You are so smart. I watch alot of different videos like this. And I am always so blown away at the things you create. The blade holder is absolutely the best thing I have ever seen. Definitely using that lil gem. But this alcohol stove is really cool. I only wish I could have been this smart back when I was younger. I can make things to assist on whatever I am working on but nothing at the level you share. Thank you for these videos. I enjoy watching them. Even with the no talking. Makes you pay attention lol.
Если делать на бензине для зажигалок, то горит как газ синим пламенем, только отверстия нужно сверлить сверлом 0,5 мм и стекловатой набивать горелку. Лайк!
Very nice, this is the same principle as my old "Turm Sport" backpacker's stove from the 1950's that still works great to this day. I've built some like this and done some experimentation as well. I discovered that the bigger the circumference of the burner, the larger the flames are likely to be because more alcohol will be vaporized in the tube. Also, a small round piece of thin steel on top of the primer dish will reflect some more heat down to the vaporizer tube, increasing the flame size. Pure (denatured) alcohol works best, there is no water in it...but it's more expensive. It's also good practice to burn off any remaining alcohol in the tube when you're done using it and ready to store it for awhile just to prevent any corrosion, especially with the cheaper alcohol and using aluminum instead of brass tube. Also, cork seals made from automobile gaskets work great for alcohol. It sneaks right past rubber seals unless they are absolutely precision fit, but cork will swell up when it gets wet with the alcohol, and solves that problem. Cool video, thank you for sharing this! Peace :)
Отлично сделано. Предлагаю убрать металлическую ёмкость и добавить шланг с капельницей, чтобы регулировать и перекрывать подачу спирта, и чтобы было компактно и не ломалось
A small suggestion. When drawing something through a tube try blowing or sucking a length of stout cotton through the tube and tie it to your wick. You can then pull it through easily. Cheers on an interesting video.
Assembly of burner element as shown at 8:15 requires a tool of the right diameter with close tolerances, and still risks cracking or deformation during use. You can utilize thermal expansion to easily slip one over the other, by cooling one half and heating the other immediately prior to the final fit.
Really Great video thanks. I noted in another channel, making a different alcohol burner, that they packed the reservoir with a wicking material so that if the stove gets knocked over you don't get a puddle of fuel released. Of course, that would make it more difficult to enjoy the reservoir of you don't burn all the fuel but is with considering.
Cher ami, il y a une élégance délicieuse dans la conception et la construction de votre poêle en ferraille. Je suis heureux d'avoir regardé la vidéo en entier. Je me suis abonné. pierre
Хорошая горелочка, в принципе для любых горючих жидкостей в качестве топлива. Но! Основной недочет - очень непросто регулировать подачу топлива. Фитильная схема, в этом плане проще. А так - решпект, приятель. Руки и голова у тебя растут откуда нужно.
Also a clean finger with saliva or liquid soap works wonders to get a smooth professional bead of silicone instead of a stick. To get the silicone off get a small bowl of plain cooking flour and go outside and pretend you are soaping yuour hands to wash them it will pick up the flour and make a silicone dough and fall right off your hands leaving them all soft and clean :)
I like your design, and will see if my son wants to make one today. It is nice to use materials already on hand! The only thing I'd like changed is to have the fuel tank removable for packing, but I don't have any ideas that would also be simple. Thanks for posting!
Lacquer thinner would be quicker than sandpaper and wouldn't leave scratches. And alcohol is a rubber solvent. That silicone patch won't last. JB Weld instead. But, all said that's a great-looking stove. Well done.
Foi o q eu pensei, achei muito perigoso. pois aqui na minha cidade tem uma família ao qual todos tem uma cicatriz proveniente de uma garrafa de álcool, a Mae delas estavam usando o álcool para cozinhar e nisso não sei bem a dinâmica do ocorrido, a garrafa explodiu queimando todos q estavam próximos, álcool é muito inflamável.
I always just love it when the videos include spinning something over in your hand like it preforms a miracle! seriously why don’t you just explain what it is that you are doing and why!
Thanks for the great idea of a fixture to cut a thin-walled metal cylinder smoothly and safely! It's much better, neater and faster than to mark with a marker, punch holes and then cut with scissors, as is done in many videos on a similar topic. Plus, the scissors, if they are not metal scissors, will have to be sharpened. That's a good way to do it. Truth be told, though, I would still work with thin cloth gloves to protect my hands from accidental cutting.
