0:17 There is. Never be so sure my friend. I had the the same error out of nowhere, I simply disconnected the HDD, cleaned it up carefully and pluged it back in and it woked as it used to be with no data loss. Here's my process if anyone is interested: I have 1 SSD as the main drive, a new HDD and a 14 year old HDD archive I went to "My Computer" and the old HDD was not there, went to disc manager and it was listed there as Not initialized like in the video and it asked me if I want to do perform this or that (I forgot what it was) I closed it, turned off my pc, unplugged it from the outlet, let it sit for a couple of minutes. The pc was very dusty so I unplugged the GPU and all 3 drives (please be very careful handling the drives specially the HDDs and specially old ones as they are fragile components) Used a duster and carefully dusted the pc. I cleaned the GPU and drives with a soft makeup brush very carefully. I plugged everything back in making sure the connections are in place. Powered the pc and under the windows startup logo it was performing some "fixing drive something something" took about 5 minutes and it booted as usual and the old HDD was there with all files intact, thank God! Now I'm going to back up the heck out of it. Good luck to everyone.
Yooo I had the same issue as this guy. All of the software fixes I've been trying have not been working and I haven't had access to my SSD for like a month now. I tried these steps that you recommended and it worked. I didn't even have to clean it. I just took out the cables and put them in firmer I think. If you have tried everything and it's not working, this is most likely the issue. Big kudos to bnadem who recommended this.
Thanks man, I have an SSD on my notebook that wasn't working (disk unknown/disabled). I unplugged it, used WD40 to clean the contact and wiped out the excess with cotton, did some plug/unplug to clean the other side of connection and then cleaned with cotton again. It worked just fine.
@falahp6320 possibility is there.. use method 3 of this video: Recover data after formatting harddisk th-cam.com/video/f6AeTX1RB8A/w-d-xo.html If it can read your data you will get back your data
You are a saviourrr. My SSD was not working so i cleaned the disk by the CLEAN command and didnt knew what to do then i found ur tutorial and i foolowed ur steps after the CLEAN command and its WORKING NOW ... Ty a lottt
1:19 can you tell me what to do since after i write chkdsk thing for my D drive it says cannot open volume for direct access. my hard drive also for some reason dissapeared from my devices and drives page.
edit: I see elsewhere in the comments that are anything similar to this that you state the drive is damaged - so absolutely nothing that can be done to recover any data? after "list disk" (2:10) my disk shows "0 B" not 8TB as it should. Back story: external drive that after experiencing a power outage shows as "unknown not initialized" in Disk Management. It does not show up at all in Devices and Drives within File Explorer (1:03). The drive used to be labeled as Z: and when I attempt to do "chkdsk" (1:00) it is obviously not finding it. HDD powers on, spins, but isn't recognized by anything other than Disk Management and upon initial scan there is prompts me to initialize the disk and set up MBR or GPT which I'm reluctant to do as I do not want to make the data recovery process more difficult. Thanks in advance for any input from anyone or the OP 🤘
Try to use easeus data recovery.. it’s free to use upto 2 gb Just use the free version to make sure that it recovered the data.. and if it worked you can go with the paid version
i have the same problem with my M.2 SSD - suddenly stopped working - not showing in Bios oder Disks but in Device Manager - and also shows 0 B instead of 1 TB. 2 years and 1 month old, just out of the warranty window :3
when i type "create partition primary" i got this message "DiskPart has encountered an error: The request failed due to a fatal device hardware error. See the System Event Log for more information." i need help please
Hi, I performed the "clean" command via CLI to format the disk. When I try "convert gpt" it says "Error in DiskPart: Illegal function. For more information, see the system event log." Same goes for "create partition primary". Sounds like a Hardware issue to me, any ideas how to fix it?
After I try to clean the disk, I get this error message: DiskPart has encountered an error: A device which does not exist was specified. See the System Event Log for more information. What do I do?
Every video I’ve watched has the same steps and none worked for me, I gave up and completely shut off my pc unplugged the drive and plugged it back in and it started working again.
