Rubbish Dump Chainsaw Find Repairs Video - Will it run?

This week I have a spares or repairs chainsaw to have a look at. I picked this up for only £10 from my local recycling centre. Did I get a bargain or is it scrap? This video gives you an insight as to how I go about flipping a small 2-stroke engine for profit.
Link for gasket kit: ebay.us/yLAoLg
link for spark plug: ebay.us/VxDCKx
carb cleaner: ebay.us/Naitad
Thanks for watching, please don't forget to like and subscribe
Disclaimer: This video is meant as a guide only and I don't accept any responsibility for damage caused to yourself or your equipment from following this video. Stay safe and be sure to wear the correct PPE.

[@damirjaklin9444]

A really good video.Thank you!

[@pinkyellowblue007]

I've worked on a couple of these, pretty good saws and easy to work on.

[@highmilitiagilligilliatt2508]

A man of many talents, another great how to tutorial, brilliant 👍

[@TurnersWorkshop97]

Thank you my friend, I appreciate your comment 👍🏼🙂

[@jamesfarley5183]

good vid .i did notice u reversed the metering diaph and gasket.the gasket goes against the body then the diaph. the gasket serves as a seal and spacer for correct clearance if the lever is set correctly and diaph. pin is correct length , then it will run rich and /or flood.

[@TurnersWorkshop97]

Thank you, well spotted 👍🏼 I will remember for next time 😁

[@DARTraderMediaProductions]

The foam air filter should be washed out and dried then soaked in clean oil and the excess oil squeezed out. If left dry it won't be as affective at catching the finer particles and mixture will be off. Best to do your finer tuning after you've oiled the filter, I just used engine oil that I got for our Suffolk Colt mower but any thin motor oil would do. Great stuff and many thanks.

[@TurnersWorkshop97]

Great tip, thanks for reminding me 👍🏼 cheers mate

[@stevefromlondon9175]

Thank you for this video it was a great help as l just got a second hand one
Regards
Steve U.K. London

[@TurnersWorkshop97]

No worries mate, glad it was useful 😊 thanks for watching

[@noahneji5808]

you did the metering side reversed, on the metering side of the carb the gasket goes first and then the diaphragm.

[@TurnersWorkshop97]

I know, silly me 🫣 well done for spotting it and thanks for letting me know :)

[@andrewdowniephd]

Great wee video. I wondered whether you had any info on the fitting of the various springs for this model as I have had a couple snap on an old saw I rescued from a neighbour's skip?

[@TurnersWorkshop97]

Thank you 😁 is it the chain brake spring you’re talking about?

[@andrewdowniephd]

@@TurnersWorkshop97 It's a spring between the handle and the main body of the saw.

[@465painkiller465]

@@andrewdowniephd Had the same on mine but actually replaced with thin bit of sheet metal and that seems to have worked fine. Kind of a whack job tho

[@tristrambishop1239]

Might be the AV Shock spring mount

[@vasilegirigan5096]

💯💯💯👍👍👍🤝🤝🤝

[@constantinsava1077]

Din două am facut una dar porneste greu de ce.