Honeywell RTH2510 7-day Thermostat | MANUAL Override Programming | UPDATED How to QUICK Guide
ฝัง
- เผยแพร่เมื่อ 28 ก.ค. 2024
- This video tutorial will show you 2 ways of manually overriding your Honeywell RTH2510/RTH2410 digital thermostats temperature set point. This is the quickest way to keep your heat or cooling on.
+Stay tuned for more videos...every Tuesday & Friday!
+Further SUPPORT the channel by purchasing ANYTHING thru my Amazon links below:
7 day Thermostat: amzn.to/3muUbJG
5+1+1 day: amzn.to/34zfUdp
5+2 day: amzn.to/31Orhfo
Simple 2 Button Manual Style (NO programming): amzn.to/35ICEqm
Want to SUPPORT the Channel? Info & Links below!
SUB & DONATE Here - / johnfranconh
FOLLOW - / contemporary_homestead
& HERE! - / contemporaryhomestead
Stay tuned for more videos!
Contact: JohnFrancoNH@gmail.com
Thank you to the following artist(s) - Music info/credits below:
TH-cam Music Library - บันเทิง
I hate this thermostat
Patience young grasshoppah..Thanks for watching!
Same I want to smash it
Me too
Me too!😩
Me too its a piece of shit
Thank You...Crazy how a simple thermostat can get so convoluted..
This is perfect information. Just what I needed. Thanks for posting!
This video is life saver. I was struggling with this difficult thermostat. Now i am all set ☺️
I still don't know how to work my mom's thermostat
Thank you!!! I was ready to call a heating contractor. Bought this new house and it is only 6 years old and the previous owner had crazy settings and no manual!!! Saved me a service call.
Thanks so much for this two year old video. I have a friend who doesn’t know how to send this, I couldn’t figure it out either, and the air conditioning always wanted to stay on, even though I would set the temperature higher and press the hold button. I guess you don’t have to hold the hold button down for long, like I was doing, you just press it once.
Thanks so much!
Thank you! I’m in a vacation rental and this thing was driving me crazy! So simple once you realize..
Glad it helped!
You must have more brains than alot us
To everyone trying to figure this out, just click “Hold” after setting temperature.
I did do not work 😩
It still goes back to the whacky setting at whatever day and time. It's maddening.
It'll steadily warming up while I sleep and getting all nice and frosty...while I'm at work!! 😭
Doesn't override on mine
@@sarahsaavedra4732mine either
I moved into a rental and they had it set at 65 in Arizona which was causing my bill to be double! This video saved my wallet, thank you so much. Was able to remove the hold function and set it to a normal temperature.
Silly goose 🦆
Thank you so much, you're a life saver, you simplified it for me.
I like the hold override because you set it to whatever you want and it stays there and will only kick on when it goes below your temperature
how can you just turn heat on and off?
This thermostat is too complicated for the average bear. There are others that are so much easier to use.
amen 🙏
Exactly
Agree
I have a PRO 1 T-701 the worst Thermostat on market. Many Companies don't have Manuel's with their items. Also, very unreliable workers. You have to ask them to check all your units. These clowns just install, and walk away with an outrageous price, which was only store bought priced $43.00?
Like what? I just moved in and I’m sweating my a$$ off
Thank you for the video..I was burning up in my new apartment ..ac kept kicking off and going to higher temps..your instructions were helpful ty
Thank you! This has been driving me crazy!
Thank you sooo much!!! Very helpful and well explained, I was completely lost and frustrated lol
Yes, thank you for simplifying! I was up all night struggling with this thing. I was close to ripping it off the wall and throwing it in the trash.
Super informative and very clear information about the function of this kind of thermostat .thank you so much!! 👍👍
Thank you finally I understand how to use the thermostat.
Simple instruction/ very good...I'm doing heat but think it's the same. thanks.
Glad it helped
THANK YOU SOOO MUCH!!!!! This was a life saver!!! Just moved into a new rental and thought I might melt!!!
Glad I could help!
@@JohnFrancoNH the override trick doesn't work for me now. The ac is running but now my blower won't come on
Spot on dude!
Man what a perfect and helpful info thanks man
Thank you very helpful,I just moved to a rental,I thought something was wrong and are heating bill was going to be threw the roof.i don't care for this unit.i like the regular one you can turn up and down,just simple! This video saved me!!
Thank you. It was so hot in my apt lol. This worked.
I followed your instructions thank you so much. When I come in the house it’s 80degrees
simple instructions for complicated device. thank you
Thank you for posting this! It was very helpful!
Glad it was helpful!
Thank you so much!
Excellent tutorial!
Thanks for the video! Moved into a new condo playing hell to get this thing to work!
Thank you so much!!! I couldn’t figure out why my thermostat wasn’t cooling the house. Apparently someone played with the SET button and it was all screwed up. Thanks again!