Hello. I have a serious question for you. I have experienced a STRANGE HDD disk problem. I turned on my two external 2TB WDs. Hard drives to install (toshiba bluetooth stack) drives something that worked well. The machine was restarted and usb bluetooth worked fine. Then I had to access the external hdd to archive something. I couldn't get in for some strange reason and it said RAW on the disk in file explorer. I restarted the machine and win11 did a short disk repair. Then the disk was back, except that I no longer had user access to the disk. i tried to give it this but in the middle of this process win11 reported that there was an error with the disk and could not continue. I tried linux boot usb to try to access and read and copy from hdd but didn't get full permission to copy. Then I tried the Android TV box I had (x96 air) which gave me 100% access to do what I wanted. But the problem was USB2 which is extremely slow and I never got over 10mb/s read speed. Anyone know why this happened to me? why do I suddenly have to have user access. Shouldn't an external hdd work without user access? bitlocker is off. I am using win11 23h2 My HDD Samsung 2TB HD204UI
@@LotusGeek It's not that simple. Nothing wrong with the usb cable. And no new bios update for me. Don't you think that what happened with my EXTERNAL HDD. was a little weird? Strange that it worked flawlessly in Androud. The ones I find strange is the way the error occurred. At first win11 file explorer rapped the disk as RAW. and then it was automatically repaired by win 11 but now win11 requires user access something win11 is unable to give since win11 comes up with an error message when I tried. But android is able to read the disk without any problems. All other external USB HDDs work fine. Yes, I have tried mounting the HDD inside the computer.
Yes seems strange.. try to connect it to another pc .. or check for bad sectors in hdd Open cmd and type in Chkdsk c: /f /r /x Where c: is the drive letter of your damaged disk
Tried Minitool ....but it doesn't allow me to right click on problematic dis and select "intialize to mbr disc"....Also it shows (Bad disk) on the side instead of unallocated. How do I go about this? Is there another way?
Thank you so much Brother , I had a pendrive 64Gb , was facing this issue since 2021 , and I thought it's not going to fix . But finally I landed on this video really man thanks a lot . Thank you so much for saving my Pendrive. Thank you so much 🙏
hello.... in my case drive letter not assign to hard disk and it not showing in my computer also. so i cannot assign letter to it. please resolve my problem.
Hy there, i just watched your video hoping to find a solution for my problem but unfortunately i haven`t been succesfull. I bought on Amazon Ugreen CM578 M.2 NVMe Hard Drive Enclosure in which i installed fully working SSD with 512Gb of space. The Ugreen Enclosure with SSD is recognised from the PC but not usable, i watched your video from start till the end and i did everything you explained but nothing happened. i have installed Erase US Partition manager just like Mini Tool Partition Wizard and on both software my "Disc 2" is recognised but somehow i can`t do anything,i can`t format,optimise or anything on that disc and if i take SSD out of the enclosure and install it directly into a PC the same SSD is recognised and fully working. What am i doing wrong, please help :(
I have at home three PC's and it can't be that i'm having same problem on each every one of them, and by reading comments i'm not the only who has this problem.
Will this losing data? I just skip the tutorials months ago and I tried to use this software then everything went backed it up, but second when it came back because of the stupid bsod. I went so mad that I’ve lost everything again, the thing is that lost partition doesn’t not shown since it’s either just a software glitch or hard drive is always a problem. So either way I’m afraid that Im not going to delete the file again. So Im just gonna go ahead and upload my operating system of vhdx to other thing where the files was stored.
I made a Win11 installation USB Flash Drive. Using Diskpart, i made the installed SSD in the laptop the PRIMARY drive. Somewhere along the way, i put the wrong info in Diskpart, and now the SSD is lost! Diskpart cannot find it! How can i get Diskpart to find it? The drive is in the command prompt as X: It is a 512GB SSD. I need it to find it!
Solved! Nothing worked until I disconnected the drive and allowed it to sit for a couple of minutes. And when I reconnected it, it started working again. Thank you.
@LotusGeek Ssd with only c partition in another laptop as windows os tried to use on desktop as external ssd with case. Showing in disk management as Disk1 unknown not initislised and when initalise attempt "the request failed due to a fatal hardware error ". Ssd connected external not showing anything in file explorer. Its reading well in old system . In diskpart list disk ... Its not showing . Device manager showing " diskdrive Jmicron generic SCSI disk device " How to make this ssd work ? Its working In old system where its windows is installed
Try changing the port. Nextly open device manager by right click on start menu and choose device manager Make sure there isn’t any exclamatory sign by subscribing expanding all the drivers
@@LotusGeek not working . can you give me email id ? i will send screenrecord video . it was 100% working m2 nvme ssd on a desktop with wind11 os just c drive . i removed and try tp use that in laptop with its case. case and cables working . but in diskpart its listed as Disk1 0mb 0mb .when try to initialise saying " failed due to fatal hardware error "
@@NakuHDi figured it out Diskpart> List volume (You will see volume number but no letter) Diskpart> select volume (whatever number) Diskpart> assign letter=(whatever letter)
Sorry dear no shop.. if it’s not working you can recover your data. Watch this tutorial and use method 3- Recover data after formatting harddisk th-cam.com/video/f6AeTX1RB8A/w-d-xo.html
0:17 There is. Never be so sure my friend. I had the the same error out of nowhere, I simply disconnected the HDD, cleaned it up carefully and pluged it back in and it woked as it used to be with no data loss.
