After a long time came up with this knowledge, Top 5 Amazing Ideas

After a long time came up with this knowledge, Top 5 Amazing Ideas
AMAZING! TOP 3 POPULAR IDEAS!
-----------------------------------
• I can't believe I just...
• it took me 30 years to...
• Many People Do not kno...
TOP 3 IDEAS USING CEMENT
------------------------------------
• Why didn't I know this...
• The secret revealed! T...
• I wish I knew these th...
BEST 3 INVENTIONS
-----------------------------------
• It took me 3 times to ...
• The manufacturer doesn...
• Why didn't I know this...
IDEAS USING WOOD
----------------------------------
• after knowing this you...
• Few people didn't know...
• I TURN IRON BOX PAINT-...

[@georgiacitizen7175]

I sure hope that Santa Claus is watching , and sees just how bad you need drill bits for Christmas this year!! Cool ideas man! Thanks for sharing! I gave you a BIG THUMBS UP! GOD BLESS!

[@ndotransportcooperation177]

Nais kopong makasama uli lahat ng bomoto saakin na naniniwala sa mga programa ko ibaba ng 50% up to 80% ang ginagamit ng pagluluto ng bawat pamilya ng tahanan.
Ngayon po ito na KALAN USED OIL po,maghapon magdamag supper tipid nais kong lahat makatipid kontra LPG,gasolina, kirosen,dahil subrang taas na lahat ng mga bilihin.

[@creativeideas5041]

Thank you

[@paintvarnishtv2645]

Galing Naman gumawa Ng kalan na langnges

[@creativeideas5041]

Thank you

[@WHEELSRODSADVENTURE]

is it posible to use used cooking oil instead of petroleum. petroleum fume when burning is cancerous. and no tar residue

[@KAvlogerTv]

nice one idol watching from Philippines

[@creativeideas5041]

Thank you for visiting 😊

[@ZCRAIZED1]

At 9 minutes into the video it doesn't show what air pump or fan was used to blow air through the pipe and the holes in the burner. That's the way it works I understand but why not show what forced air method?

[@user-xn8xt1cp2d]

well done, it turns out very well, it's very pleasant to watch

[@creativeideas5041]

Thank you

[@diyadventuresatbp]

The best lodz. Makakatipid talaga sa LPG o kuryente! 👍👍

[@creativeideas5041]

Thank you 🙏

[@zaikiyuriiko5362]

24:43 ni no😮​@@creativeideas5041

[@MrFlycook]

Thanks cuz It really helped a project i was already working on

[@creativeideas5041]

Great!

[@boymalasogeofficiatv20]

Nice one DOL THANK you for sharing ,👍🥰

[@creativeideas5041]

Thank you too

[@zecjulian]

I am watching and learning how to do it. I wanted to try to make one😊

[@creativeideas5041]

Go for it!❤️

[@phatmurstv1932]

wow nice good idea new friend amazing wow.sending my full support host.tamsak done at dikit fullpack kalimbang all. kasano from pilipines

[@creativeideas5041]

Thank you my friend ☺️

[@liandaalvin4404]

Akayy mantap terimakasih banyak atas ilmunya dan pengalaman x semoga bermanfaat

[@creativeideas5041]

Thanks for watching

[@quevicular]

you missed the part about welding the cap on the back with the threaded pipe? y?

[@ndotransportcooperation177]

Sama samahin natin mga gumagawa Ng kalan use oil

[@creativeideas5041]

Thank you for watching

[@aliciolaya4405]

Gracias 👍👍👍🇻🇪

[@creativeideas5041]

Appreciated 😊

[@vulcano911]

Luckily he's wearing his safety gloves.