ящик с железками, а потом и обстановка в гараже навеяли что-то близкое, знакомое, а не заграничное, ну, а затем футболка всё поставила на свои места - наш человек !
Dude you just make a badass tiki torch too nice 💯 instead of alcohol use that bug repellent stuff for tiki torch an set the sucker on a table an your good
Segui as tuas instruções no video, fiz, não vaza nada, pinga dentro certinho, mas o fogo não pega de jeito nenhum através dos furos. Acaba o fogo da superfície e já era... Inclusive completei ali de álcool para testar e não adianta. Mas o projeto é show. Vou refazer hoje novamente...
Instead of using an o ring inside the alcohol container, put a bead of silicone on the inside of the hole before softly pushing the bolt in behind it and letting it set and cure before continuing that way you will get an alcohol tight seal.
Very nice. I liked the Methodical way of work. This design is nice, yet two disadvantages: its fix and place consuming, good for an off grid cabin but not for a pack. Id suggest a flex tube after a bit of aluminum. Also the side connection needs to be better designed. Ide suggest a double sided connection.
legal. mas no acampamento eu preferia só cortar meia lata de refri, com canivete. Colocava em uma pequena vala feita com a mão (não pode ser buraco pq se não abafa e apaga o fogo). Enchia de álcool e a panela em cima.
для домашней любительской химлаборатории штука годная, но в рюкзаке по горамлесам такую долго не потаскаешь (((( её главное достоинство - очень легкая, но недостатков далеко не один: очень нежная, требуется какой нибудь жёсткий футляр, чтобы не повредить емкости и соединения, спирт сводит на нет её весовые преимущества, таскать его придётся отдельно занимая дополнительный объем ... тем более он может кончиться раньше, чем дело дойдёт до чая ((( ... в плане универсальности и функциональности пока выигрывает обыкновенная щепочница (к сожалению проигрывая в копоти))). А за светлый ум и нежные мужские руки, однозначно - лайк !)))
errinho no projeto, o anel de vedação nunca deve estar do lado do liquido, ou seja, deve estar para o lado de fora, no caso o tubo deveria ter rosca por fora com porca e anel de borracha, oring, então não terá vazamentos, em casos de duvidas, ver normas de colocar flange de caixa de agua. Fica a dica.
you should elevate the fuel tank and bend some metal around the burner to work as a windshield. good design! very simple and made with rudimentary tools, anyone can make this.
A chama fica muito amarelada e deixa as panelas muito preta, coloque um cilindro dentro da camara, isso faz com que a chama fique mais controlada, economiza mais alcool e o fogo fica quase 100% azul. bem perto do que seria o do fogao a gás. Eu ia fazer um video ensinando fazer ele, talvez essa semana
@@netoneres6485 Tá duvidando? Vai ter o vídeo ainda lá no meu canal, não tive tempo ainda de gravar. Ja passei 1 ano e meio cozinhando com fogareiro caseiro a álcool
@@deivisonlima2228 um q vc utiliza apenas uma latinha de ervilha, vc serra ela ao meio, deixando a parte de baixo 1,5 cm mais curta, a outra parte interna vc vai fazendo chanfros como se fosse uma sanfona e encaixa dentro, no canal o Takuya ele mostra vários desse tipo👍
If you used a larger diameter reservoir you could increase burn time. With a longer burn time it can be used as a room heater. Maybe one of those radiant steel or clay pot designs. Maybe even use steel and silver solder it together for increased durability.
O-rings on BOTH SIDES of fitting, especially when the pipe is straight, but the reservoir is slightly curved. Also, thread outside of pipe from just before it goes into the burner, and put a nut and silicone rubber ring in before closing the burner (the right size nut will wedge in the burner, and won't turn.), the thread a nut onto the tube, then attach to the burner. Tighten outside nut to compress silicone o-ring and seal it.
thank for this good video. i wish video's creator have a spirit for making new video and for viewer that read this comment i hope all of you have a good day.
Это хорошо, что напомнили! В Советском Союзе, это назывался керогаз! И работал он на керосине. Ещё моя бабушка на нем готовила!