Here's my process if anyone is interested:
I have 1 SSD as the main drive, a new HDD and a 14 year old HDD archive
I went to "My Computer" and the old HDD was not there, went to disc manager and it was listed there as Not initialized like in the video and it asked me if I want to do perform this or that (I forgot what it was)
I closed it, turned off my pc, unplugged it from the outlet, let it sit for a couple of minutes.
The pc was very dusty so I unplugged the GPU and all 3 drives (please be very careful handling the drives specially the HDDs and specially old ones as they are fragile components)
Used a duster and carefully dusted the pc. I cleaned the GPU and drives with a soft makeup brush very carefully.
I plugged everything back in making sure the connections are in place.
Powered the pc and under the windows startup logo it was performing some "fixing drive something something" took about 5 minutes and it booted as usual and the old HDD was there with all files intact, thank God!
Now I'm going to back up the heck out of it.
Good luck to everyone.
Yooo I had the same issue as this guy. All of the software fixes I've been trying have not been working and I haven't had access to my SSD for like a month now. I tried these steps that you recommended and it worked. I didn't even have to clean it. I just took out the cables and put them in firmer I think. If you have tried everything and it's not working, this is most likely the issue. Big kudos to bnadem who recommended this.
Do I do it with the PC on or off?
keeps saying io error
Thanks man, I have an SSD on my notebook that wasn't working (disk unknown/disabled). I unplugged it, used WD40 to clean the contact and wiped out the excess with cotton, did some plug/unplug to clean the other side of connection and then cleaned with cotton again. It worked just fine.
so its the cable or the motherboars
When I type the command "convert gpt" it says that it has encountered an error "Data error . I get the same error for "convert mbr".
It’s hardware error.. your hdd is failing
Then not possible to recover?@@LotusGeek
@falahp6320 possibility is there.. use method 3 of this video:
Recover data after formatting harddisk
th-cam.com/video/f6AeTX1RB8A/w-d-xo.html
If it can read your data you will get back your data
@@LotusGeek thanks for reply
Always welcome
my hard showing 0 storage in list disk, what i have to do? is there any chance to get back my data?
Yea there are chances. Have a look at this -
Recover data after formatting harddisk
th-cam.com/video/f6AeTX1RB8A/w-d-xo.html
Hi , in my disk management shown disk not initialized but in cmd disk part list disk never appeared the disk, how can i do?
Hardware issue
@@LotusGeekwhat to do then. no fix?
You can recover your data ..
@@LotusGeek how?
@anfas184 Recover data after formatting harddisk
th-cam.com/video/f6AeTX1RB8A/w-d-xo.html
You are a saviourrr. My SSD was not working so i cleaned the disk by the CLEAN command and didnt knew what to do then i found ur tutorial and i foolowed ur steps after the CLEAN command and its WORKING NOW ... Ty a lottt
Happy to help
1:19 can you tell me what to do since after i write chkdsk thing for my D drive it says cannot open volume for direct access. my hard drive also for some reason dissapeared from my devices and drives page.
This will help-
Cannot open volume for direct access chkdsk
th-cam.com/video/mWUrQsnC_y8/w-d-xo.html
Bro, you just saved me a hundred bucks. I can't thank you enough, I've subscribed and liked your video. Thank you very much
Thank you sooo much dear 😊
ahhhh the bots
i search many video on how to fix my unrecognize disk,this video help me a lot to solve the issue..thank you
Glad I could help!
edit: I see elsewhere in the comments that are anything similar to this that you state the drive is damaged - so absolutely nothing that can be done to recover any data?
after "list disk" (2:10) my disk shows "0 B" not 8TB as it should.
Back story: external drive that after experiencing a power outage shows as "unknown not initialized" in Disk Management. It does not show up at all in Devices and Drives within File Explorer (1:03). The drive used to be labeled as Z: and when I attempt to do "chkdsk" (1:00) it is obviously not finding it.