[@creativeideas5041]

Thank you

[@Mr.D.I.Y09]

I like ur diy berry cool

[@creativeideas5041]

Many thanks to you my friend,

[@catoelip]

Ordet

[@user-oc5hx4bp9w]

Hi idol i'm here in jupiter 🪐 watching you.👽

[@creativeideas5041]

Thanks for coming

[@juliosalazar8689]

Assistindo aqui de Long Beach California

[@creativeideas5041]

Hello thank you for visiting ☺️

[@godofredoatienza3763]

Yan ang gamit nmin sa pagluluto hinihingi ko lang sa mga kaibigan ko yung pinag change oil lan

[@creativeideas5041]

Thank for sharing

[@craigtegeler4677]

Crude construction but very effective is what I would say! It could use much better construction practices and better
refinement but how is this burning of oil emitting these kinds of gases that you would ordinarily see such as with the
use of propane that gives us the clean blue flame that is most common to the use of propane or natural gases???

[@xmysef4920]

because the flame of a gas stove is a premixed combustion, basically the fuel is already mixed with air before it combusts. This makes sure that there’s no rich areas of fuel, which cause incompletely combustion, causing soot and a yellow flame.
Basically, blue flames mean very clean/complete combustion (very hot), while yellow flames mean incomplete combustion (less heat and more soot).

[@LifeHackS-wc9ne]

Best oil stove # 1

[@creativeideas5041]

Good choice

[@Sonubhai-ug5uc]

U R GREAT INVENTOR

[@creativeideas5041]

MANY thanks 👍

[@Entertainment2.200]

Induction is best I think because fan we need electric and though it's use oil but need oil if no oil no flame

[@louierivera1011]

kay galing naman

[@creativeideas5041]

Thank you

[@paulabbott3798]

HOLE SAW... but I must say you can cut a nice round hole with that grinder

[@creativeideas5041]

Thank you

[@aboradalolyani]

آخر واحد هو الأفضل👍🏻

[@creativeideas5041]

Thank you 🙏

[@tanaduen2650]

Verry good,sukses

[@creativeideas5041]

Appreciate 👍

[@RustyInventions-wz6ir]

Just found your channel and Subscribed. Very nice work

[@creativeideas5041]

Thank you 👍

[@hariyonohariyono5767]

Ferry nice👍

[@creativeideas5041]

Thanks for the visit

[@onoomy]

Good thing you had your gloves on. I mean they look to do alot of good.

[@creativeideas5041]

Appreciated thank you 👍

[@versovill]

Paano papatayin iyan? Sana magawa mo din ang hydro water stove mas malinis at safe pa.

[@teamkablessingvlogs32]

wow! Amazing bro❤

[@creativeideas5041]

Thanks 🔥

[@jonesgear9yt]

Can you make another where oil and air are integrated.morev power bro

[@creativeideas5041]

I'll try my best 👍 keep in touch

[@GregLapitan-lz4ok]

Astig ng gloves mo idol meron ba niyan sa shopee😂😂😂

[@creativeideas5041]

Thank you for watching

[@axlered9828]

Amazing

[@creativeideas5041]

Thank you! Cheers!

[@user-ye4rn8hs4u]

Редко встретишь напрасно потраченное время,

[@phatmurstv1932]

mmlso new friend diy fabrication

[@creativeideas5041]

Appreciate 👍

[@user-gs4sq4eh6u]

Цемент от перегрева взрывается

[@victordonato6440]

Amoy krudo yung niluluto

[@mickgatz214]

What's if the table wasn't level? 😂👍

[@creativeideas5041]

Thank you for watching 😊

[@coachgeo]

on the first one.... are you blowing air into thru the larger pipe you installed into the burner ring... or is it sucking its own air in?

[@creativeideas5041]

Yes sir

[@lhetwincompletado5811]

​@@creativeideas5041❤❤❤❤❤

[@MrFlycook]

Suggestion mix dish soap in your cement & it will make your projects lighter with no loss in durability

[@creativeideas5041]

Thanks for the tip

[@kylejennings4971]

.@@creativeideas5041 Don't believe it research it because I went to school for concrete work and it is sometimes used in cold climates as antifreeze but it definitely weaken the psi strength

[@belasalamon4767]

These burners have a big problem, namely that they cannot be cleaned of the deposits from the burnt car oil.but probably if it works with used cooking oil, the deposits will be smaller

[@ruthdoyle9085]

Almost anything cast iron should be coated in oil and baked in an oven at 350 degrees for 15 min… imho

[@franciscoassis8255]

Aonde eu compro essa ventoinha?