Thank you for sharing your skills with us , some people don't realize what a blessing it is for others to share their knowledge.
Amem
top
Right if you’re deaf this is the video for you!
@@franfran9205 1❤
Супер идея 😅
You are so smart. I watch alot of different videos like this. And I am always so blown away at the things you create. The blade holder is absolutely the best thing I have ever seen. Definitely using that lil gem. But this alcohol stove is really cool. I only wish I could have been this smart back when I was younger. I can make things to assist on whatever I am working on but nothing at the level you share. Thank you for these videos. I enjoy watching them. Even with the no talking. Makes you pay attention lol.
Если делать на бензине для зажигалок, то горит как газ синим пламенем, только отверстия нужно сверлить сверлом 0,5 мм и стекловатой набивать горелку. Лайк!
I'm so happy to see people still building, inviting and improving alcohol stoves. Nice build!
Very nice, this is the same principle as my old "Turm Sport" backpacker's stove from the 1950's that still works great to this day. I've built some like this and done some experimentation as well. I discovered that the bigger the circumference of the burner, the larger the flames are likely to be because more alcohol will be vaporized in the tube. Also, a small round piece of thin steel on top of the primer dish will reflect some more heat down to the vaporizer tube, increasing the flame size. Pure (denatured) alcohol works best, there is no water in it...but it's more expensive. It's also good practice to burn off any remaining alcohol in the tube when you're done using it and ready to store it for awhile just to prevent any corrosion, especially with the cheaper alcohol and using aluminum instead of brass tube. Also, cork seals made from automobile gaskets work great for alcohol. It sneaks right past rubber seals unless they are absolutely precision fit, but cork will swell up when it gets wet with the alcohol, and solves that problem. Cool video, thank you for sharing this! Peace :)
The tube is filled with "wick" tho.. how to burn the remaining alcohol?
Il n'est pas nocif à santé?!
ok
ok
@@arifsheikh1900 Psssh...I reported you fake sheikh and your fake account. I see you haven't grown up one bit and you're still web stalking me huh?
Congratulations, this comes in handy to improvise in tents, and get out of trouble. From Argentina a big greeting.
Wouldn’t use in a tent flame 🔥 oooooooh wooooof
Отлично сделано. Предлагаю убрать металлическую ёмкость и добавить шланг с капельницей, чтобы регулировать и перекрывать подачу спирта, и чтобы было компактно и не ломалось
Великое изобретение кирогаза ! Браво! Бисс!
"Керогаза". Бесполезное, как обычно.
Who wants to bet this artist was using two car batteries and jumper cable welding rig, just joking he's done a great job
kkkkkk
His work is extraordinary. Good luck for the future
這是我看過最有創意的手工酒精爐
謝謝你的分享 !
A small suggestion. When drawing something through a tube try blowing or sucking a length of stout cotton through the tube and tie it to your wick. You can then pull it through easily. Cheers on an interesting video.
Assembly of burner element as shown at 8:15 requires a tool of the right diameter with close tolerances, and still risks cracking or deformation during use. You can utilize thermal expansion to easily slip one over the other, by cooling one half and heating the other immediately prior to the final fit.
Great job 👍🏼. That's a great project to get the kids out of the basement. And learn that hands and fingers are not only to play video games 😂
New ideas model (konstruksi baru antara tabung dan kompor) nice nice!
Really Great video thanks. I noted in another channel, making a different alcohol burner, that they packed the reservoir with a wicking material so that if the stove gets knocked over you don't get a puddle of fuel released. Of course, that would make it more difficult to enjoy the reservoir of you don't burn all the fuel but is with considering.
And when the stove is not in use, you can use the base to repel vampires !!
kkkkkkkkkkkkkkkkkkk
JAJAJAJAA!!!!
The Holy Stovemaster comes ( Columbia Pictures presents)
When Constantine goes camping..🤣🤣🤣
Perfect for some horror campfire stories
Cher ami, il y a une élégance délicieuse dans la conception et la construction de votre poêle en ferraille. Je suis heureux d'avoir regardé la vidéo en entier. Je me suis abonné. pierre
Хорошая горелочка, в принципе для любых горючих жидкостей в качестве топлива. Но! Основной недочет - очень непросто регулировать подачу топлива. Фитильная схема, в этом плане проще. А так - решпект, приятель. Руки и голова у тебя растут откуда нужно.