HDD powers on, spins, but isn't recognized by anything other than Disk Management and upon initial scan there is prompts me to initialize the disk and set up MBR or GPT which I'm reluctant to do as I do not want to make the data recovery process more difficult.
Thanks in advance for any input from anyone or the OP 🤘
I have the same issue can uou please tell me how to recover data.
Try to use easeus data recovery.. it’s free to use upto 2 gb
Just use the free version to make sure that it recovered the data.. and if it worked you can go with the paid version
i have the same problem with my M.2 SSD - suddenly stopped working - not showing in Bios oder Disks but in Device Manager - and also shows 0 B instead of 1 TB. 2 years and 1 month old, just out of the warranty window :3
@@LotusGeek please make a video on this one also
I also have the same problem
If already made a video please give the video link
When i wrote convert gpt it's says diskpart has encountered an error: the request could not be performed because of an I/O device error.
So what's the problem pls guide ke
Seems to be hardware fault
when i type "create partition primary"
i got this message "DiskPart has encountered an error: The request failed due to a fatal device hardware error.
See the System Event Log for more information."
i need help please
same..please tag me if anyone have solved it
It’s because it’s hardware fault.. you need to replace hdd
@@LotusGeek all right...but it have any chance to repair?
Take it to repair shop.. hopefully they can recover your data
@@LotusGeek all right..thank you
Hi, I performed the "clean" command via CLI to format the disk. When I try "convert gpt" it says "Error in DiskPart: Illegal function.
For more information, see the system event log." Same goes for "create partition primary". Sounds like a Hardware issue to me, any ideas how to fix it?
Yes if Diskpart is not working it totally a hardware fault
Thanks for your quick reply and confirmation! Only real option would be to go to a shop with it, correct?
Yes better to recover the data using a good software because I don’t think a shop can repair it.. but give it a try
I have disk 1 not initialized and unallocated. It was previously working fine. I can't see it in file explorer and it has no letter assigned to it.
Assign letter in disk management
The only options I see upon right clicking disk 1 in disk management are initialize disk, offline, properties, and help.
After I try to clean the disk, I get this error message: DiskPart has encountered an error: A device which does not exist was specified.
See the System Event Log for more information.
What do I do?
Check if your disk is plugged in properly. If it’s plugged in properly it must be h hardware fault
first video that actually solved my problem, thanks bro
Did you lose your data?
@@kwalk205 Nah
man, u are a legend, tnx a lot for the help, I used 2nd option via diskpart
Happy to help
Every video I’ve watched has the same steps and none worked for me, I gave up and completely shut off my pc unplugged the drive and plugged it back in and it started working again.
Glad to hear
Hello. I have a serious question for you.
I have experienced a STRANGE HDD disk problem.
I turned on my two external 2TB WDs. Hard drives to install
(toshiba bluetooth stack) drives something that worked well. The machine was restarted and usb bluetooth worked fine. Then I had to access the external hdd to archive something. I couldn't get in for some strange reason and it said RAW on the disk in file explorer.
I restarted the machine and win11 did a short disk repair. Then the disk was back, except that I no longer had user access to the disk. i tried to give it this but in the middle of this process win11 reported that there was an error with the disk and could not continue.
I tried linux boot usb to try to access and read and copy from hdd but didn't get full permission to copy.
Then I tried the Android TV box I had (x96 air) which gave me 100% access to do what I wanted. But the problem was USB2 which is extremely slow and I never got over 10mb/s read speed.
Anyone know why this happened to me? why do I suddenly have to have user access. Shouldn't an external hdd work without user access?
bitlocker is off.
I am using win11 23h2
My HDD Samsung 2TB HD204UI
Try updating bios or changing the cable as well as the port
@@LotusGeek It's not that simple. Nothing wrong with the usb cable. And no new bios update for me.
Don't you think that what happened with my EXTERNAL HDD. was a little weird?
Strange that it worked flawlessly in Androud.
The ones I find strange is the way the error occurred.
At first win11 file explorer rapped the disk as RAW. and then it was automatically repaired by win 11 but now win11 requires user access something win11 is unable to give since win11 comes up with an error message when I tried.
But android is able to read the disk without any problems.
All other external USB HDDs work fine.
Yes, I have tried mounting the HDD inside the computer.