I'm having that same issue right now I hope I don't have to listen to the whole video because it's freaking hot in here
THANK U!!!!!!!! Excellent clear clean direct 👏🏾👏🏾👏🏾👏🏾👏🏾👍🏾
Thanks, I will try to set up my apartment heat follow you directions
Heat jumped right on thank you!
Very clear. Thank you!
Thank you!!! Excellent explanation.
Thanks bro!! You save my life!!!
Thank you, I really enjoyed your video, it was very informative. My husband installed this thermostat. We live in the Chicago area, we still have our heat on. I set the temperature to HOLD, the heat would kick on then it seemed as though the thermostat started to malfunction, I set the temperature to 77, the room temperature would drop to 70 a 73 before the heat would come on. Now the heat won’t kick on at all.
After following your directions I can't get out of the temporary function after selecting the hold button
Thank you for this VERY helpful video. ☺
Glad it was helpful!
Greetings from Portland, Maine…Feb. 3, 2023 @ 10 p.m…..arctic blast this weekend through Monday…..-18 right now and high winds from the White Mts., blowing down the lake.
We’re expecting a predicted low of -21 tonight (wind chill…-40) and -22 tomorrow night.
I’ve never experienced this sudden a drop, even growing up in Boston.
Another climate change adventure I could have passed on!
John, you’re saving my life tonight with this video…the exact information that I needed confirmed…the manual over-ride to turn on additional electric baseboard heat (now that the inside temp is heading toward 56 degrees) despite my 2021 Mitsubisi high heat pump cranking at 75 degrees (usually set at 65 max).
I haven’t used the electric baseboard heat in two years, so I was going by memory to over-ride the Honeywell to start the heat via Temporary.
I had copies of this model’s user manual on my laptop (now on the disabled list) and downloaded to my iPhone ( Safari was preventing the file from opening)…Murphy’s
Law!
I have the paper copy filed away, but I needed the info ASAP. Thought of TH-cam…one of man’s best IT developments!
John, you came to the rescue….THANKS! I did remember the Hold vs Run button functions…but the Leave message was displaying at the bottom of the window. I must have pushed both buttons thinking I was clearing the pre-set.
Thanks to you, I’m back on track…the thermostat is set at 72 ….the baseboards are putting out heat and it’s now a comfortable 65 degrees!
I think I detected a bit of a Maine accent. I’m “from away”, so I’m attuned to certain words.
Am I right? I’m now subscribed and will look for your other instructional videos.
Thanks again! JMullen…your newest fan club member.
I have now saves all three videos in your series for next year
Joanne you are correct im in southern NH and outside temps are brutal right now as you mentioned. Glad the video was of much help!
Thanks for sharing that's help me alot 😊 💗
Wuuuuu this thermostat has been driving me nuts thank u 4 this video dangggg😞🙃😩😩😩
Omg thank you so much I’ve been burning up it’s been so hot
Thank you so
Much. Thought I needed a new ac
Thanks our temps are dropping and this was definitely a life saver
Thank you gentlemen
Thanks again for override info id forgotten, my schedule is different to set. Learning to program in 95° temps too hot!
I know I'm stuck right now in 85° cant get my override to kick it on for me now..
@@sandradevlin1344 same omg help
Hate the thermostat but very appreciative of your clear instructions!!
Thank you for walking me through that!
I've been watching your helpful videos,do you by any chance have hidden setting for an htr2300b honeywell thermostat,thank you.
Check out part 2 see if that helps. Thanks for watching!
Hi. Under fan my husband sets it in the middle between Fan and Auto. What does that do? Can you explain? If I put it on this we get heat but it seemed to run evey 7 minutes. Not sure if that is normal.
Make one where I know how to turn up the heat and I can hear the furnace kick on I’ve watched 10 of these videos freezing my ass off
Me too
@@tracycarrazana2170 it ended up being the circuit board component the video was telling me how to do it correctly
if I want to turn the heat up or down immediately how do I do it
Thermostat numbers info on but no air or heat turns g in is it maybe cause sleep mode is on I'm freezing help please
Thank you lots!! Finally no more shake and bake...Whew
Do you need to Lubricate the back pins of the Thermostat? When I replaced the batteries on my Honeywell thermostat I noticed a grease honey color Lubrication on the pins, what is that? Can you provide the exact name/link description?
Think you solved my issue and believe I'm fixed thanks
Everytime I set the thermostat to a certain temperature it changes to a whole other temperature, how can I stop it from doing that, I just want it to be the temperature I change it too
Hello John Franco, under the time it says the day of the week: How do I get the day of the week to go away like on your video?
(I appreciate any help you can give me, thank you).
So soon as I hit anything it fades to green where you can’t see anything on the screen so you are guessing what you are hitting. Then it goes to room temperature and gets dark where you can see it again. I want to put the heat on hold at 65 but can’t see anything! HELP
If I have a set schedule and then set it at a hold temp, will that hold temp run even if the room temp is lower than the hold temp?
