitious. I have the 6x9’s with the 6.5s in my road glide and it’s really good but I’ll admit I’m hoping they come out with a mid bass 6x9 that can get closer to 30-40hz.
Floyd Kemp
Floyd Kemp
0 seconds ago
Hey Carlos do you have a video on installing a DSR1 paired with a Soundsteam HDHU 14si radio and Focal Amps on my 2014 Streetglide. I purchased the t-harness from you and its real nice but I need some help on hooking everything up.Thanks!
My bad for listening to your video. I bought the Diamond DSP. What a piece of ****, the dsp would not stay connected, the website to get the software is a dead link, calling customer service was impossible, you will get a message that they will call you back in 24 business hours, sent the dsp back for refund. After removing the dsp I learned my eq settings didn't need a dsp they were already flat. All I needed to do was adjust my gains on my amplifiers. Adjusting the gains on each channel is a must.
I’m sorry you had such a bad experience with the dsp . I don’t understand what you mean by the dsp would “stay connected “ the dsp connects to the computer via usb cable so how did it not stay connected?
Only issues we have with these dsp is the gain slider would rest if the voltage dropped below 10 volts , and the remote turn on output wire causes a pop sometimes . We have installed over 100 with no issues other than the 2 I mentioned above.
Has anyone had issues with on and off pop with this diamond audio dsp? I installed with remote in and remote out and with only remote in and still pops. checked all grounds.. I tried 2 different diamond dsps and something...I put a different brand and no pop any advice? I'm running Fosgate pmx 2 head unit/ Diamond micro4v2/ and 4 Diamond mp525
I'm getting the same thing! I was told don't use the remote out but I was getting the same pop! Diamond told me to send it back in...so I'm waiting on the new one now. I'm running the audio without the dsp and not noise or popping going on right now!
I had to add a pr4and not use the out
Sepuede intalar a un auto para un sistema pequeño
Hi guys, does anyone have this crappy amplifier model? diamond audio hx1600.1, four of its chips numbered Q10Y_11_12_13 are burned and protected. Please, if anyone has the specifications of the 4 pieces with a magnifying glass, please send them to me - thanks
What is it in size comparison to the DSR
1/3 the size
@@NVSAUDIO wow AMAZING
Auto hide taskbar
Just cking