Yes seems strange.. try to connect it to another pc .. or check for bad sectors in hdd
Open cmd and type in
Chkdsk c: /f /r /x
Where c: is the drive letter of your damaged disk
I have installed Mini tool partition wizard. Disk 2 (my hard drive) showing 0.00GB. No options popping up when I right click on it.
It's likely your hard drive is failing. Try connecting it to another PC.
@@LotusGeek No Luck. Not showing up in other laptop. Help me bro
Tried Minitool ....but it doesn't allow me to right click on problematic dis and select "intialize to mbr disc"....Also it shows (Bad disk) on the side instead of unallocated. How do I go about this? Is there another way?
Check the health of drive using the same tool for bad sectors ..
Is there a solution when quick format displays the error the media is write protected?
Chances are your drive is damaged
Thank you so much Brother , I had a pendrive 64Gb , was facing this issue since 2021 , and I thought it's not going to fix . But finally I landed on this video really man thanks a lot . Thank you so much for saving my Pendrive. Thank you so much 🙏
Always welcome.. please support me by subscribing to my channel.. it would be great help for me 🙏🏻😊
Recover video is unavailable.@@LotusGeek
hello.... in my case drive letter not assign to hard disk and it not showing in my computer also.
so i cannot assign letter to it.
please resolve my problem.
Right click on start menu and choose disk management
In the interface right click on your drive and choose assign letter
Sir mere hdd open nhi ho rhi h apne btaya us type kiya but data error (cyclic redundancy check) bta rha h kya kru
It’s a hardware error. Your hdd is failing
Hy there, i just watched your video hoping to find a solution for my problem but unfortunately i haven`t been succesfull.
I bought on Amazon Ugreen CM578 M.2 NVMe Hard Drive Enclosure in which i installed fully working SSD with 512Gb of space.
The Ugreen Enclosure with SSD is recognised from the PC but not usable, i watched your video from start till the end and i did everything you explained but nothing happened.
i have installed Erase US Partition manager just like Mini Tool Partition Wizard and on both software my "Disc 2" is recognised but somehow i can`t do anything,i can`t format,optimise or anything on that disc and if i take SSD out of the enclosure and install it directly into a PC the same SSD is recognised and fully working.
What am i doing wrong, please help :(
Try checking the cables and compatibility with ssd
I have at home three PC's and it can't be that i'm having same problem on each every one of them, and by reading comments i'm not the only who has this problem.
Fully working! Thanks brother sooo much!!!!
You're welcome!
Will this losing data? I just skip the tutorials months ago and I tried to use this software then everything went backed it up, but second when it came back because of the stupid bsod. I went so mad that I’ve lost everything again, the thing is that lost partition doesn’t not shown since it’s either just a software glitch or hard drive is always a problem. So either way I’m afraid that Im not going to delete the file again. So Im just gonna go ahead and upload my operating system of vhdx to other thing where the files was stored.
Inhale clearly mentions if any method makes you loose data and even if you lose how you can recover it
Thanks Alot It Fixed My Issue😊❤
Happy to help.. please support me by subscribing to my channel.. it would be great help to me 😊🙏🏻
Let’s Gooooo Thanks Mannnn i follow step by step and that workss Perfectly Appreciate 🎉🎉🎉🎉
Happy to iep
Recover video is unavailable, I am stuck here.@@LotusGeek
how to chk which drive is that if its not showing
Open command prompt by click on start menu and type cmd
Type in
Diskpart
List disk
Here all disk will be shown.. check from the size of your disk
I made a Win11 installation USB Flash Drive. Using Diskpart, i made the installed SSD in the laptop the PRIMARY drive. Somewhere along the way, i put the wrong info in Diskpart, and now the SSD is lost! Diskpart cannot find it! How can i get Diskpart to find it? The drive is in the command prompt as X: It is a 512GB SSD. I need it to find it!
Change the drive letter in disk management
I have wd 1.5Tb hdd. In my case, its showing not initialized and same time not showing in this pc. In diskpart showing zero bytes
It’s damaged..
Solved!
Nothing worked until I disconnected the drive and allowed it to sit for a couple of minutes.
And when I reconnected it, it started working again.
Thank you.
Happy to hear it worked for you!
It says this disk contains system partition and converting this disk to MBR style may cause your system to be unbootable how do I fix this please?
If it’s your external disk go for it.. else don’t
Bro please help. After the message not initialized
I went on cmd and typed CHKDSK H: /R /F
[ cannot open volume for direct access ] was the message
Please help what to do next
This will help
Cannot open volume for direct access chkdsk
th-cam.com/video/mWUrQsnC_y8/w-d-xo.html
after format hdd can possible to recover our partition and all data please sir answer me
Possible but not 100%
Use easeus data recovery software to recover data
But how do I know which letter is if mine isn't even shown in explorer?