[@creativeideas5041]

Online shops

[@danielcayengame1042]

You should try with oil dripper instead you could have constant feed of oil and ne need to refill all the time

[@creativeideas5041]

Thank you for advise

[@kousikdas2463]

How much oil required for 1 hour burning

[@creativeideas5041]

500ml

[@gentlelove]

Why the pipes? Shalom you're loved 💔

[@308dad8]

So the oil is just used like an oil lamp or something? The burner is just an air supply? I thought the oil would be pressurized or at least continuously fed and through the burner and burn like any other fuel. Looks like you just threw oil in a rocket stove and hoped that paper and sticks would eventually ignite it.

[@ILoveBeautifulWomen2]

You should explain in detail all the parts and what each part is for. Music playing in the background is BS

[@kylelisavinson2269]

Plus stretching 15 minute video into 40

[@creativeideas5041]

THANK you for watching

[@creativeideas5041]

Thank you for visiting

[@anibalpereira3411]

Very simple to cook

[@creativeideas5041]

Thanks a lot

[@renielverguevarra9790]

​😊😊

[@renielverguevarra9790]

​

[@renielverguevarra9790]

​

[@goldenworld47]

No 1 is best

[@creativeideas5041]

Try it 👌

[@gaz1tinsley]

I had to turn it orff because the muzak was shite and soe were the diy technics !

[@curtistucker8059]

Apparently these guys never heard of whole Saws.

[@creativeideas5041]

Thank you for watching

[@erniederksen3684]

hole saws

[@acesup5845]

They're using half saws instead... not as efficient as a "Whole" saw though. 🤣🤣

[@jayahay6347]

What is the milage (working duration ) of the one litter used oil? Please reply me. 🙏🙏🙏🎉🎉

[@deryusGeneration]

a primeira ja é uma fraude ele ta usando gás no cano de baixo, a proposito todos estão recebendo gás , ou seja fraude em todas 😁🤣🤣🤣🤣🤣🤣🤣

[@BeyondInvestigation]

It appears the oil supply valve is turned off.... So where is the fuel coming from?

[@creativeideas5041]

there is only the right level of oil that can be put inside the chamber and it takes 10 to 15 minutes

[@dshow1658]

What cutoff wheel skills

[@creativeideas5041]

Thank you

[@jomovlog2597]

amazing

[@creativeideas5041]

Glad you think so!

[@gangliu2273]

How to clean the last unburned residue in the furnace?

[@creativeideas5041]

there is almost nothing left inside if the fire is used up, so there is no need to clean it,

[@cebuautomechaniko6903]

Unsafe pa rin, try mo patakan tubig kung ano reaction.ng apoy, mas maganda jan kung may takip ang chamber o ang burner kasi .magliliyab yan pag napatakn ng tubig

[@temjaiwannasa4816]

Wow

[@creativeideas5041]

Thank you for watching ☺️

[@user-fr3wp8lt5y]

Valeu

[@creativeideas5041]

Thanks for watching

[@georgebutcher6320]

New Glove Trend ?

[@creativeideas5041]

😅 thank you for watching

[@ricviloria]

To all viewers, please be careful in doing such projects using an old flammable gas tank material. The residual gas inside might explode when spark is produced during cutting.

[@stickyfox]

I usually fill them with water before drilling/grinding just to be safe.

[@vulcano911]

Luckily he's wearing his safety gloves.

[@BebotBillate-ed1nx]

Ggo k pla iba pnkta s. Lrawan. Tpos ngttabas kpa

[@christopheryerro6738]

Hello boss magkano pagawa order ako

[@raffyca2844]

Whitch used oil you use idol? Cooking oil or car used oil?