Да и они были на керосине,, лет 30 назад ещё были в продаже.
Какая это горелка, очередная спиртовка, керосин, бензин коптить дико будут, а спирт (самогон) ещё надо перегнать, это самое неактуальное
A valve would be a very cool addition. Awesome vid
Cool little stove. Glad you finally found rest of the drill..
;-D ;-D ;-D
The best of it. You can fill your fuel back into your container. Nice stove. Lovit. ♥
Also a clean finger with saliva or liquid soap works wonders to get a smooth professional bead of silicone instead of a stick. To get the silicone off get a small bowl of plain cooking flour and go outside and pretend you are soaping yuour hands to wash them it will pick up the flour and make a silicone dough and fall right off your hands leaving them all soft and clean :)
Woow very clever! Very nice invention.
I like your design, and will see if my son wants to make one today. It is nice to use materials already on hand!
The only thing I'd like changed is to have the fuel tank removable for packing, but I don't have any ideas that would also be simple.
Thanks for posting!
Thank you very much for posting and thank you for sharing your work.
Esta muy bonita la cocina de alcohol . Un abrazo
Nice build thanks from the Philippines 🇵🇭
Ja fiz various fogareiros a álcool. Mas nunca com alimentador remoto. gostei muito da idéia assim da para cozinhar até coisas demoradas. Parabéns.
verdade em nunca vi isso melhor ideia ja de fogareiro
Lacquer thinner would be quicker than sandpaper and wouldn't leave scratches. And alcohol is a rubber solvent. That silicone patch won't last. JB Weld instead. But, all said that's a great-looking stove. Well done.
Top demais ...parabéns ...eu só colocaria o recipiente com combustível um pouco mais distante para ficar mais seguro ...
Foi o q eu pensei, achei muito perigoso. pois aqui na minha cidade tem uma família ao qual todos tem uma cicatriz proveniente de uma garrafa de álcool, a Mae delas estavam usando o álcool para cozinhar e nisso não sei bem a dinâmica do ocorrido, a garrafa explodiu queimando todos q estavam próximos, álcool é muito inflamável.
excellent idea I will tell my husband to do it for me, congratulations
Muito bom é é até bonito visualmente .
Sugiro um registro para controle dessa chama até por que o importante é a economia de combustível.
Спасибо, что пока снимал, как пользуешься сваркой, всем зрителям глаза повыжигал." Зайчиков" нахватались
Обыкновенный примус, годов СССР. Такой был в каждом доме.
Согласен, но примус крепче и надежнее.
I always just love it when the videos include spinning something over in your hand like it preforms a miracle! seriously why don’t you just explain what it is that you are doing and why!
a few tweaks a you have a perfect product. thanks for sharing your design.
-
Excelente!
Un saludo desde Bogotá Colombia! 🇨🇴
Eu achei genial ,muito bom mesmo, e o melhor é que não desperdiça o alcool
ลฃฃฃ
Thanks for the great idea of a fixture to cut a thin-walled metal cylinder smoothly and safely! It's much better, neater and faster than to mark with a marker, punch holes and then cut with scissors, as is done in many videos on a similar topic. Plus, the scissors, if they are not metal scissors, will have to be sharpened. That's a good way to do it. Truth be told, though, I would still work with thin cloth gloves to protect my hands from accidental cutting.
Aparentemente perfeito. Vou tentar fazer é depois filmo e envio o vídeo é te dou a nota
New friend, watching from Manila, Philippines👍👍👍
Waiting for new gun making video.
By the way thanks for comeing back. Take lost of love.💟💟
Best of luck.
The gun vids are gone, youtube deleted it.
ящик с железками, а потом и обстановка в гараже навеяли что-то близкое, знакомое, а не заграничное, ну, а затем футболка всё поставила на свои места - наш человек !
Ótima ideia para reciclar utensílios domésticos.
Wow it's beautiful.... i knew the small camping stove already, but you pushed the design further, brilliant :)
Muito trabalhoso e pouco eficiente , e pouco pratico . Mas bem bonito.
rubber ring may work against the flat surface. but the can is curved.
