Hello Sir, thank you so much maintenace video. by the way I have a 2012 RMZ250, that engine has two drain bolts under the Engine. so usually I take out these bolts and don' t take out the side bolt. way are you not take out the bottom drain bolt at the front side? from Japan
hey thanks for the video, i have a suzuki 250 rmz 2011, it's a same instruction for my bike ? i use 10W50, what do you think about this oil? (Sorry i'm fench) thanks for you ask
The bolt that he took out at 1.13 in the video does anyone know what that bolt is called? Can’t find it anywhere the bolt that I had I took it out and lost it.
quisiera aser una consulta como ariapara traer unos repuestos de la zusukimrz 250 año 2007 a mi pais peru ,necesito anillos ,filtro de aceite y retenes esero una repuesta amigos
+streyteam all goods mate. Still a great how to video. Also to i am 14 going onto 15 and i have a crf150rb and was thinking about getting a rmz 250. What do u recon? Cheers.
I have a 2008 rmz 250, i just got it. is their a transmition oil and engine oil? or is it all shared. the fill Is on the clutch cover that I know. let me know thank you:)
typical everyone overlooks the oil strainer with the magnet in it.. it also realises alot more oil.. plus it will have many shards of metal that need removing and cleaning to perfection every oil change.
every other ride or race ~ some change it after every race but we never had any problem's with break downs we had three bikes running and all went good Thanks Man
+Paul Bordelon so when you start the bike the oil flow dose not stop to the rest of the engine while it fills up the filter iv always done that for my trucks too my ford filter almost holds one quart or oil by itself
guys you have to clean your mess up!! dont let the oil sit on the engine and shit and especially CLEAN THE OIL WHERE THE OIL FILTER WAS! this guy did not do any of this! this is a bad tutorial!
we have been racing 3 bikes and 3 racers for ten years it seems to have worked for us no break downs other then a top end on our two strokes going out years back
Streyteam - my son & I used your video to change the oil in his RMZ 250......easy to follow and very helpful. Great father/son time!! Thanks so much
05:02 you must clean the contaminated oil on the housing!!
Do you need to open the drain plug on the side?
does this video help for my suzuki rmz 250 2006 ?
Same for the 2007 ?
Hello Sir, thank you so much maintenace video. by the way I have a 2012 RMZ250, that engine has two drain bolts under the Engine. so usually I take out these bolts and don' t take out the side bolt. way are you not take out the bottom drain bolt at the front side? from Japan
hey thanks for the video, i have a suzuki 250 rmz 2011, it's a same instruction for my bike ? i use 10W50, what do you think about this oil? (Sorry i'm fench) thanks for you ask
The bolt that he took out at 1.13 in the video does anyone know what that bolt is called? Can’t find it anywhere the bolt that I had I took it out and lost it.
Great vid. Gonna change my oil and filter real soon.
what specific oil was used in this video i couldn't quite tell
quisiera aser una consulta como ariapara traer unos repuestos de la zusukimrz 250 año 2007 a mi pais peru ,necesito anillos ,filtro de aceite y retenes esero una repuesta amigos
I was hoping to see how you removed and cleaned the screen behind the shifter but you skipped that step. Do you ever remove it and clean it?
Thanks this help a lot
Awesome video again keep it up👌👌
Thanks Man I used to have a good song on it then youtube took it off
+streyteam all goods mate. Still a great how to video. Also to i am 14 going onto 15 and i have a crf150rb and was thinking about getting a rmz 250. What do u recon? Cheers.
What oil did you use
Great video!! It helped me a lot!!!
good engine sound! DirtBike forever!
Best video ever
this is the same for an 09 rmz250 yeah?
Is it the same thing on a 2010 RMZ 250 fuel injected?
what if you overfill your oil and its at the top of the sight glass? how can youbdrain a little to make it at acceptable level?
just loosen the oil plug alittle so some oil seeps out slowly and recheck oil level
was hoping there was a less messy way of achieving that haha :)
@@streyteam how do you see oil level on a suzuki 250??
There is so “sight glass” on an RMZ250.
WhY to put it in tdc?
i don't get it you drain 2 reservoirs but only fill up 1 with new oil or am i wrong please explain. is this for the gears and engine oil ?
Suzuki share the same oil on both sides so yes one fill hole but on my crf450r I have two fill holes & caps
thanks i was confused cuz on all my other bikes i had to get different oil for the gears
Excellent video! Do you know where can i find the service manual of the SUZUKI RMZ 250 2010? Thanks a lot!
I saw some on Ebay and thanks for the comment
what size is the TDC plug??
I have a 2008 rmz 250, i just got it. is their a transmition oil and engine oil? or is it all shared. the fill Is on the clutch cover that I know. let me know thank you:)
+tallandshortshow We have a 2007 and 2008 the oil is shared on both sides ( my Honda has two sides )
How is the posey motor i plan to have al posey do my 13 rmz 250
hes the best great guy
He is still motor huh, you have his contact number I lost it i believe he is in auburn now
I have a 2014 Rmz 250 do i do the same thing just like you did on this video for my oil change?
+GUSTAVO CORTES I don't know if or what they changed on the 2014 sorry ours are older
ok thank you ,I appreciate you getting back to me,also liked your video good job..
perfect instructions, thanks!
Your welcome ~ thanks for watching and comment
streyteam i just got a 2008 from a guy blew up 2nd day, has a new rod, oil filter, rings and cylinder, how much oil should i use 1000ml?
@@GunsGadgetsMoto I hope you got it all sorted being 7 years later and all but yes you should.
is this the same for the 2012 rmz250
typical everyone overlooks the oil strainer with the magnet in it.. it also realises alot more oil.. plus it will have many shards of metal that need removing and cleaning to perfection every oil change.
vevohoeyo please make a video showing how to do it properly
My 2014 RM Z250 has 2 different oil strainers that have to be cleaned every oil change.
Do they really have to be? My bottom filter bolt is stripped...ugh
How often do you change the oil?
every other ride or race ~ some change it after every race but we never had any problem's with break downs we had three bikes running and all went good Thanks Man
so many people half arse the oil changes this is a pretty average display of how things should be done
Why soak the filter in oil
+Paul Bordelon so when you start the bike the oil flow dose not stop to the rest of the engine while it fills up the filter iv always done that for my trucks too my ford filter almost holds one quart or oil by itself
Why not overtighten?
You can strip out the threads very easy
streyteam ok :)
Glory Days!
For what is the Second Oil plug?
to get all the oil out of the block
@@streyteam do you reinstaöl the second when All is out ore bevor and How much oil did you Took With the Filter, 950 ml ?
That was a sloppy oil change... lol
add a video to change the oil in the gearbox :D
That is the gearbox
guys you have to clean your mess up!! dont let the oil sit on the engine and shit and especially CLEAN THE OIL WHERE THE OIL FILTER WAS! this guy did not do any of this! this is a bad tutorial!
we have been racing 3 bikes and 3 racers for ten years it seems to have worked for us no break downs other then a top end on our two strokes going out years back
You get a thumb down for the awful din playing in the background.
youtube copyright the original song so I had to do their music I agree with you Fred