Tips for tinnie owners

แชร์
ฝัง
  • เผยแพร่เมื่อ 4 พ.ย. 2024

ความคิดเห็น • 15

  • @kevinkitchen3351
    @kevinkitchen3351 วันที่ผ่านมา +1

    Enjoy the tinnie, very versatile platforms. I would add a chain or cable between the outboard and the transom support. Make sure there isn't any slack in the connection, so if you're unfortunate to have an outboard come loose, you won't lose it over the stern. Very cheap insurance.

    • @wontstandstill1756
      @wontstandstill1756  วันที่ผ่านมา

      @@kevinkitchen3351 thanks Kevin, good points

  • @oldmate_adventures
    @oldmate_adventures 3 หลายเดือนก่อน +1

    Have A good trip mate 👍. You'll love Shelter Bay, is still good on a windy day! Take lots of spare tackle, bulk snags and bitey things up there 👍👌

    • @wontstandstill1756
      @wontstandstill1756  3 หลายเดือนก่อน

      @@oldmate_adventures thanks brother,,,,need to place another order for your rigs before we go

  • @BurrupAndAway
    @BurrupAndAway 3 หลายเดือนก่อน +1

    Deutsch plug 🔌 the one on your sounder/battery setup it looked like there Paul 🙂 great little setup tinny mate, enjoy ya trip!

    • @wontstandstill1756
      @wontstandstill1756  3 หลายเดือนก่อน

      @@BurrupAndAway cheers Rohan ,,only six weeks until Shelter Bay ..

  • @courtneymccagh3815
    @courtneymccagh3815 หลายเดือนก่อน +1

    Gday mate. What size and make is your tinnie? Good setup. Cheers

    • @wontstandstill1756
      @wontstandstill1756  หลายเดือนก่อน

      @@courtneymccagh3815 hey mate
      3.54 anglapro with a 15 hp 4 stroke

  • @zfontes
    @zfontes 3 หลายเดือนก่อน +1

    Do you coat the aluminum with anything to prevent salt corrosion? Just curious, great tips too thanks!

    • @wontstandstill1756
      @wontstandstill1756  3 หลายเดือนก่อน

      @@zfontes hi mate ,, hadn't planned to ,what are you thinking?

    • @willshunting
      @willshunting หลายเดือนก่อน +1

      To avoid galvanic corrosion of the aluminium, all mating surfaces and fastener threads should have a liberal coating of Duralac. I also insulate my trailer and motor from the hull.

    • @wontstandstill1756
      @wontstandstill1756  หลายเดือนก่อน

      @@zfontes hey mate, no I haven't but ,,,will look into that 😉

  • @samhaveaguess4284
    @samhaveaguess4284 หลายเดือนก่อน +1

    Mate .. You ran your motor without the water pump in water .. Bad bad bad move .. If your going to run the motor you must have it in water ... And not use the no run flush system.. Best way to burn out your impeller.. You mechanic is correct.. Best to run carbi dry .. But I do it at the end of the fishing trip .. Before taking out of water ..

    • @Carl223
      @Carl223 23 วันที่ผ่านมา +1

      You can hear him say connect some water then run the carby dry of fuel. You can also hear water running and see it coming out the telltale while the engine is running

    • @samhaveaguess4284
      @samhaveaguess4284 12 วันที่ผ่านมา

      @@Carl223 Yes .. He connects the water but to the flush system .. That is used to flush the engine without running the engine.. If you start the engine the water pump is running dry .. And will burn out .. The house he connects just runs straight into the engine...