Sensacional. Quanto dura á cada carga de combustível
Amazing what you can do with what you have at home
Can I also use oil if no ethanol appreciated BIG UP (South Africa)God bless
I appreciate all that cool cleverness!
о! Ты примус придумал! Молодец! ))))
Примус поддпалением горючку подаёт, а это керогаз.
...my hands cringe from the site of no gloves being used....GREAT Build by the way.. 👍
Thanks for another great video, keep up the good work and I hope to see another great one soon.
,
Dude you just make a badass tiki torch too nice 💯 instead of alcohol use that bug repellent stuff for tiki torch an set the sucker on a table an your good
Projeto muito legal. Parabéns! Obrigado por compartilhar essa man.
O amigo estou fazendo uma morsa gigante para meu uso com sucata, vai lá ver quando estiver tempo 👍✌
wow
Segui as tuas instruções no video, fiz, não vaza nada, pinga dentro certinho, mas o fogo não pega de jeito nenhum através dos furos. Acaba o fogo da superfície e já era... Inclusive completei ali de álcool para testar e não adianta. Mas o projeto é show. Vou refazer hoje novamente...
Use alcool de posto de combustível amigo… esse alcool de mercado ele queima por pouco tempo e logo apaga… o de posto dará certo! Tenta depois me fala
Foguista acompanho desde os primeiros videos, pena que excluiu alguns mesmo assim sempre se mostrando um cara genial, sucesso irmao.
Instead of using an o ring inside the alcohol container, put a bead of silicone on the inside of the hole before softly pushing the bolt in behind it and letting it set and cure before continuing that way you will get an alcohol tight seal.
Does it keep demons away? Or summon them? Seriously nice job on the build. You put a lot of work into it. Very resourceful. Dig it.
It will burn evil spirits, also known as methanol.
LOL ikr?
Si te ataca un vampiro podes hacer una cruz lanzallamas jaja... muy bueno el video 😁
И бочку 500 литровую из под «Квас»(а) к ней
Маde in СССР ....👍🏻
💋🤣
Very nice. I liked the Methodical way of work.
This design is nice, yet two disadvantages: its fix and place consuming, good for an off grid cabin but not for a pack. Id suggest a flex tube after a bit of aluminum.
Also the side connection needs to be better designed. Ide suggest a double sided connection.
Brilliant use of household items and tools.
buena idea, me pregunto si podria ponersele un regulador para la llama, asi como unas cocinas de alcohol comerciales que he visto por ahi felicidades
legal. mas no acampamento eu preferia só cortar meia lata de refri, com canivete. Colocava em uma pequena vala feita com a mão (não pode ser buraco pq se não abafa e apaga o fogo). Enchia de álcool e a panela em cima.
Dang this is awesome and detailed I appreciate this
Vídeo prende do início ao fim de tão interessante. Muita inteligência.
O amigo estou fazendo uma morsa gigante para meu uso com sucata, vai lá ver quando estiver tempo 👍✌
для домашней любительской химлаборатории штука годная, но в рюкзаке по горамлесам такую долго не потаскаешь (((( её главное достоинство - очень легкая, но недостатков далеко не один: очень нежная, требуется какой нибудь жёсткий футляр, чтобы не повредить емкости и соединения, спирт сводит на нет её весовые преимущества, таскать его придётся отдельно занимая дополнительный объем ... тем более он может кончиться раньше, чем дело дойдёт до чая ((( ... в плане универсальности и функциональности пока выигрывает обыкновенная щепочница (к сожалению проигрывая в копоти))). А за светлый ум и нежные мужские руки, однозначно - лайк !)))
Parabéns..... " assim caminha a humanidade ".
Criar é preciso......
O amigo estou fazendo uma morsa gigante para meu uso com sucata, vai lá ver quando estiver tempo 👍✌
If you can glue a rubber gasket to the reservoir lid and add a valve at top of the lid you can actually leave alcohol in the cooker once finished.
errinho no projeto, o anel de vedação nunca deve estar do lado do liquido, ou seja, deve estar para o lado de fora, no caso o tubo deveria ter rosca por fora com porca e anel de borracha, oring, então não terá vazamentos, em casos de duvidas, ver normas de colocar flange de caixa de agua.
Fica a dica.