[@creativeideas5041]

Both

[@catoelip]

Intersted

[@creativeideas5041]

Great 👍

[@alfonzo907]

THUMBS DOWN ! NO EXPLANATION !!!!!!!!!!!!!!!!!

[@daniloraymundo3285]

Boss Anu taas ng chamber mula sa flooring

[@creativeideas5041]

9 cm my friend

[@robert4027]

nice gloves lol

[@edwinculanag3054]

Bilhin ko nalang gawsa mo brod

[@creativeideas5041]

Thank you my friend

[@isidrobelamidejr2753]

Sinapat ng inyong trabaho

[@geoffisaac3511]

What's the point in having those gloves on nothing left of them

[@creativeideas5041]

I don't have a budget yet so I'm just persevering first

[@fjbtrump24]

cant handle the music

[@creativeideas5041]

Thank you for watching next time I will low the volume of the music

[@jhasphercatumber7879]

whats the point , still using woods?

[@creativeideas5041]

For me much better mix with woods because it is natural burning mechanism

[@sharijuing2441]

Nice

[@creativeideas5041]

Thanks

[@user-ce8kp2kc8d]

Соблюдайте технику безопасности

[@creativeideas5041]

Thank you for the tips

[@nelmarjuarez1757]

Gayahin ko ito lodz pramis

[@creativeideas5041]

I'm glad you like it ☺️

[@danielyoung3083]

first one will crack up and fall apart from heating an cooling repeatedly like a road. bad idea

[@BabamaleKamaldeen-vd3cx]

Please I need text to corroborates my knowledge on this waste oil frabrication

[@creativeideas5041]

Thank you for visiting

[@suwarno8264]

Da buat flower dari bawah ke aras ini flower dari samping pake t dear ada gk beda kerja flower daruuai bawah keatas dan apa beda flower dari sampin8ng

[@creativeideas5041]

T is good, used 3mm & 1.5mm

[@user-lq2kn6fu2n]

Smells good😂😂😂

[@azaz-jx2ud]

돈 주고 그냥 하나 사라!

[@user-zu4bg3df5d]

Wala po bang amoy na oil ang usok nito ?

[@creativeideas5041]

Nothing,

[@BabamaleKamaldeen-vd3cx]

What type of oil waste ? It is that of gas?

[@creativeideas5041]

Used engine oil

[@arzobsilap927]

​@@creativeideas5041is it safe or carcinogenic?

[@tampakanbfp1235]

Benta mo #1

[@creativeideas5041]

ithank you for watching

[@NorlitoSenorin]

Magkano naman po kung magpapagawa ?

[@creativeideas5041]

For content only my friend

[@jessalonavlog4309]

That's too much work

[@creativeideas5041]

Thank you

[@elizabethjuan-5042]

Nagbebenta kaba sir ng gawa mong de use oil tnx sa reply at magkano poh.

[@creativeideas5041]

Thank you for like the project but all my project is for giving ideas

[@jamesloma36]

Sadly, burning used oil is carcinogenic.

[@hitop2365]

No gaurd on the grinder, holding the workpiece that he's cutting, health & safety isnt big on this guy's agenda.

[@user-vx6yo5sz3u]

Very poor invention. Very hard to clean after used

[@arlypaulmigueldamuy5221]

1 is too heavy.

[@creativeideas5041]

Thanks for watching

[@chasbader]

Curious where you get the fan and control shown at th-cam.com/video/WpTbszU6NOU/w-d-xo.html

[@creativeideas5041]

you can buy online like amazon/shopee/lazada

[@RafaelManzano-sr4xt]

Ok

[@ManuetoPelayo-sw3cr]

bosing poyding bumiki Po ? magkano Po bayan?

[@creativeideas5041]

No

[@christophehiro7950]

La première vidéo une connerie pour moi y’a un souffleur pour alimenter le feu pourquoi ne l avoir pas montrer