Check in disk management or check by the size of the drive
@LotusGeek
Ssd with only c partition in another laptop as windows os tried to use on desktop as external ssd with case.
Showing in disk management as Disk1 unknown not initislised and when initalise attempt "the request failed due to a fatal hardware error ".
Ssd connected external not showing anything in file explorer.
Its reading well in old system .
In diskpart list disk ... Its not showing .
Device manager showing " diskdrive Jmicron generic SCSI disk device "
How to make this ssd work ?
Its working In old system where its windows is installed
Try changing the port. Nextly open device manager by right click on start menu and choose device manager
Make sure there isn’t any exclamatory sign by subscribing expanding all the drivers
@@LotusGeek
not working .
can you give me email id ?
i will send screenrecord video .
it was 100% working m2 nvme ssd on a desktop with wind11 os just c drive .
i removed and try tp use that in laptop with its case.
case and cables working .
but in diskpart its listed as Disk1 0mb 0mb .when try to initialise saying " failed due to fatal hardware error "
What if the Ext HDD drive letter not showing in My computer?
Create one by right click
How to create it also not appear on my Pc
I’m having same problem. The ssd doesn’t not have a drive letter and mine is showing incorrect function whenever I want to initialize it. Please help
@@myleneilustrisimo9178did you find fix?
Bro my pendrive is unallocated and not able to allocate a letter and it has virus please resolve this issue
Format and then recover data
what if the disk 1 size is 0 b is it broken?
Yes hardware fault
My drive dont have name because i can only see it in the disk management
You will see name in Diskpart
bro idk what letter was my disk it didnt show
Open cmd as an admin and type:
Diskpart
List disk
Here you can verify the letter by the space
@@LotusGeekIt just says Disk 0 and Disk 1 for me any other options?
did you find a fix
@@NakuHDi figured it out
Diskpart> List volume
(You will see volume number but no letter)
Diskpart> select volume (whatever number)
Diskpart> assign letter=(whatever letter)
@@Nimbuus_ bro i did this and my drive D showed but is shows 400mb only how to get back the gb sized?
Thanks my additional was’t showing
Glad it worked out
bro it says bad disk so I cant right click it
It’s hardware issue
@@LotusGeek that means my hdd is broken?
Seems corrupted or broken.. check Heath using easeus partition master or crystal disk info
Thank you so much 🎉
You’re welcome 😊
My disk one is not showing in the list disk
It’s damaged
@@LotusGeek it working when connected internally
Check for bad sectors .. use easeus partition master to else click on start menu and type memory diagnostic
Launch the program and restart (as it say)
@@LotusGeek i had set password to my harddisk does it may be the issue
Thanks you brother😊😊
Welcome 😊
Please help me when I type convert gpt cmd I get an error msg saying “Diskpart has encountered an error: Data error (cyclic redundancy check)"
Your hard disk is failing.. better to replace it
@@LotusGeekMine is Access denied, because hdd lock. Any help?
@khekbig check any lock button in your hdd
@@LotusGeek i dont think there is any button on HDD, PC or Laptop
Thank you so much ❤❤❤❤
Always welcome
goood bro its works perfectly
Happy to help
Link in discription, not working for recovery 😅
Working on it.. soon release the new update
Recover data link not working
Sorry bro.. this video removed by TH-cam.. I m preparing for the new video that helps recovering data.. soon ll share the link
@@LotusGeekwhere is the link for recovery data
Hi..can i get a number of ur shop i need to show my ssd
Sorry dear no shop.. if it’s not working you can recover your data. Watch this tutorial and use method 3-
Recover data after formatting harddisk
th-cam.com/video/f6AeTX1RB8A/w-d-xo.html
Thanks a lot for this.
Always welcome
This is problem
What’s the error?? Please specify to help you
Not Initialized or Unallocated
If these method doesn’t work you than you have hardware fault
thank you
Cmd working 👍
Data error(cyclic redundancy check)....
Pls fix this problem 🙏
Cyclic redundancy error comes due to failing harddisk
@@LotusGeek So,my hard disk not use ?
It’s one of the Possible cause.. make sure to backup your harddisk cause you never know when it stopped working
How to open hdd
Yes beckup le rkha h
Hai