Aí sim da pra esquentar umas marmitas no serviço 😄🤭✌️
Interessante mas não possui as 3 qualidades básicas para camping:
❎Pratico
❎ Compacto
❎ Seguro.
you should elevate the fuel tank and bend some metal around the burner to work as a windshield.
good design! very simple and made with rudimentary tools, anyone can make this.
I'll named it, the Holy Stove 🙏👍😀
To make some StroGodnoff
The backcountry camping community will be quite cross.
..as it is bestoved upon you.
I think it's brilliant, I don't understand why so many thumbs down, can any of those share a video with a better version using these materials?
I see zero thumps down and 35K thump up. Can any one explain?
@@sheikhiftikharali TH-cam new policy, you won´t see thumbs down counter anymore, check any vid
A chama fica muito amarelada e deixa as panelas muito preta, coloque um cilindro dentro da camara, isso faz com que a chama fique mais controlada, economiza mais alcool e o fogo fica quase 100% azul. bem perto do que seria o do fogao a gás. Eu ia fazer um video ensinando fazer ele, talvez essa semana
Não entendi! cilindro dentro da câmara? gostaria de saber mais, se puder explicar com detalhes , agradeço.
@@MsApollo9 vou fazer um vídeo ensinando, isso é simples e barato de fazer, na verdade até grátis com material reciclável
ONDE TU VIU A CHAMA AMARELA? Hahahaha,
😏😀
@@netoneres6485 Tá duvidando? Vai ter o vídeo ainda lá no meu canal, não tive tempo ainda de gravar. Ja passei 1 ano e meio cozinhando com fogareiro caseiro a álcool
Exelente, Gracias por compartir esto me va a servir mucho en mi taller.
Excelente e olha que tenho todo tipo de fogareiro menos esse auto alimentado👍
Qual vc indica?
Que seja fácil de fazer e bem prático para acampamento
@@deivisonlima2228 um q vc utiliza apenas uma latinha de ervilha, vc serra ela ao meio, deixando a parte de baixo 1,5 cm mais curta, a outra parte interna vc vai fazendo chanfros como se fosse uma sanfona e encaixa dentro, no canal o Takuya ele mostra vários desse tipo👍
@@brucelee-rb7zv obrigado
Estou estou indo agora lá verificar
Valeu
blz tbm vou
Nice idea 👍
Very nice I thouk too !!!
Will u sell this?
Enfiiiiim, um canal nesse nivel full BR
All good except for the principles of hydrostatic pressure pushing the fuel source up the burner
Not bad, Its an interesting upgrade to the penny stove, though I would put a cut off valve halfway along the tube to switch off the fuel flow
Awesome. Can this also burn other types of fuel like kerosene or gasoline?
I would like to see a video of that.
Que capricho! Muito bom!
If you used a larger diameter reservoir you could increase burn time.
With a longer burn time it can be used as a room heater.
Maybe one of those radiant steel or clay pot designs.
Maybe even use steel and silver solder it together for increased durability.
Parabéns . Idéia muito legal. Mas nunca abasteça o reservatório com a chama acesa : é perigoso a chama se alastrar .
Principalmente se a pessoa for desastrosa, e deixar tombar o litro de álcool, ou o próprio fogareiro!!!
O-rings on BOTH SIDES of fitting, especially when the pipe is straight, but the reservoir is slightly curved. Also, thread outside of pipe from just before it goes into the burner, and put a nut and silicone rubber ring in before closing the burner (the right size nut will wedge in the burner, and won't turn.), the thread a nut onto the tube, then attach to the burner. Tighten outside nut to compress silicone o-ring and seal it.
Well done, but what kind of fuel is used to set fire to a fire?
wow
@@fuzonefuzone4691 спирт
Comprava fácil! Muito bacana!
Good invention keep it up 💗
O amigo estou fazendo uma morsa gigante para meu uso com sucata, vai lá ver quando estiver tempo 👍✌
Muito Bom ! Super útil !
thank for this good video.
i wish video's creator have a spirit for making new video and for viewer that read this comment
i hope all of you have a good day.
we have the solid fuel tablet on sale c/w stove remote use
Faxztsccssscsg✌️
Tente fazer um 👍
Natural sound.
use alcohol to remove silicone... you're using silicone to seal alcohol leak
why not use jb weld
wow ganda ng idea good job