I have a set temperature in hold for 74 the unit is in and running but it’s not cooling down, the temperature won’t drop past 81 in the house, what could it be?
You left me confused about something, when I set to manual override for good lets say
does it still cut off the unit when it reaches the desired temp and come back ON when
temp falls below the desired setting .Thanks a lot
How long does it take to turn back on when its on auto?
Can this thermostat be set to cycle every 20-30 minutes?
Can you recommend a higher quality thermostat.. the heat does not l stay on long enough .
Hi Thanks for the vid - so, if i override in "Cool" mode. It is set to 72. It will stay that way. BUT, you siad if i turn it to "off" or " Heat" the
cool mode will no longer have that override set to 72, correct? Switching to Off, or Cool or Heat, it reset the override to null?
Omg I’ve had temporary on for the longest time and it wasn’t getting any cooler, hoping this helps which I’m sure it will.
Thanks. I am trying to keep my heater from coming on so much and costing us a lot of money. I hope I did this correctly.
How can I change the settings from 24 to 12 hrs. I´m retired and spend most of my time at home but like it cooler at bedtime. I don´t want a weekly schedule. We live in FL our home is an oven. Please help. Thank you
It was easy & really helpful.
I have this thermostat but I don’t like it can change it? Only the controller
Thank you. I was about to call maintenance.
This thermostat really sucks. The hold button is not overriding the program. I wake up to freezing temps and the Ac is still running
So I have my set to run 8 hour and then turn off as scheduled but on auto during that time it shut off and on every 15 or 18 min and then it turn back on again is that normal I don't want my system to get ruin.
What does it mean if I'm not getting a click when I set the degree I want?
When I hit hold it showz "wake" on the thermostat
I've open to heat but no hot air coming in.
Please help, when my heat comes on ut also blows out cold air!!!! I have it set to a schedule I never put it on AC. Didn't even know that was an option during the hot summer. 😳 right now the temp outside is 30°. I'm in bed under the blankets trying to stay warm. Just had surgery Tuesday, need to be warm. How fo I get heat without the fan. My settings are on HEAT ,72 AND AUTO
Can you override the minimum temperature?
So I turned it off waited a minute the hold I original had it on didn’t disappear - do I hv to hit Run? It went back to 63 in here - I turned off turned on then arrowed it up to 68 hit hold - it returned to 63 and didn’t kick in ? Or do I override previous setting by hitting Run ? First instead of turning off on switch on bottom?
Thank you!
My furnace does not come on when I raise the temperature above the current temperature when I use the temporary or hold functions. I have the switch on the bottom to heat and fan is on auto. My heat is gas baseboard hot water. Is there something else I need to do?
I’ve watched all three videos. My problem is that I am having trouble returning to default settings. I set function 40 to 1. I was thinking this should make all settings the same as p. 12 pre-sets but it won’t change from what I had in before. Do you know what I’m doing wrong? Help!!! Thank you!
hi, I have theRTHL2510/RTHL2410. Thank you for your informative videos. I live on a top floor of a shared building and I don't want to set any temperature. I just want the heat to turn on at a certain time/hr, and off at another one. Is there a way to do that?
Watch part 1 that will guide you in programming. Thanks for watching!
@@JohnFrancoNH hi hate it can program im frezze the heat never on
I was able to cancel all the scheduled times but then the word “hold” is on the screen and the heat won’t come on? What am I doing wrong?
thank you for your great info. I pulled mine out and threw it into the trash!! I got a simple-to-use LUX 1500 so simple to use and does it all.
Great tip!
Thanks so much for the easy instructions. I’m in New England and was waking up to a 61 degree house!
Thank you!!
So when it’s set to hold will it still turn off once your house has reached the temperature you set? Or will it continue to run forever? I’d like to set a temperature and have it stay the same at all times until it reaches my desired/set room temperature then it should turn off until the room gets warmer the temperature set and Back back on. That’s what I want I don’t really want a schedule just want it to turn on when the temp in the house is warm and then turn off once the house has reached set temp.
If that makes sense to you 😂
Yes HOLD will only hold the desired setpoint once it is reached by your HVAC system then it will shutdown until there is a call for heat or cooling once again. It is NOT a permanent on function.
THANK YOU !!
You're welcome!
What if the temporary/hold doesn’t make heat start? It does nothing.
Sir you my life saver😇
I'm having trouble setting the cold air on, could you do a tutorial on A/C and the auto and fan options please.
How do I delete the hold button on my thermostat?
Confusing because I just want to change my temperature as I please. I live in Texas and my unit cuts off at night because this process is not simple.
I did everything you said but I did not hear the click after i set the new temp. Also the temperature never changed??? Not sure why it is not working.
So on hold it override the programming?
Hi. How do i unset dates and times? I want system to auto on at 70 degrees every day all day.
How do you shut the heat off can I just press the off button
Thank you!!!!!!
I changed the batteries and the degrees are at 26.0 do
I need to do a reset and how